About graphene ribbons development in laser synthesized nanocarbon

The work presents preliminary studies with the goal to extend the share of long graphene ribbons in laser-synthesized carbon black. Investigations revealed the existence, as a major constituent, of graphene ribbons composed of up to 10-15 graphene layers, spaced at ∼0.35-0.37 nm and of tens of nanometres in length. The samples used to study the development of this specific structure were obtained from sensitized acetylene-based mixtures and the experiments were performed following the variation of both the experimental parameters and gas composition.     

粉末活性炭对模拟间苯二酚废水的吸附

在静态条件下,研究了粉末活性炭对间苯二酚废水的吸附效果,通过实验优化了吸附条件,并在最佳处理效果下探究其吸附模式。结果表明,当水样pH值为4,温度30℃,活性炭用量0.3g,振荡时间10m in,振荡速率为120r/m in时,对废水的处理效果最佳。拟合得到活性炭吸附间苯二酚的模式符合F reund lich吸附模式。     

活性炭负载硅钼钒杂多酸催化苯羟基化反应

以活性炭为载体,采用回流吸附法制备了负载型硅钼钒杂多酸催化剂,以冰醋酸作溶剂,过氧化氢作氧化剂,研究了由苯直接羟基化制苯酚的催化活性。结果表明,苯为2mL,冰醋酸为15mL,过氧化氢为5mL,当负载型杂多酸的用量为0.2g、反应温度70℃、反应时间60m in时,硅钼钒催化合成苯酚的收率可达7.4%,选择性达97.1%。     

High sensitivity cavity ring down spectroscopy of CO2 overtone bands near 790 nm

The dyad bands of near 790 nm have been recorded with a continuous-wave cavity ring-down spectrometer. Two cold bands and the two associated hot bands are observed in this region. High sensitivity of the 1×10⁻¹⁰/cm level allows one to detect weak transitions with satisfied accuracy. The absolute line intensities have also been retrieved with an estimated accuracy of 2% for majority of the unblended lines. The vibrational transition dipole moment squared values and the empirical Herman-Wallis coefficients are presented for two cold bands. The comparison of the retrieved line positions and intensities with those given in the Carbon Dioxide Spectroscopic Databank shows clear deviation and indicates the empirical calculation can be further improved using the present spectroscopy data.     

Thermomechanical behavior of SBR reinforced with nanotubes functionalized with polyvinylpyridine

The mechanical and thermal behavior of composites consisting on a styrene–butadiene rubber (SBR) matrix with a sulphur/accelerator system and multiwalled carbon nanotubes functionalized with poly-4-vinylpyridine (MWCNT-PVP) as reinforcement, were studied. The materials were tested with stress-strain tensile tests, DMTA and DSC for thermal properties. A strong increase in the plastic behavior with slight decrease of its elastic Modulus and Tg led to unexpected results.     

First-principles study of electronic and elastic properties of Stone–Wales defective zigzag carbon nanotubes

The interaction and coupling between the electrical, mechanical properties and formation energy for SW defective (10,0) carbon nanotube is studied in density functional theory. The investigated configurations include the axial and circumferential orientations for single defect as well as four distribution types for double ones. The more stable defective configurations, namely, SW-I configurations for single SW defective carbon nanotube and II–II-(2) and I–I ones for double SW defective tubes are related to high symmetry distribution of the defects. Moreover, we found that the σ^?–π^* hybridization induced by curvature effect causes the semiconductor to metal transition for double axial SW defects case. Young's modulus reduction of SW defective carbon nanotube with respect to defect-free one is less than 8%. The energy bands and Young's moduli of double SW defective tubes are mostly affected by the defect distribution and concentration but insensitive to the circumferential distance between the double defects.     

Directional crystallization and self-assembling initiated by mechanical shock or electron beam in nanocrystalline Co-C and Fe-C films

We investigated iron and cobalt films with 20% carbon concentration with nanocrystalline structure. One of the aims of this work is to analyze the physical nature of high-speed structural self-assembling as often happens in explosive crystallization processes in these films.     

Metallic nanoparticles on plasma treated carbon nanotubes: Nanohybrids

Multi-wall carbon nanotubes (MWCNTs) were decorated with metal clusters by thermal evaporation. Transmission electron microscopy (TEM) shows that the nature and extent of metal coverage can be varied by plasma treating the MWCNT surface. The metal clusters on oxygen plasma treated arc-discharge MWCNTs have a more dense distribution than the clusters evaporated on as-synthesized arc-discharge MWCNTs. In contrast, the plasma treatment did not affect the cluster distribution on CVD MWCNTs. Analyses of the valence band and the core levels by X-ray photoelectron spectroscopy suggest poor charge transfer between gold clusters and MWCNTs; on the contrary suggest good charge transfer between Ni clusters and MWCNTs.     

Thermal and photochemical reactivity of oxygen atoms on gold nanocluster surfaces

Reduction of oxidized gold nanoclusters by exposures to foreign gases and irradiation of UV photons has been investigated using X-ray photoelectron spectroscopy. Gold nanoclusters with narrow size distributions protected by alkanethiolate ligands were deposited on a TiO₂(1 1 0) surface with dip coating. Oxygen plasma etching was used for removal of alkanethiolate ligands and oxidization of gold clusters. The oxidized gold clusters were exposed to CO, C₂H₂, C₂H₄, H₂, and hydrogen atoms. Although, C₂H₄ and H₂ did not show any indications of reduction of oxidized gold clusters, CO, C₂H₂, and hydrogen atoms reduced the oxides on gold cluster surfaces. Among them, hydrogen atoms were most effective for reduction. Irradiation of UV photons around 400 nm could also reduce the oxidized gold clusters. The photochemical reduction mechanism was proposed as follows. The photo-reduction was initiated by electronic excitation of gold clusters and oxygen atoms activated reacted with carbon atoms at the surfaces of gold clusters. Carbon species were likely absorbed in gold clusters or remained at the boundaries between gold clusters when gold clusters agglomerated during oxygen plasma exposures. As the photochemical reduction progressed, carbon atoms segregated to the surfaces of gold clusters.     

CO adsorption on epitaxially grown Pt layers on Ru(0 0 0 1)

The adsorption of CO on epitaxially grown Pt films of variable thickness has been studied using infrared-absorption spectroscopy, scanning tunnelling microscopy and thermal desorption spectroscopy. Depending on the number of pseudomorphic Pt layers (N_Pt = 1-4) the internal and external CO stretching modes (ν_C-O and ν_Pt-CO, respectively) display characteristic frequency shifts due to the vanishing influence of the underlying Ru(0 0 0 1) substrate and Pt/Ru interface. For thicker layers (N_Pt ? 5) when this influence has become negligible, the compressive stress within the Pt film is gradually relieved, leading to a dislocation network. The structural heterogeneity during the ongoing relaxation process of the Pt film is reflected in the ν_C-O line shape; no line broadening is observed for either pseudomorphic or very thick films (N_Pt ? 15). For N_Pt ? 3 the adsorption of CO on Pt/Ru(0 0 0 1) films closely resembles CO on Pt(1 1 1), with residual deviations in line position and desorption temperatures gradually converging to zero.