Supramolecular Assembly Formation in Monolayers of tert-Butyl Substituted Copper Phthalocyanine and Tetrabenzotriazaporphin

The effect is studied of the layer formation conditions on the molecular arrangement of copper tetra- tert-butyl phthalocyanine (CuPctBu₄) and copper tetra- tert-butyl tetrabenzotriazaporphin (CuThptBu₄) at the air–water interface. The decrease in initial surface concentration of these compounds is shown to affect the molecular orientation, as indicated by the increase in the area per molecule. The data are interpreted in terms of formation of CuPctBu₄ and CuThptBu₄ monolayers with a face-on molecular arrangement when the initial surface concentration is sufficiently small (N less than 1.6 × 10^–7 mole/m² for CuPctBu₄ and N less than 4 × 10^–7 mole/m² for CuThptBu₄) and changes in the molecular orientation to edge-on when the N values are higher. It is emphasized that the edge-on orientation on the water surface is not only a molecular but a collective property of the azaporphyrine supramolecular assembly.     

Control of optical properties of gel-derived oxide coating films containing fine metal particles

Control of the optical properties of gel-derived oxide films containing fine metal particles is described. The duration of the aging of Si(OC₂H₅)₄-derived sols and the amount of water for hydrolyzing Si(OC₂H₅)₄ were found to greatly affect the size and the shape of Au particles formed in the silica matrix, and accordingly the optical absorption of the Au/SiO₂ composite films. Employing dielectric media with high refractive indices like TiO₂ was shown to shift the absorption peak of Au particles to longer wavelengths. Pd/TiO₂ and Pt/TiO₂ composite films showed absorption in the visible region.     

Deposition of complex multielemental thin films

Modern condensed-matter physics is increasingly concerned with the design, synthesis, analysis, and exploitation of chemically complex materials and structures. Complex metal oxides and strongly correlated electron systems such as YBa₂Cu₃O_7−x and La_1−xSr_xMnO₃ are paradigmatic examples. Their production in the form of high-quality thin films is of both technological and fundamental importance and has stimulated a concerted effort in the last two decades to find and optimize efficient techniques to this end. This review discusses the physics behind and the requirements for synthesizing high-quality films of such materials and examines fundamental aspects of the growth processes associated with magnetron sputtering and pulsed laser deposition, the two techniques which presently offer the best solutions in this burgeoning field.     

Mass spectrometric study of thermal stability of copper(II) bis(dipivaloylmethanate) vapour

The processes of thermal destruction of copper(II) bis(dipivaloylmethanate) (Cu(dpm)₂) in the temperature range 150°–550°C were studied by using a two-temperature variant of a double chamber Knudsen cell, with mass spectrometric recording of the gas-phase composition. The temperature range of stability of the vapour of the complex in vacuum was determined, as were those of its mixtures with oxygen in different proportions. The temperature dependence of the rate constant of the thermolysis of (Cu(dpm)₂) vapour was obtained. The thermal stability of Hdpm vapour and the influence of oxygen on the thermolysis of the ligand were studied.

---

Zusammenfassung Unter Verwendung einer Zweitemperaturenvariante der Knudsenschen Doppelkammerzelle wurde mittels MS-Untersuchung der Gasphasenzusammensetzung im Temperaturbereich 150°–550°C der thermische Abbau von Kupfer(II)-bis(dipivaloylmethanat) (Cu(dpm)₂) untersucht. Es wurde der Temperaturbereich für die Stabilität der gasförmigen Komplexe in Vakuum sowie in Gemischen mit Sauerstoff in verschiedenen Verhältnissen bestimmt. Dabei wurde die Temperaturabhängigkeit der Geschwindigkeitskonstante für die Thermolyse von Cu(dpm)₂ ermittelt. Weiterhin wurde die thermische Stabilität von Hdpm-Dampf sowie der Einfluß von Sauerstoff auf die Thermolyse der Liganden bestimmt.

     

Ordered porous films based on fluorinated polyimide derived from 2,2′-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride and 3,3′-dimethyl-4,4′-diaminodiphenylmethane

One of fluorinated polyimides was synthesized from 2,2′-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA) and 3,3′-dimethyl-4,4′-diaminodiphenylmethane (DMMDA) by two-steps method, which had good solubility and hydrophilicity. 6FDA-DMMDA polyimide was dissolved in chloroform (CHCl₃) and cast on a glass substrate in a humid atmosphere. It was found that 6FDA-DMMDA/CHCl₃ solution was easy to form ordered porous structure at high concentration, and the reason was discussed in detail. In addition, the influences of solution concentration, the atmosphere humidity, were also tested.     

