Polarization modification of PZT thin films by means of electric fields and stress in scanning force microscopy

Polarization switching in scanning force microscopy (SFM) is influenced by both electric fields and stress, whereby the latter can arise inherently from Maxwell stress. We discuss the influence of electric charges and of the polarization asymmetry on the switching behaviour. For single crystallites of PZT(53/47) thin films, the sectors for ferroelectric, ferroelastoelectric and ferroelastic switching are represented in a field-stress map. The influence of stress on the second harmonic of the SFM is also discussed.     

制备工艺对Zn1-xMgxO薄膜结构及光学性能的影响

采用脉冲激光沉积（PLD）方法在单晶Si（100）衬底上沿c轴方向生长单晶Zn_1-xMg_xO薄膜,通过X射线衍射（XRD）、原子力显微镜（AFM）、扫描电镜（SEM）和荧光光谱（PL）研究了膜厚、Mg含量、退火温度及氧气氛等制备工艺对Zn_1-xMg_xO薄膜的结构、形貌和光学性质的影响.实验结果表明,Mg含量x≤0.15时, Zn_{关键词： 1-x}Mg_xO薄膜')" href="#">Zn_1-xMg_xO薄膜 制备工艺 结构 光学性质     

高温超导滤波器的光刻工艺

根据高温超导薄膜的特点,详细讨论了制备高温超导滤波器的光刻技术及在制备的各环节中需注意的问题,实验结果表明:此种方法提高了制备的成功率。     

SiC缓冲层对Si表面生长的ZnO薄膜结构和光电性能的改善

用脉冲激光沉积(PLD)技术制备了ZnO/SiC/Si和 ZnO/Si薄膜并制成了紫外探测器。利用X射线衍射(XRD),光致发光(PL)谱,I-V曲线和光电响应谱对薄膜的结构和光电性能进行了研究。实验结果表明:SiC缓冲层改善了ZnO薄膜的结晶质量和光电性能,其原因可能是SiC作为柔性衬底能够减少ZnO与Si 之间大的晶格失配和热失配导致的界面缺陷和界面态。     

High temperature thermoelectric properties of highly c-axis oriented Bi₂Sr₂Co₂O_y thin films fabricated by pulsed laser deposition

High-temperature thermoelectric transport property measurements have been performed on the highly c-axis oriented Bi2Sr2Co2Oy thin films prepared by pulsed laser deposition on LaAlO3(001).Both the electric resistivity ρ and the seebeck coefficient S of the film exhibit an increasing trend with the temperature from 300 K-1000 K and reach up to 4.8 m·Ω· cm and 202 μV/K at 980 K,resulting in a power factor of 0.85 mW/mK which are comparable to those of the single crystalline samples.A small polaron hopping conduction can be responsible for the conduction mechanism of the film at high temperature.The results demonstrate that the Bi2Sr2Co2Oy thin film has potential application in high temperature thin film thermoelectric devices.     

Functional Fe–Pd nanomaterials synthesized by template-assisted methods

In this work, we highlight our recent progress in the synthesis and characterization of functional nanomaterials based on Fe–Pd ferromagnetic alloys by means of template-assisted deposition techniques employing highly ordered nanoporous alumina membranes, such as ordered arrays of nanowires and antidots thin films. Special attention is paid on their basic magnetic properties, such as coercivity, remanence and magnetic anisotropy, and their dependence on the microstructure and morphological parameters of the ordered arrays.     

Investigation of structural and optical properties of ZnO films co-doped with fluorine and indium

Undoped ZnO film and ZnO films, which are co-doped with F and In (FIZO) at different concentrations, were synthesized by sol–gel technique and the effects of co-doping of F and In on structural and optical properties of ZnO thin films were investigated. The concentration ratio of [F]/[Zn] was altered from 0.25 to 1.75 with 0.50 step at.% mole and [In]/[Zn] was altered from 0.25 to 1.00 with 0.25 step at.% mole. X-ray diffraction analysis indicates that the films have polycrystalline nature and the (0 0 2) preferred orientation is the stronger peak. No extra phases involving zinc, fluorine and indium compounds were observed even at high F and In content. The grain size of undoped ZnO and FIZO thin films varied between 15 and 20 nm with a small fluctuation. From the SEM images, although the undoped ZnO had a smooth and particle-shaped surface, FIZO films had nanofiber-networks shapes over the surface with average size of 500 nm. The surface morphologies and crystallite sizes for the F and In doped films were slightly different from than those of undoped film. From the optical study, a slight shrinkage of band gap was backwardly observed from 3.36 to 3.25 eV with the increasing of F and In content.     

Influence of substrate temperature and Cobalt concentration on structural and optical properties of ZnO thin films prepared by Ultrasonic spray technique

Pure and Cobalt doped zinc oxide were deposited on glass substrate by Ultrasonic spray method. Zinc acetate dehydrate, Cobalt chloride, 4-methoxyethanol and monoethanolamine were used as a starting materials, dopant source, solvent and stabilizer, respectively. The ZnO samples and ZnO:Co with Cobalt concentration of 2 wt.% were deposited at 300, 350 and 400 °C. The effects of substrate temperature and presence of Co as doping element on the structural, electrical and optical properties were examined. Both pure and Co doped ZnO samples are (0 0 2) preferentially oriented. The X-ray diffraction results indicate that the samples have polycrystalline nature and hexagonal wurtzite structure with the maximum average crystallite size of ZnO and ZnO:Co were 33.28 and 55.46 nm. An increase in the substrate temperature and presence doping the crystallinity of the thin films increased. The optical transmittance spectra showed transmittance higher than 80% within the visible wavelength region. The band gap energy of the thin films increased after doping from 3.25 to 3.36 eV at 350 °C.     

Bioglass thin films for biomimetic implants

Pulsed laser deposition (PLD) method was used to obtain bioglass (BG) thin film coatings on titanium substrates. An UV excimer laser KrF* (λ = 248 nm, τ = 25 ns) was used for the multi-pulse irradiation of the BG targets with 57 or 61 wt.% SiO₂ content (and Na₂O-K₂O-CaO-MgO-P₂O₅ oxides). The depositions were performed in oxygen atmosphere at 13 Pa and for substrates temperature of 400 °C. The PLD films displayed typical BG of 2-5 μm particulates nucleated on the film surface or embedded in. The PLD films stoichiometry was found to be the same as the targets. XRD spectra have shown, the glass coatings obtained, had an amorphous structure. One set of samples, deposited in the same conditions, were dipped in simulated body fluids (SBFs) and subsequently extracted one by one after several time intervals 1, 3, 7, 14 and 21 days. After washing in deionized water and drying, the surface morphology of the samples and theirs composition were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), IR spectroscopy (FTIR) and energy dispersive X-ray analysis (EDX). After 3-7 days the Si content substantially decreases in the coatings and PO₄³⁻ maxima start to increase in FTIR spectra. The XRD spectra also confirm this evolution. After 14-21 days the XRD peaks show a crystallized fraction of the carbonated hydroxyapatite (HAP). The SEM micrographs show also significant changes of the films surface morphology. The coalescence of the BG droplets can be seen. The dissolution and growth processes could be assigned to the ionic exchange between BG and SBFs.