基于混酸回流制备碳点的中和过程

Carbon dots (C dots) are relatively novel carbon nanomaterials that have attracted significant interest due to their unique photoluminescence, good biocompatibility, and stability. The preparation methods of C dots was usually summarized into "top-down" and "bottom-up", and mixed acid reflux is a top-down strategy that can be used to synthesize C dots, during which neutralization is a necessary step that can significantly influence the properties and potential applications of the final product. Previously, this research area mainly focused on tuning the properties of C dots by changing the starting materials and/or varying the reaction conditions; the influence of the reagents used during neutralization has been largely ignored. As the previously reported C dots prepared by mixed acid reflux were obtained from different starting materials under varied conditions, a meaningful comparison is difficult. Herein, yellow-emitting C dots were prepared by mixed acid-refluxing a carbon-rich material derived from fullerene carbon soot. For the same batch of as-prepared C dots, the influences of four reagents, i.e., NaOH, Na₂CO₃, K₂CO₃, and NH₃·H₂O, during neutralization on the structures and photoluminescence of the resulting C dots were investigated in detail. The results of thermogravimetric analysis, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy clearly showed that the reagent used during neutralization can affect the degree of dissociation of the acidic functional groups on the C dots. This is further supported by examination of the C dot/surfactant mixtures where subtle changes in the phase behavior were observed. Structural changes of the C dots cause variations in their surface states, ultimately altering the optical characteristics, including UV-vis absorption and fluorescence. Among the treated C dots, the sample prepared with Na₂CO₃ showed the strongest emission under the same excitation wavelength, while that prepared with NH₃·H₂O exhibited a distinct red shift (~8 nm) in the emission curve. The results presented herein provide clear evidence that neutralization reagent selection is important for optimizing the properties of the resulting C dots obtained by mixed acid reflux. In addition, the photoluminescence of the C dots can be influenced by their counterions, providing a novel method for tuning the properties of C dots while explaining their behavior in saline solutions. In short, the basicity of the neutralizing reagent and the type of counterions affect the structure of the C dots surface, which brings different performances. This work reminds researchers that it is necessary to use the type of neutralizing reagent as an experimental condition when preparing C dots in the future.     

碳纤维微电极负载金纳米粒子用于绿茶中儿茶素的检测

本文开发了基于纳米金修饰的碳纤维超微电极(CFME)用于儿茶素的定量检测。通过使用柠檬酸三钠还原氯金酸制得纳米金粒子(AuNPs),采用恒电位电沉积法将纳米金修饰在CFME表面。在pH 2.00的Tris-HCl缓冲溶液中,采用差分脉冲法和循环伏安法考察了修饰前后电极对儿茶素的电催化性能。结果表明,纳米金修饰电极对儿茶素具有明显的电催化效果。在优化实验条件下,纳米金修饰的碳纤维超微电极(AuNPs/CFME)与儿茶素浓度在1.00×10^-3~10.0μmol/L范围内呈良好的线性关系,且AuNPs/CFME的电化学性能非常稳定,具有良好的重现性。该方法操作简单,准确性高,可用于对儿茶素进行定量检测。     

