Cyclodextrin-enhanced in situ bioremediation of polyaromatic hydrocarbons-contaminated soils and plant uptake

In situ bioremediation of polycyclic aromatic hydrocarbons (PAH) polluted soils can be improved by the augmentation of degrading microbial populations and by the increase of hydrocarbon bioavailability. β-cyclodextrin (β-CD) significantly accelerate the induction of hydrocarbon biodegradation, but it is not still clear its effectiveness during final, slower stages of degradation. Moreover, it is yet not known if the PAH uptake from plants is influenced by the presence of CD. A field study was carried out by creating two plots (A and B). Diesel fuel was spread on the surface, and on plot B a commercial microbial consortium and β-CD were spread. Soybean was seeded in both plots. Soil samples were withdrawn every 10 cm layers from 0 to 60 cm depth, before fuel spreading, immediately after seeding and after soya harvesting. Chemical and microbial analyses were carried out throughout the process to characterize the soil and to determine residual PAHs. Soybean seeds were analyzed for PAH content. It was observed that β-CD induced a significant increase of PAH degradation rate. The microbial inoculum did not improve the degradation; biodegradation activity was strong in superficial layers, and some PAH leaching was observed, that was reduced by CD. The analysis of PAH in soyabeans revealed that an uptake of hydrocarbons occurred, and that it was more significant in plot B. This suggests that the β-CD-enhanced bioremediation process can further be improved by phytoremediation, that could also allow to simultaneously reach an additional profit from a non-food yield for biofuel production.     

Trace analysis of volatile polar organics by direct aqueous injection gas chromatography

Summary Procedures for the quantitative analysis of industrial effluents which involve concentration by solvent extraction or the purge-and-trap method are time-consuming, labor-intensive, and prone to error. Direct aqueous injection gas chromatography using an electron-capture detector for the analysis of volatile halocarbons at the ppb level is in routine use in many laboratories. We now discuss the development of a similar protocol for the analysis of volatile polar organics such as acetone, methyl ethyl ketone, methyl isobutyl ketone, and tretrahydrofuran using a flame-ionization detector.     

Increase in removal of polycyclic aromatic hydrocarbons during bioremediation of crude oil-contaminated sandy soil

A 2³ full factorial experimental design was adopted to estimate the effects of three variables on the biodegradation of oil during soil bioremediation: bioaugmentation seeding a mixed culture, addition of fertilizer or mineral media, and correction of initial pH of the soil to 7.0. The tests were carried out in polyvinyl chloride reactors with 5.0 kg of crude oil-contaminated soil at 14 g/kg. After screening the variables, soil bioremediation tests were conduced with varied C:N ratios, yielding an increase in biodegradation of the oil heavy fraction from 24 to 65%, consumption of total n-paraffins, and a remarkable decrease in the concentration of residual polycyclic aromatic hydrocarbons of the soil.     

Amide interactions in chlorinated solvents

Enthalpies of solution and of transfer of amides for the solvents chloroform (CHCl₃), methylenechloride (CH₂Cl₂), carbontetrachloride (CCl₄), cyclohexane (C₆H₁₂), N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMA), and ethylacetate (EtOAc) have been used to isolate and quantify the solvation interactions of amides in chlorinated solvents. Specific interactions at the aminde carbonyl and N–H groups have been identified. An analysis of the transfer enthalpies of pyrrole and methylpyrrole from cyclohexane to the chlorinated solvents shows that specific interactions between the pyrroles and these solvents are similar in nature. A means of calculating differences in the transfers of different solutes between the same solvent pair is given.Work done at Lebanon Valley College.     

