Anisotropy of the spatial distribution of CO molecules desorbing from tungsten

The desorption of CO from an anisotropic surface of polycrystalline tungsten after different periods of annealing has been studied. Anisotropy in the spatial distribution of CO molecules in the desorbing flux was detected at early stages of annealing. Smoothing out of the surface texture during annealing recorded by means of STM resulted in the disappearance of the spatial distribution anisotropy. The results are quantitatively explained by the model of a rough surface.⁷ Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 999–1002, June, 1994.The authors express their profound gratitude to Prof. V. I. Panov and his collaborators for making it possible to carry out measurements with a tunneling microscope and for their help.     

Catalytic oxidation of CO,hydrocarbons, and ethyl acetate over perovskite-type complex oxides

The catalytic activity of M^IM^IIO₃] perovskite-type complex oxides (M^I = La, Y, Nd, Yb; M^II = Co, Mn, Ni) in the oxidation of CO, propylene, benzene, ethylbenzene,o-xylene, and ethyl acetate was investigated. The Co-containing catalysts were shown to be more active in the oxidation than the Mn-containing catalysts. A relationship between the catalytic and adsorption properties was established.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 602–605, April, 1994.     

Metal carbonyl catalysis of carbon monoxide and formate reactions

The water gas shift reaction (CO + H₂O = CO₂+ H₂) is catalyzed by aqueous metal carbonyl systems derived from simple mononuclear carbonyls such as Fe(CO)₅ and M(CO)₆ (M = Cr, Mo, and W) and bases in the 140–200 °C temperature range. The water gas shift reaction in a basic methanol-water solution containing Fe(CO)₅ is first order in [Fe(CO)₅], zero order in [CO], and essentially independent of base concentration and appears to involve an associative mechanism with a metallocarboxylate intermediate [(CO)₄Fe-CO₂H]^–. The water gas shift reactions using M(CO)₆ as catalyst precursors are first order in [M(CO)₆], inverse first order in [CO], and first order in [HCO₂ ^–] and appear to involve a dissociative mechanism with formatometallate intermediates [(CO)₅M-OCHO]^–.The Reppe hydroformylation of ethylene to produce propionaldehyde and 1-propanol in basic solutions containing Fe(CO)₅ occurs at 110–140 °C. This reaction is second order in [Fe(CO)₅], first order in [C₂H₄] up to a saturation pressure >1.5 MPa, and inhibited by [CO]. These experimental results suggest a mechanism where the rate-determining step involves a binuclear iron carbonyl intermediate. The substitution of Et₃N for NaOH as the base facilitates the reduction of propionaldehyde to 1-propanol but results in a slower rate for the overall reaction.The homogeneous photocatalytic decomposition of the formate ion to H₂ and CO₂ in the presence of Cr(CO)₆ appears to be closely related to the water gas shift reaction. The rate of H₂ production from the formate ion exhibits saturation kinetics in the formate ion and is inhibited by added pyridine. The infrared spectra of the catalyst solutions indicate an LCr(CO)₅ intermediate. Photolysis of the Cr(CO)₆/formate system in aqueous methanol in the presence of an aldehyde RCHO (R =n-heptyl,p-tolyl, andp-anisyl) results in catalytic hydrogenation of the aldehyde to the corresponding alcohol RCH₂OH by the formate ion. Detailed kinetic studies onp-tolualdehyde hydrogenation by this method indicates saturation kinetics in formate ion, autoinhibition by thep-tolualdehyde, and a threshold effect for Cr(CO)₆ at concentrations >0.004 mol L^–1. The presence of an aldehyde can interrupt the water gas shift catalytic cycle by interception of an HCr(CO)₅ ^– intermediate by the aldehyde.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1533–1539, September, 1994.     

Catalytic properties of spinel-type complex oxides in oxidation reactions

The catalytic activity of M^IM^II ₂O₃ spinel-type complex oxides (M^I = Cu, Ni, Mn, Zn, Mg, Co, M^II = Co, Cr, Al) in the oxidation of CO and ethylbenzene has been investigated. The Co-containing catalysts were more active than the Cr- and Al-containing catalysts. The nature of the cation influenced the catalytic activity. Higher activities were observed for the catalysts containing two transition elements. A correlation between the catalytic and adsorption properties was established.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1730–1732, October, 1994.     