Functional Polyoxometalate Thin Films via Electrostatic Layer-by-Layer Self-Assembly

Polyoxometalates (POMs) comprise a structurally diverse class of inorganic transition metal oxygen clusters which—owing to their unique electronic properties—hold promise for a host of technological applications such as electrochromic windows, sensors, or heterogeneous catalysts, prototypic examples of which will be briefly exemplified. The integration of POMs into functional architectures and devices, however, necessitates the development of general methods that allow positioning these clusters in well-defined supramolecular architectures, thin films, or mesophases. This short review highlights recent advances in the preparation of composite multilayers fabricated by electrostatic layer-by-layer self-assembly (ELSA) of POMs and a variety of water-soluble cationic species, including transition metal complexes, cationic surfactants, polycations and bipolar pyridine.     

Vanadium Doped Sol-Gel TiO2 Coatings

A study of the experimental conditions required to obtain vanadium doped sol-gel TiO2 coatings is presented. Tetraethyl orthotitanate was employed as the TiO2 source and VCl3, VOSO4 · H2O and VOSO4 dissolved H2SO4 where employed as vanadium sources.Dip coating has been used to produce coatings on silicon wafers, spectral carbon electrodes and titanium electrodes. Both supported and unsupported films have been studied by UV-Vis spectra, IR spectroscopy and X-ray diffraction (XRD). The measurements have been made on samples as prepared and treated thermally at temperatures between 100°C and 300°C. The thermal treatment temperatures have been established from DTA/TGA measurements.The vanadium doped sol-gel TiO2 coatings have been tested as sensors for redox potential measurements in electrochemical processes. The influence of both the thickness of films and the nature of substrate has been investigated.     

A mesoporous Pt/TiO2 nanoarchitecture with catalytic and photocatalytic functions

A novel metal/semiconductor nanocomposite with catalytic and photocatalytic functions has been prepared. The new material consists of highly dispersed platinum (Pt) nanoparticles embedded in a cubic mesoporous nanocrystalline anatase (meso-nc-TiO2) thin film. The porous thin film possesses a narrow pore-size distribution and a large surface area. The diameter of the Pt cluster can be controlled to below 5 nm, and the high dispersion of these clusters gives rise to catalytic activity for the oxidation of carbon monoxide, an important reaction for automobile exhaust treatment. This novel ordered mesoporous Pt/TiO2 nanoarchitecture is also a promising photochemical material, as demonstrated by the photo-driven killing of Micrococcus lylae cells on the film.     

Electrocatalytic properties of Au(111)-Pd quasi-single-crystal film electrodes as probed by ATR-SEIRAS

Electrochemical and electrocatalytic properties of thin films Au(111-25 nm), which are quasi-single-crystal electrodes 25 nm thick made of gold with the (111) preferential orientation, and same electrodes modified with a monolayer (ML) of palladium are studied in 0.1 M solutions of HClO₄ and H₂SO₄ employing voltammetric techniques and surface enhanced infrared reflection absorption spectroscopy (ATR-SEIRAS). Spectroscopic experiments demonstrate strong adsorption of electrolyte species (H₂O, OH_ads, anions) on the Pd surface. The weak and reversible adsorption of CO on Au(111-25 nm) does not change the interfacial-water structure. Adsorption of CO on the Pd-modified film results in an irreversibly adsorbed CO adlayer stabilized by co-adsorbed isolated water species. Various electrooxidation mechanisms are discussed. Electrochemical and spectroscopic investigations on the adsorption and electrooxidation of HCOOH on bare and 1 ML Pd-Au(111-25 nm) electrodes reveal that electrooxidation proceeds in both cases via a direct or dehydrogenation pathway. This mechanism involves the formation of formate as intermediate, which is detected by in situ ATR-SEIRAS. The reactivity on Pd-modified surfaces is higher than on bare gold. The specifically adsorbed anions (sulfate/bisulfate) and the oxide formation on the substrate surface lower the reactivity for CO and HCOOH on both surfaces. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 11, pp. 1312–1329. Based on the report delivered at the 8th International Frumkin Symposium “Kinetics of the Electrode Processes,” October 18–22, 2005, Moscow. The text was submitted by the authors in English.     

Characterisation and ac-electrical investigation of sublimated bis(dimethylglyoximato)palladium(II) thin films

Thin films of bis(dimethylglyoximato)palladium(II) complex of polycrystalline structure were prepared by sublimation in a vacuum at 140 °C, on glass and p-Si substrates. The films were characterised by spectral optical absorption, energy dispersion X-ray fluorescence (EDXRF), and X-ray diffraction (XRD) methods. After characterisation, metal-insulator (complex)-semiconductor MIS devices were fabricated to measure the frequency dependence of ac-conductivity in a range of 5-100 kHz. Data of ac-measurements follow the correlated barrier-hopping CBH model, from which one of the fundamental absorption peaks, the minimum hopping distance, and other parameters of the CBH model were determined, connecting and relating the optical, structural, and electrical measurements. The dielectric properties of the complex were studied through Debye model, from which the relaxation time for the dipoles (2.45 × 10⁻⁶ s) and the molecular dipole moment (3.63 × 10⁻³⁰ C m ) were determined.