Fixed-bed adsorption of carbon dioxide/methane mixtures on silicalite pellets

The adsorption of carbon dioxide and methane on silicalite pellets packed on a fixed bed has been studied. Equilibrium and kinetic measurements of the adsorption of carbon dioxide and methane have been performed, and a binary adsorption isotherm for carbon dioxide/methane mixtures has been obtained. A model based on the LDF approximation for the mass transfer has been used to describe the breakthrough curves obtained experimentally. A PSA cycle has been proposed for obtaining methane with purity higher than 98% from carbon dioxide/methane mixtures containing 38% and 50% methane, and its performance has been simulated using the proposed model. The simulation results show that silicalite can be a suitable adsorbent for employment in a PSA separation process for carbon dioxide removal from coalseam and landfill gases.     

The Electrochemical Behavior of Keggin Polyoxometalate Modified by Tricyclic,Aromatic Entity

The inorganic‐organic hybrid polyoxometalates (POMs), (pbpy)₄H[PMo₁₂O₄₀(VO)] ( 1 ) and (pbpy)₄H₄[SiMo₁₂O₄₀] ( 2 ) (pbpy=5‐phenyl‐2‐(4‐pyridinyl)pyridine), have been synthesized and were, respectively, used as a solid bulkmodifier to fabricate a three‐dimensional bulk‐modified carbon paste electrode (CPE) by direct mixing. The electrochemical behavior and electrocatalysis of 1 and 2 modified CPE ( 1 ‐CPE and 2 ‐CPE) have been studied in detail. Both 1 ‐CPE and 2 ‐CPE show remarkable stability that can be ascribed to the doped organic conjugated pbpy, which is very important for practical applications in electrode modification.     

受限于纳米碳管中的乙醇分子的结构和扩散的分子模拟研究

利用分子模拟研究了常温常压下受限于(8,8) (管径1.081 nm)和(15,15) (管径 2.035 nm)单壁纳米碳管中的乙醇分子. 对受限分子的径向密度分布和氢键等静态性质以及扩散性质进行了分析. 结果显示在管内乙醇分子的平均氢键数目和主体相一致. 乙醇分子在(8,8)碳管内具有高度有序的结构, 而在(15,15)碳管内由于空间的增大导致结构有序度的降低, 其中分子取向已呈随机分布. 进一步对扩散系数的分析发现, 在管内乙醇分子的轴向扩散系数低于主体相, 特别在(8,8)碳管内乙醇分子几乎丧失了轴向扩散能力.     

Quinoprotein glucose dehydrogenase modified carbon paste electrode for the detection of phenolic compounds

The development of an amperometric biosensor for the determination of phenolic compounds is described, using quinoprotein glucose dehydrogenase. The enzyme is integrated into carbon paste and its ability to donate electrons to oxidized phenolic compounds during glucose oxidation is exploited. The sensor response is based on electrochemical oxidation of the phenolic compound followed by its enzymatic regeneration when the bulk solution contains glucose and the electrode is potentiostated at +500 mV (vs. Ag/AgCl/0.1 mol/L KCl). As the result of the catalytic analyte regeneration the electrodes offer very sensitive measurements of redox species like p-aminophenol and hydroquinone and catecholamines such as epinephrine, norepinephrine, and dopamine. The sensor performance is characterized for the different substrates. Highest sensitivity is achieved for p-aminophenol which could be determined at sub-nanomolar level.     

Nanowire‐Based Electrochemical Biosensors

We review recent advances in biosensors based on one‐dimensional (1‐D) nanostructure field‐effect transistors (FET). Specifically, we address the fabrication, functionalization, assembly/alignment and sensing applications of FET based on carbon nanotubes, silicon nanowires and conducting polymer nanowires. The advantages and disadvantages of various fabrication, functionalization, and assembling procedures of these nanosensors are reviewed and discussed. We evaluate how they have been used for detection of various biological molecules and how such devices have enabled the achievement of high sensitivity and selectivity with low detection limits. Finally, we conclude by highlighting some of the challenges researchers face in the 1‐D nanostructures research arena and also predict the direction toward which future research in this area might be directed.     

石墨烯的制备、功能化及在化学中的应用

石墨烯是最近发现的一种具有二维平面结构的碳纳米材料, 它的特殊单原子层结构使其具有许多独特的物理化学性质. 有关石墨烯的基础和应用研究已成为当前的前沿和热点课题之一. 本文仅就目前石墨烯的制备方法、功能化方法以及在化学领域中的应用作一综述, 重点阐述石墨烯应用于化学修饰电极、化学电源、催化剂和药物载体以及气体传感器等方面的研究进展, 并对石墨烯在相关领域的应用前景作了展望.     

Overwhelming electrochemical oxygen reduction reaction of zinc-nitrogen-carbon from biomass resource chitosan via a facile carbon bath method

Developing high efficiency and low cost electrocatalysts is critical for the enhancement of oxygen reduction reaction (ORR), which is the fundamental for the development and commercialization of renewable energy conversion technology. Herein, zinc-nitrogen-carbon (Zn-N-C) was prepared by using biomass resource chitosan via a facile carbon bath method. The obtained Zn-N-C delivered a high specific surface area (794.7 cm²/g) together with pore volume (0.49 cm³/g). During the electrochemical evaluation of oxygen reduction reaction (ORR), Zn-N-C displayed high activity for ORR with an onset potential E₀ = 0.96 V_RHE and a half wave potential E_1/2 = 0.86 V_RHE, which were more positive than those of the commercial 20 wt% Pt/C benchmark catalyst (E₀ = 0.96 V_RHE and E_1/2 = 0.81 V_RHE). In addition, the Zn-N-C catalyst also had a better stability and methanol tolerance than those of the Pt/C catalyst.     

Effects of pretreatments and modifiers on electrochemical properties of carbon paste electrodes

The electrochemical properties of carbon paste electrodes (CPEs), including unmodified and modified with protein and polycations, were investigated by impedance spectroscopy (IS) using ferricyanide and ferrocene monocarboxylic acid (FcMA) as redox probes. Various electrochemical pretreatments were applied to the unmodified CPE. The heterogeneous charge transfer rate constant of ferro/ferricyanide couple is enhanced by 2 to 10 times compared with that obtained at untreated electrodes. It was found that for ferricyanide the more suitable pretreatments are successive cyclic voltammetric scans, cathodization and a square wave-like stepping rather than high-potential anodization. However, the pretreatment only exhibits a slight effect on the kinetics of FcMA. At the CPEs containing modifier, the electron transfer rate of the redox couple depends more on the pH of electrolyte solution if ferro/ferricyanide is used. The results can be explained by the differently charged states of the CPEs that were caused by the protonation or deprotonation of the modifiers in various pH solutions and demonstrate the importance of the electrostatic interaction on the kinetics of the highly polar species such as ferricyanide. The different adsorptive behavior of ferricyanide and FcMA is also discussed.     

CO2氧化丙烷脱氢MoO3-V2O5/SiO2催化剂研究

采用表面改性和等体积浸渍法制备了MoO3-V2O5／SiO2复合氧化物，采用TPR、IR、TPD和微反技术表征了催化剂对CO2和C3H8的吸附性能和CO2部分氧化丙烷脱氢的反应性能．结果表明：随MoO3加入量的增加，V=O还原温度降低，晶格氧更易活化．CO2和丙烷的活化温度降低，丙烷转化率增高，丙烯选择性下降．V=O中晶格氧的活化是CO2氧化丙烷制丙烯反应的关键．     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.