Carbon–epoxy composites based on fibers coated with nylon 6,6: hygrothermal ageing versus interlaminar shear strength

Carbon fibers were coated in situ with a thin film of polyhexamethylene adipamide by an interfacial polycondensation technique. The modified fibers were used for the preparation of epoxy-based unidirectional composites. Specimens of these materials were immersed in water until equilibrium conditions were attained. The weight gain at equilibrium was determined as a function of the immersion temperature, the fiber volume fraction and the polyamide content deposited on the fibers. Water penetration in specimens made with uncoated carbon fibers increases when the volume fraction decreases. Introduction of the polyamide interlayer initially increases the water absorption, but reduces it at higher immersion temperatures and/or higher polyamide contents. The treated specimens were subjected to the short beam test to determine the interlaminar shear strength (ILSS). The data show that the ILSS decreases with water penetration but increases when the immersion temperature increases from 40 to 70°C. The overall performance encountered is discussed in terms of the possible roles of the polyamide interphase while taking into account mechanisms concerned with matrix plasticization, interphase degradation and residual stress relaxation.     

Synthesis of poly (ether-sulfone-amide)s by palladium-catalyzed polycondensation of aromatic dibromides containing ether sulfone structure,aromatic diamines,and carbon monoxide

A general method for the preparation of aromatic poly (ether-sulfone-amide)s has been developed. Polymerization is based on the palladium-catalyzed polycondensation of aromatic dibromides containing ether sulfone structural units, aromatic diamines, and carbon monoxide. Reactions were carried out in N, N-dimethylacetamide (DMAc) in the presence of palladium catalyst, triphenylphosphine, and 1,8-diazabicyclo [5,4,0]–7–undecene (DBU), and gave a series of poly (ether-sulfone-amide)s with inherent viscosities up to 0.86 dL/g under mild conditions. The polymers were quite soluble in strong acids, dipolar aprotic solvents, and pyridine. Thermogravimetry of the polymers showed excellent thermal stability, indicating that 10% weight losses of the polymers were observed in the range above 470°C in air. The glass transition temperatures of the polymers were around 230°C, which are higher than those of poly (ether-sulfone) analogues. These polymers also showed the good tensile strengths and tensile modulus. © 1994 John Wiley & Sons, Inc.     

蒙脱石修饰碳糊电极测定氨基酸的研究：Ⅱ.酪氨酸的测定

本文报道蒙脱石修饰碳糊电极测定酪氨酸，在０．００１ｍｏｌ／Ｌ ＫＣｌ－ＨＣｌ（ｐＨ＝２．０）溶液中开路富集，介质交换后微分脉冲阳极溶出伏安法测定，在０．５－２．５μｇ／ｍｌ范围内有线性，检测限为６３ｎｇ／ｍｌ。可避免其他氨基酸，微量元素和常量金属元素的干扰，直接用于氨基酸药物样品的分析，获得了满意的结果，还对酪氨酸在电极上的反应机理进行了探讨。     

石墨烯的制备、功能化及在化学中的应用

石墨烯是最近发现的一种具有二维平面结构的碳纳米材料, 它的特殊单原子层结构使其具有许多独特的物理化学性质. 有关石墨烯的基础和应用研究已成为当前的前沿和热点课题之一. 本文仅就目前石墨烯的制备方法、功能化方法以及在化学领域中的应用作一综述, 重点阐述石墨烯应用于化学修饰电极、化学电源、催化剂和药物载体以及气体传感器等方面的研究进展, 并对石墨烯在相关领域的应用前景作了展望.     

Sensitive electrochemical detection of arsenic (III) using gold nanoparticle modified carbon nanotubes via anodic stripping voltammetry

Gold nanoparticles were deposited electrolessly on multiwalled carbon nanotubes (CNTs) via in situ reduction of HAuCl₄ by NaBH₄. The resulting gold covered nanotubes were immobilised onto the surface of a glassy carbon electrode via evaporation of a suspension in chloroform. Anodic stripping voltammetry was performed with the modified electrode in As(III) solutions. A limit of detection (LOD based on 3σ) of 0.1 μg L⁻¹ was obtained but more importantly a sensitivity of 1985 μA μM⁻¹ was obtained with square wave voltammetry (SWV) in an optimised system with a deposition time of 120 s. These values, particularly the high sensitivity compare favourably with previously reported methods in the area of electrochemical arsenic detection.     

固态氢分子基质隔离高分辨光谱实验装置及其应用

建立了用傅立叶变换红外光谱和中红外差频激光光谱方法研究氢基质隔离光谱的测量装置. 作为装置的测试, 观测了3 cm长的固态氢分子晶体在1-5 μm波段的吸收光谱. 并用中红外差频激光测量其在2410 cm-1附近的W0(0)(v=0→0, J=6→0)谱线的高分辨精细结构. 通过在低温基片上喷溅沉积氢分子晶体薄膜的方法, 对氢基质隔离的CO2分子的高分辨红外吸收光谱进行了研究.