Stimultaneous quantitative analysis using dual capillary columns of different polarities

Complex organic mixtures, such as coal liquefaction and oil shale products and by-products, are comprised of hundreds or thousands of individual components. State-of-the-art high resolution gas chromatography does not always provide sufficient resolution to allow accurate quantitation or identification of many compounds of interest. The concept of dual capillary column chromatography combines the different resolving characteristics of two capillary columns coated with different stationary phases into a single chromatographic run. In this approach, both columns are connected to the same injection port. Analysis of complex mixtures in this fashion can confirm the identification and quantitation of components on two columns of different polarity with little increased analysis time, can provide a means of obtaining quantitative data for individual components which are known to coelute on any one column, and can alert one to unknown coelution problems that would be undetected by gas chromatographic analysis on a single capillary column. Simultaneous dual column analysis was applied to three samples, the neutral polycyclic aromatic hydrocarbon (PAH) fraction of a Solvent Refined Coal-II (SRC-II) heavy distillate, the nitrogen-containing polycyclic aromatic compound (N-PAC) fraction of an SRC-II heavy distillate, and the basic fraction from a shale oil process water. Fused silica capillary columns coated with SE-54 and Durawax 3 were used for the analyses of the heavy distillate, while SE-54 an Carbowax 20M capillary columns were used for the analysis of the process water.     

Analysis of heavy organic pollutants of confined atmospheres

Summary An improved procedure for the determination of the less volatile air pollutants of recycled closed atmospheres by activated carbon-Soxhlet extraction is proposed. After total treatment of desorbate, PAH determination is then accomplished by RP-HPLC using both adsorptiometric and fluorimetric UV detection; phenolic compounds are determined by GC-MS.This technique is suitable for very low levels of PAH and phenolic compounds.     

Development of a systems analysis approach for resolving the structure of biodegrading soil systems

An experimental and mathematical method is developed for the microbial systems analysis of polyaromatic hydrocarbon (PAH)-degrading mixed cultures in PAH-contaminated “town gas” soil systems. Frequency response is the primary experimental and data analysis tool used to probe the structure of these complicated systems. The objective is to provide a fundamental protocol for evaluating the performance of specific mixed microbial cultures on specific soil systems by elucidating the salient system variables and their interactions. Two well-described reactor systems, a constant volume stirred tank reactor (CSTR) and a plug flow differential volume reactor, are used in order to remove performance effects that are related to reactor type as opposed to system structure. These two reactor systems are well-defined systems that can be described mathematically and represent the two extremes of one potentially important system variable, macroscopic mass transfer. The experimental and mathematical structure of the protocol is described, experimental data is presented, and data analysis is demonstrated for the stripping, sorption, and biodegradation of napththalene.     

Development of a pulsed-laser,fiber-optic-based fluorimeter: determination of fluorescence decay times of polycyclic aromatic hydrocarbons in sea water

A fiber-optic-based system for remote measurement of time-resolved fluorescence emission spectra is described and characterized. A pulsed nitrogen laser is used to induce fluorescence and a time-gated, one-dimensional photodiode array is used to measure the decay of the fluorescence emission spectra. The results compare favorably with reported values for well characterized compounds having fluorescence decay times in the range 4–50 ns. The potential of using time-resolved fluorimetry (TRF) over fiber-optic cables as a means of improving the specificity of remote fluorescence determinations of spectrally similar polycyclic aromatic hydrocarbons in sea water is demonstrated.     

A theoretical study of the interactions between N, N-dimethylformamide and aromatic hydrocarbons

The B3LYP and MP2 methods with 6-31G* basis set were used to predict the geometries of N, N-dimethylformamide (DMF) dimer and DMF–aromatic hydrocarbons interaction systems. A total of 10 conformers were obtained with no imaginary frequencies, respectively. The interaction energies of these binary mixtures have been obtained. The analyses of chelpg charge distribution and the atoms in molecules theory (AIM) were used to analyze the nature of the interaction. The results show the presence of hydrogen bonds between DMF and aromatic hydrocarbons. The interaction between DMF and benzonitrile is the strongest with the interaction energy of −21.58 kJ mol⁻¹ (BSSE corrected), and the intensity order of interactions is DMF–benzonitrile: d2 > DMF–DMF: a2 > DMF–toluene: c1 > DMF–benzene: b2.     

复合催化剂上CO2加氢合成C2烃类

介绍了由CO₂+H₂合成C2⁺烃的几种复合催化剂体系的研究进展，比较和评价了复合催化剂体系的活性和选择性及对C2⁺烃类生成的影响。着重于复合催化剂体系对C4⁺烃的生成及产物分布的影响并简述反应机理。