电感耦合等离子体发射光谱法测定粗二氧化碲中 铜、铅、锑、铋、砷和硒

粗二氧化碲作为碲精炼或碲化工产品生产的重要原料,其中共存元素铜、铅、砷、锑、铋、硒含量的准确测定对于生产过程质量控制和贸易结算具有重要意义,但目前没有粗二氧化碲中铜、铅、砷、锑、铋、硒含量检测的标准分析方法。采用王水和饱和氟化氢铵分解试样,在王水和酒石酸介质中,选用Cu 327.393 nm、Pb 220.353 nm、Sb 217.582 nm、Bi 223.061 nm、As 193.696 nm、Se 196.026 nm为分析谱线,采用电感耦合等离子体发射光谱(ICP-AES)法测定粗二氧化碲中铜、铅、锑、铋、砷和硒含量。各元素校准曲线的相关系数均大于0.999;铜、铅、锑、铋、砷和硒的检出限分别为0.0004%、0.0005%、0.0006%、0.0007%、0.0004%和0.0007%,定量检出限分别为0.0012%、0.0016%、0.0020%、0.0025%、0.0013%和0.0025%。按照实验方法测定5个粗二氧化碲样品中铜、铅、锑、铋、砷和硒,测定结果的相对标准偏差(RSD,n=7)为0.79%~4.8%,加标回收率为96.0%~103%。方法简单,精密度和准确度较高,可用于测定粗二氧化碲中铜、铅、砷、锑、铋、硒含量。     

基于半刚性配体的柔性超微孔金属有机骨架的合成及其尺度选择性二氧化碳捕获

基于半刚性的配体3′,5′-di(1H-1,2,4-triazol-1-yl)-(1,1′-biphenyl)-3,5-dicarboxylic acid (H₂DTBDA)和硝酸钴制备了一个柔性超微孔的金属有机骨架{[Co(DTBDA)]·4H₂O}_n (FJI-H35),并对该材料的结构进行了系统的表征。FJI-H35活化以后可以发生自适应的结构转变,使得孔径从0.43 nm收缩到0.37 nm。气体吸附测试表明FJI-H35可以从氮气和甲烷中选择性捕获二氧化碳,具有很高的吸附选择性和相对低的吸附焓。突破实验进一步证实FJI-H35可以从二氧化碳/氮气(15∶85,V/V)和二氧化碳/甲烷(50∶50,V/V)混合气中高效选择性捕获二氧化碳。     

金属-有机骨架衍生催化剂在二氧化碳加氢和费托合成反应中的应用

CO₂加氢和费托合成反应是C1化学中重要的研究领域,CO₂加氢制备高附加值化学品和燃料有助于降低大气中CO₂浓度,减轻化石燃料消耗的压力;费托合成反应是以非石油资源为原料生产液体燃料和化学品的重要路径。 开发新型、高效、稳定的催化剂是CO₂加氢和费托合成反应的关键点之一。 利用金属-有机骨架(Metal-Organic Frameworks,MOFs)材料的特点制备的MOFs衍生催化剂在CO₂加氢和费托合成反应中具有较好的应用前景。 本文综述了CO₂加氢和费托合成反应中MOFs衍生催化剂的制备方法,以及催化剂在各反应中的催化性能,并对目前所存在的问题以及今后的发展进行了总结和展望。     

g-C3N4/Ag/TiO2复合材料的构筑及其光催化性能（英文）

以合成的g-C3N4纳米片和Ag/TiO2空心微球为原料,采用机械搅拌的方法构筑了g-C3N4/Ag/TiO2三元复合光催化剂。采用X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、扫描电镜(SEM)、X射线光电子能谱(XPS)、紫外-可见光漫反射(UV-Vis DRS)和光致发光光谱(PL)对g-C3N4/Ag/TiO2进行了表征。研究表明,g-C3N4/Ag/TiO2是由Ag/TiO2微球和g-C3N4纳米片复合而成的。与TiO2相比,其可见光响应范围延长,光生载流子的分离速率加快。在室温下,用降解罗丹明B的反应考察了g-C3N4/Ag/TiO2的可见光催化活性。研究表明,光照180 min时,g-C3N4(0.5%)/Ag/TiO2显示了最高的光催化活性(91.9%),分别是TiO2和Ag/TiO2的7.5和1.8倍。光催化活性的提高与合理的异质结构建和Ag的导电性能有关。     

