掺杂对碳纳米管拉曼光谱及场发射性能的影响

采用高温热解法在860℃分别制备出了镓、氮以及硼和氮掺杂的碳纳米管,提纯后利用丝网印刷工艺分别将它们制备成薄膜,并测试了它们的拉曼光谱与场发射性能。测试结果表明,掺杂纳米管的缺陷密集度比纯碳纳米管明显增大,而它们的场致电子发射性能则与掺杂元素的性质密切相关。镓和氮掺杂的纳米管均具有非常优异的场发射性能,而硼和氮共掺杂的纳米管的场发射性能很差。掺杂引起碳纳米管费米能级附近能态密度的变化及功函数的降低是其具有优异场致电子发射性能的主要原因。     

纳米碳管复合凝胶玻璃结构及谱学性能研究

用物理掺杂工艺将纳米碳管引入二氧化硅凝胶玻璃基质,成功制备了纳米碳管复合凝胶玻璃,采用X射线衍射、透射电子显微镜、紫外-可见吸收光谱、红外光谱、拉曼光谱等测试方法对其结构和谱学性能进行了表征。结果表明,通过优化掺杂工艺能够实现纳米碳管与基质的均匀复合,纳米碳管本身的结构在掺杂过程中并未发生改变。纳米碳管的引入对二氧化硅凝胶玻璃基质的紫外-可见吸收光谱和红外光谱未产生显著影响。     

Adsorption CO2 on the perfect and oxygen vacancy defect surfaces of anatase TiO2 and its photocatalytic mechanism of conversion to CO

The adsorption energies for physisorption and the most stable chemisorption of CO₂ on the neutral charge of perfect anatase [TiO₂] (0 0 1) are −9.03 and −24.66 kcal/mol on the spin-unpolarized and −12.98 and −26.19 kcal/mol on the spin-polarized surface. The small activation barriers of 1.67 kcal/mol on the spin-unpolarized surface and of 6.66 kcal/mol on the spin-unpolarized surface were obtained. The adsorption mechanism of CO₂ on the oxygen vacancy defect [TiO₂ + V_O] surface of anatase TiO₂ using density functional theory calculations was investigated. The energetically preferred conversion of CO₂ to CO was found either on the spin-unpolarized or spin-polarized surfaces of oxygen vacancy defect surface [TiO₂ + V_O] as photocatalyst.     

Field emission characteristics of screen-printed carbon nanotubes cold cathode by hydrogen plasma treatment

Selective plasma etching and hydrogen plasma treatment were introduced in turn to improve field emission characteristics of screen-printed carbon nanotubes (CNTs) cold cathode, which was prepared by using slurry of mixture of multi-wall CNTs, organic vehicles and inorganic binder, i.e. silicon dioxide sol. The results show that selective plasma etching process could effectively remove parts of surface inorganic vehicle (SiO₂) layer and expose more smooth and clean CNTs on cathode surface, which could significantly decrease the operating field of CNTs cathode. There are some nanoparticles emerging on the out of CNTs wall after hydrogen plasma treatment, which are equivalent to increase field emission point of cathode. At the same time, these nanoparticles can increase the local electric field of CNTs, which can decrease operating voltage of CNTs cathode and improve uniformity field emission.     

Influence of DC electric field on the Lennard-Jones potential and phonon vibrations of carbon nanotube on catalyst

Influence of DC electric field on carbon nanotube (CNT) growth in chemical vapor deposition is studied. Investigation of electric field effect in van der Waals interaction shows that increase in DC electric field raises the magnitude of attractive term of the Lennard-Jones potential. By using a theoretical model based on phonon vibrations of CNT on catalyst, it is shown that there is an optimum field for growth. Also it is observed that CNT under optimum electric field is longer than CNT in the absence of field. Finally, the relation between optimum DC electric field and type of catalyst is investigated and for some intervals of electric field, the best catalyst is introduced, which is very useful for experimental researches.     

Wild Rabbit Host and Some Parasites Show Trophic-Level Relationships for δ13C and δ15N: A First Report

Abstract

We report the first isotopic study of an animal host-parasite system. Parasitic, intestinal nematodes, Graphidium strigosum and Passalurus ambiguus, were ¹⁵N-enriched relative to their host, the European rabbit Oryctolagus cuniculus, while parasitic cestodes, Cittataenia denticulata and Mosgovoyia pectinata, were ¹⁵N-depleted, suggesting different trophic relationships. Host embryos were more similar in their δ¹³C and δ¹⁵N values to maternal muscle than were any of the parasites. Coprophagy, the direct recycling of food by the rabbit eating its own faeces, did not lead to isotopic differences between stomach contents and faeces, suggesting that the major point for isotopic discrimination in lagomorph nitrogen metabolism is in the animal rather than in the gut. We conclude that bulk δ¹³C and δ¹⁵N can reveal valuable new information about host-parasite relationships, and these could be explored further at the biochemical level using compound-specific isotopic analyses.     

