FFC-1离子交换纤维对酸碱有害气体吸附性能的研究

系统考察了不同直径及反离子形式的FFC-1聚羧酸离子交换纤维对酸碱有害气体的穿透吸附,各种温、湿度条件下的吸水率,以及作为有害气体吸附滤除材料的重复使用与再生性能。研究表明:FFC-1纤维直径的减小有利于提高对有害气体的动态吸附容量。在体系温度、相对湿度分别为15℃、50%时,以3D腈纶为起始原料的钠型FFC-1离子交换纤维的吸水率≥350mg/g.纤维;对SO2的穿透吸附容量可达200mg/g.纤维。FFC-1离子交换纤维具有良好的重复使用与再生能力,经20次再生循环使用后,纤维交换容量未见明显变化。     

Constitution moleculaire d'α,ω-difluoropolydimethylsiloxanes equilibres obtenus par une reaction de redistribution

α,ω-Difluoropolydimethylsiloxanes F[(CH₃)₂SiO]_n(CH₃)₂SiF have been prepared by reaction of (CH₃)₂SiF₂ with cyclic dimethylsiloxanes [(CH₃)₂SiO]_n (n = 3 or 4). An equilibrium is reached in the redistribution of fluorine vs. oxygen atoms after ca. 24 h at 200°C or 15 days at 150°C when catalysed by AlCl₃. 16 equilibrated samples of varied (R = F/Si) overall compositions have been analysed by ¹H and ¹⁹F NMR and by VPC. The presence of rings has been established for the lower values of R. The molecular constitution of the equilibrated samples is described by a set of constants. The abundance of the end units

is slightly larger than expected from random distribution. The good resolution of the spectra permits the distinguishing of the 9th order of environment of the end units and the 5th order for the middle units and the verification that there is no preferential association among the building units, and thus the proportion of chains of various lengths obeys Flory's random distribution mode. The equilibrium molecular constitution of these α,ω-difluorosiloxanes is close to that of their dichloro analogs; the substitution of chlorine by fluorine atoms at the end of the chains thus appears to cause little perturbation. On the other hand, the kinetic evolution of the reaction appears to be different, since the first species which forms is always the pyro molecule

instead of long chains and large rings as in the case of the chloro analogs.     

Synthesis and polymerization of N-[N′-(α-methylbenzyl)aminocarbonyl-n-alkyl]maleimide

Two types of optically active N-[N′-(α-methylbenzyl)amino/carbonyl-n-alkyl]maleimides (MBAC) were synthesized from maleic anhydride, 6-amino-n-caproic acid (or 12-amino-n-dodecanoic acid), and (R)-(+)-α-methylbenzylamine. Radical homopolymerizations of MBAC were performed in several solvents at 60 and 110°C for 24 h to give optically active polymers. Radical copolymerizations of MBAC were performed with styrene (ST) and methyl methacrylate (MMA) in dioxane at 60°C. The monomer reactivity ratios and the Alfrey-Price Q-e values were determined. Chiroptical properties of the polymers and copolymers were investigated. © 1995 John Wiley & Sons, Inc.     

Trifluoroacetic acid: a more effective and efficient reagent for the synthesis of 3-arylmethylene-3,4-dihydro-1H-quinolin-2-ones and 3-arylmethyl-2-amino-quinolines from Baylis-Hillman derivatives via Claisen rearrangement

Trifluoroacetic acid has been discovered to be a highly effective and efficient reagent for the tandem Claisen rearrangement and cyclization reaction to yield 3-arylmethylene-3,4-dihydro-1H-quinolin-2-ones from compounds obtained from the S_N2 reaction between anilines and acetyl derivatives of Baylis-Hillman adducts of acrylates in the presence of DABCO. In contrast, similar compounds obtained from the acetyl derivatives of Baylis-Hillman adduct of acrylonitrile on treatment with trifluoroacetic acid directly furnish 3-arylmethyl-2-amino-quinoline via tandem Claisen rearrangement, cyclization and isomerization.     

Studies of solvent effects

The effect of water on the conformational preferences of acetylcholine has been studied within the discrete, the continuum and the combined discrete-continuum models described in parts I and II of this series. All the models lead to the conclusion that the trans-gauche form which is, following refined quantum-mechanical computations, the intrinsically preferred one and the one observed in the crystal of acetylcholine and of a number of analogues should remain also the preferred conformation in water. This result agrees with NMR studies. The results of the empirical discrete model used here compare favorably to those obtained by an ab initio super-molecule treatment. The continuum model utilized here represents a net improvement above such models utilized in other works.     