共价有机框架催化材料:二氧化碳转化与利用

多相催化二氧化碳(CO₂)高效转化为高附加值的精细有机化学品和化工燃料,具有非常重要的研究价值和工业应用潜力。共价有机框架材料(Covalent Organic Frameworks, COFs)由于其高比表面积、有序的孔道结构、高化学和热稳定性、可控的催化位点等特性,在CO₂吸附和转化方面都展现出突出的优势。通过合理的策略从分子水平对其孔道或表面进行改性引入功能性物种或催化活性位点,能够有效实现其对特定反应的选择性调控并提供物质传输的有利微环境,因此COFs材料近年来在CO₂催化转化领域中得到了迅速的发展,也具有良好的应用前景。本文针对近几年COFs材料在CO₂转化为重要化学品的研究领域进行了简要的综述,总结当前存在的问题,并对COFs催化材料今后在CO₂转化领域的发展进行了展望。     

以酚醛树脂为碳源原位合成富锂层状相/尖晶石/碳核壳结构正极材料及其电化学性能

通过酚醛树酯包覆和碳热反应在富锂正极材料表面原位构建碳和尖晶石双壳保护结构, 对这种核壳结构的正极材料进行了结构和形貌表征, 并研究了其电化学性能. 研究发现, 尖晶石相为材料提供了三维锂离子迁移通道, 碳包覆层显著提高了正极材料的电子电导率, 两种效应的共同作用极大降低了材料的电化学阻抗, 提升了材料的放电比容量, 这种多壳层结构正极材料还具有优异的倍率性能, 在5C倍率下放电比容量可达到135.1 mA·h/g.     

Preparation and Properties of Poly（ether ether ketone）/Carbon Nanotube Modified Polypropylene Janus Composite Separator北大核心CSCD

Lithium-ion batteries （LIBs）have attracted wide attention because of their broad prospects in electric vehicles. However,the safety problems and low multiplier performance of the commercial polyolefin separator limit their further development,due to the poor dimensional thermal stability and low electrolyte absorption rate. Poly（ether ether ketone）（PEEK）and carbon nanotube（CNT）are compounded to coat on polypropylene （PP） to prepare Janus composite separator （PP@C） through the phase inversion method. PP@C composite separator does not deform at 180 ℃ for 0. 5 h（only slight deformation）,illustrating excellent thermal stability. The electrolyte absorption rate of PP@C2 is 193. 8%. The electrolyte uptake rate of the PP@C2 composite membrane was 193. 8%,which was 64. 5% higher than the PP membrane,showing a superduper electrolyte permeability. As a result,the specific discharge capacity of LIBs assembled with PP@C2 composite separator is 157. 6 mA·h/g at 0. 2 C and 129. 8 mA·h/g at 2 C,showing good rate performance with the capacity recovery rate of more than 99%. This might be attributed to the ultra-high thermal stability of PEEK,the good affinity of the electrolyte,the high conductivity of CNT,as well as the uniform dispersion of Li+ ,so that the separator can have excellent electrochemical performance while improving safety. © 2022, Science Press (China). All rights reserved.     

p区金属基电催化还原二氧化碳制甲酸催化剂研究进展

以清洁可再生电能为驱动力,常温常压下将二氧化碳(CO₂)选择性还原转化生成高附加值化学品或燃料,是解决目前能源和环境问题、实现CO₂资源化利用、促进碳循环回归平衡的有效手段之一。由于生成不同产物的还原电位和反应历程不同,单位产物的生产成本各有差异。最近研究表明,HCOOH是所有电化学CO₂还原产物中最具有经济效益和实用价值的产物之一。本文从电催化还原CO₂制HCOOH生成机理出发,综述了p区金属(如Sn、Bi、In)基催化剂在电催化还原CO₂制HCOOH领域取得的重要研究进展,其中以典型催化剂为例分析了CO₂还原生成HCOOH活性提高策略如氧化物还原转化、形貌调控、掺杂和合金化等,重点探讨了活性位点种类、数量以及催化剂电子结构在关键中间体*CO₂^.-、*OCHO的形成和吸附中的作用,最后总结了目前该领域面临的挑战以及未来发展方向。