Early transient responses of multi-span stepped single-walled carbon nanotubes using the method of reverberation ray matrix

The early transient responses of multi-span stepped single walled carbon nanotubes (SWCNTs) under impact loadings are studied by the method of reverberation ray matrix (MRRM). The dynamics model of the carbon nanotubes is established in the Fourier phase space on the basis of the nonlocal Timoshenko beam model. The wave solutions of SWCNTs with arbitrary boundary conditions are obtained by the wave method. The reverberation ray matrix of the multi-span stepped SWCNTs is the product of scattering, phase and permutation matrices, which can be determined by the impact loadings, continuous conditions and boundary conditions. The early transient responses can be calculated by the inverse Fourier transform of the sum of initial ray groups. It can be found that the early transient displacement response in the very short time subjected to the impact loading is very small, while the transient transverse shear strain becomes large in the very short time. The influences of nanotubes span number, nanotubes type and boundary conditions on the early transient responses of multi-span stepped SWCNTs are investigated.     

Radical grafting from carbon fiber surface: graft polymerization of vinyl monomers initiated by azo groups introduced onto the surface

This paper describes the radical graft polymerizations of vinyl monomers from carbon fiber surface initiated by azo groups introduced onto the fiber surface. The carbon fiber used in this experiment was the polyacrylonitrile type. The introduction of azo groups onto the carbon fiber surface was achieved by the reaction of 4,4'-azobis (4-cyanopentanoic acid) with isocyanate groups which were previously attached onto the surface by the treatment of the fiber with tolylene 2,4-diisocyanate. The amount of surface azo groups introduced onto nitric acid-treated carbon fiber was determined to be 0.60 x 10^-5 mol 9^-1 by nitrogen analysis. The radical graft polymerization of methyl methacrylate (MMA) was tried. Though the thermal polymerization of MMA proceeded slightly in the absence or in the presence of untreated carbon fiber, the rate of the polymerization was considerably low. In contrast, the graft polymerization of MMA was initiated in the presence of the carbon fiber having surface azo groups, and part of resultant poly(MMA) grafted onto the surface. The percentage of grafting increased with an increase in polymerization time and reached 42.8% after 24 h. The graft polymerizations of other monomers, such as styrene, vinyl acetate, and acrylic acid, were also initiated by the surface azo groups attached onto the carbon fiber, and the corresponding polymer effectively grafted onto the surface.     

Dynamic mechanical characterization of PMR polyimide/carbon fiber composites modified by fiber coating with silicones

Viscous and elastomeric silicones have been applied as interlayers to carbon fibers in order to develop a tougher, micro-crack resistant, thermally stable polyimide (PMR-15) composite. Carbon fiber is continuously coated with very high molecular weight polydimethylsiloxane (PDMS) and polyvinyl-methylsiloxane (PVMS). Dynamic mechanical properties of the composites have been determined and compared with uncoated carbon fiber reinforced PMR-15 polyimide composites. The presence of the interlayer is shown by the appearance of a new relaxation peak. The peak temperature is found to be a good indication of the degree of the cure of the silicone elastomer. Comparison of the storage moduli of uncoated and coated carbon fiber composites at the service temperature range of the composites indicates that the presence of the silicone interlayer affects the shear moduli of the composites. Apparent activation energy of the α transition of the matrix in the modified composites varies with the amount of interlayer and composition in concert with the impact strength.     

CH_4/N_2混合气体在CMS上的低温吸附分离实验研究

将煤层气液化后运往终端市场是一种十分有效的利用方式。与常规天然气不同,抽放煤层气含氮量高,采用有效的方式实现CH4/N2分离是煤层气液化流程中重要的环节。吸附分离是提高煤层气中甲烷浓度的可行方法。为了与低温液化过程紧密结合,探讨在低温下实现CH4/N2吸附分离的可行性,文中对CH4/N2在碳分子筛(CMS)上的低温分离特性进行了实验研究,并与常温下的实验结果进行了对比。实验结果表明,低温下CH4/N2吸附分离的特性与常温下有明显差别。