Engineering cytochrome P-450s

Cytochrome P-450 isozymes represent a critical component of nature’s spectrum of detoxification catalysts that could be exploited for bioremediation. The ethanol-inducible human cytochrome P-450 2E1 serves as a model eukaryotic P-450 that complements the bacterial P-450 cam in dehalogenation and detoxification of environmental pollutants. We explored the construction of novel chimeric P-450s using cytochrome P-450 camC and 2E1 genes. For construction of chimera 1 (478 amino acids, 55.14 kDa), 145 amino acids from the N-terminus of P-450 2E1 protein (493 amino acids, 56.84 kDa) were replaced with 130 amino acids from the N-terminus of P-450 camC protein (415 amino acids, 46.66 kDa). In chimera 2 (525 amino acids, 60.24 kDa) the strategy involves replacement of 28 amino acids in the C-terminus of chimera 1 with 75 amino acids from the C-terminus of P-450 camC gene. Homology models of both the chimeric proteins were developed using SWISS-MODEL based on the known crystal structure of cytochrome P-450 camC, BM-3, 1DT6A, and 2C17A. The models indicated that the proposed heme-binding site was intact, which is inevitable for catalytic activity of cytochrome P-450s. The expression of chimera 1 and 2 genes in Escherichia coli DH5α was evident from light-pink cell pellets, protein band in sodium dodecyl sulfate polyacrylamide gel electrophoresis, and diagnostic carbon monoxide-difference spectra. Our studies show that strategies can be developed to exploit the natural diversity of the P-450 superfamily to generate chimeric biocatalysts that would provide new templates amenable to directed evolution.     

Synthesis ofS-(+)-hydroprene

A novel path toS-(+)-hydroprene (1) starting from the technical gradeS-(+)-dihydromyrcene (2, e.e. 50%) is proposed. The latter was selectively transformed intoS-3,7-dimethyloctanal (5) in three steps including hydroalumination. The reactions of5 with allyl- or methallylmagnesium chloride followed, respectively, either by oxygenation in the presence of PdCl₂/CuCl or by ozonolysis, affordS,E-6,10-dimethyl-3-undecen-2-one (7) which was treated with ethoxyethynylmagnesium bromide to give the title juvenile hormone analogue in 23% overall yield.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No 1, pp. 110–112, January, 1993.     

Recent Applications of α-Metalated Isocyanides in Organic Synthesis

Being both nucleophilic and electrophilic, α-metalated isocyanides can add to polar double bonds, forming heterocycles. They are also synthons for α-metalated primary amines. This article describes recent or improved procedures for their use in organic synthesis: (1) In heterocyclic syntheses to give 2-oxazolines, 2-imidazolines, 2-thiazolines, oxazoles and oligooxazoles, thiazoles, triazoles, imidazolinones, pyrroles, 5,6-dihydro-1,3-oxazines and -thiazines, and (via cycloaddition with nitrones) 2-imidazolidinones. (2) In the field of formylaminomethylenation, for example transformation of estrone methyl ether and a keto sugar into the corresponding α-formylaminoacrylic esters, and the conversion of aldehydes and ketones by 3- and 4-pyridyl-methyl isocyanides into N-(1-pyridyl-1-alkenyl)formamides and their hydrolysis to 3- and 4-acylpyridines. (3) In connection with the use of α-metalated isocyanides as synthons for α-metalated primary amines, the author demonstrates how they may be used for preparation of 1,2- and 1,3-amino alcohols, 1,2-diamines, 2,3-diaminoalkanoic acids and for synthesis of higher amino acids starting from simple amino acids.     

Synthesis of stable azomethine ylides by the rearrangement of 1,3-dipolar cycloadducts of 3,4-dihydroisoquinoline-2-oxides with DMAD

1-Aryl-6,7-dimethoxy-1,2,3,4-tetrahydroisoquinolines were prepared according to a one-pot procedure involving the reaction of 2-(3,4-dimethoxyphenyl)-ethylamine with aromatic aldehydes in TFA at reflux. The tetrahydroisoquinolines were treated with H₂O₂-WO₄²⁻ in methanol at room temperature to give the corresponding 3,4-dihydroisoquinoline-2-oxides. Treatment of these cyclic nitrones with DMAD in toluene at room temperature gave the corresponding isoxazolo[3,2-a]isoquinolines. These compounds were heated in toluene at reflux to give the corresponding ylides in high yields (Method A). The effect of the substituents on the rate of the rearrangement of such compounds prompted us to discuss a new mechanism involving consecutive C-C bond heterolysis and 1,3-sigmatropic shift. A one-pot reaction involving the treatment of the nitrones with equimolar amounts of DMAD in refluxing toluene also gave the ylides (Method B). The structures of the prepared compounds were elucidated by spectral means and elemental analyses.     

Complexation of Ni (II) and Zn(II) ions by 3-(1-naphthyI)-2-mercaptopropenoic acid

The complexation equilibria between Ni(II) and Zn(II) metal ions with 3-(1-naphthyl)-2-mercaptopropenoic acid (H₂NMP) were studied by glass electrode potentiometry, at 25 °C and 1.0 mol·dm^–3 in NaClO₄ as constant ionic medium in 50% (v/v) water-ethanol solutions. Formation constants for the complexes Ni(NMP), Ni(NMP) ₂ ^2– , Zn(NMP) and Zn(NMP) ₂ ^2– , refined by the MINIGLASS program, are reported.