Influence of acid treatments of carbon nanotube precursors on Ni/CNT in the synthesis of carbon nanotubes

The Ni/CNT catalyst was fabricated by directly dipping carbon nanotube precursors refluxed in 4 M of nitric acid into Ni electroless plating bath, and used to synthesize new carbon nanotubes. The experimental results indicate that the duration of acid-treatment of carbon nanotubes precursors exerts a great influence on the catalysis of Ni/CNT in the synthesis of carbon nanotubes and hence the structures of the new carbon nanotubes. When the carbon nanotubes precursors were refluxed for 0.5 h in 4 M of nitric acid, bamboo-shaped carbon nanotubes (BSCNT) or Y junction carbon nanotubes in the carbon products were obtained. As the duration of acid-treatment of carbon nanotubes precursors increased to 6 h, the as-prepared Ni/CNT displayed higher activity, and the carbon nanotube products were high pure without any Y junction structure or any separation layers in hollow.     

Electrosorption of hydrogen into palladium-gold alloys

Hydrogen electrosorption into Pd-Au alloys has been studied in acidic solutions (1 M H₂SO₄) using cyclic voltammetry. Pd-Au electrodes with limited volume were prepared by electrochemical co-deposition. It was found that the maximum H/(Pd+Au) ratios decrease monotonically with increasing gold content and reach zero at ca. 70 at% Au. Similarly to the case of Pd limited volume electrodes, two peaks in the hydrogen region, corresponding to two types of sorbed hydrogen, are observed on voltammograms for Pd-rich alloys. The hydrogen capacity, H/(Pd+Au), measured electrochemically, depends on the sweep rate in the cyclic voltammetry experiments, which suggests that two different mechanisms for hydrogen desorption from the Pd-Au alloy are possible. After a strong decrease of Pd concentration at the electrode surface, caused by long cyclic polarization to sufficiently anodic potentials, the amount of absorbed hydrogen is still significant for alloys initially rich in Pd. The results obtained from CO adsorption experiments suggest that only Pd atoms are active in the hydrogen absorption/desorption process. Electronic Publication     

DYNAMIC PROPERTIES OF MAIN SOUNDER IN BLACK CICADA (C. atrata Fabricius)~*

In this paper, the dynamic properties of the main sounder (the sounding muscle (SMc) and the sounding membrane (SM)) and the generating mechanism of amplitude-modulation pulse train (AMPT) are given. The acting process of SMc is a quasi-simple harmonic contraction vibration. The amplitudes of soundless and sounding contracting motion are about 17.2 /μm and 29.4/μm, respectively, and the efficiency of dynamic sounding is about 17％, The unsounded motion of SM is a quasi-simple harmonic vibration, and the amplitude is about 7.81/μm. The sounding motion of SM is a complex vibration, and the amplitude is about 12.66 μm. In each syllable of the song, AMPT_(1,2,3) are separately produced by driving vibrations (V_1,2,3)) of three long ribs in the upper half of SM, and the peaks of V_(1,2,3) lead the first pulse of high amplitude in AMPT_(1,2,3) by 0.156 ms, respectively. The membrane structure in the lower half of SM is mainly to transmit contracting movement of SMc.     

Liquid chromatography of carbon clusters

Summary A comparison of three binary mobile phases in LC separation of C₆₀ and C₇₀ fullerences on chemically bonded 2,4-dinitroanilinopropyl (DNAP) stationary phase was carried out, n-Hexane-benzene has been found to be the best mobile phase for efficient separation of the all-carbon molecules permitting high loads in preparative LC.     

碳纳米管/ZnO纳米复合体的制备和表征

通过将不同直径的ZnO纳米颗粒与碳纳米管连接制备了碳纳米管/ZnO纳米复合体. 将团聚的ZnO纳米颗粒分散并用表面活性剂CTAB使纳米颗粒带正电. 化学氧化碳纳米管使其带负电. ZnO/CTAB微团通过碳管表面羧基与CTAB的静电作用与碳纳米管连接形成纳米复合体. 研究了复合体形成的不同实验条件, 表征了碳纳米管/ZnO纳米复合体的结构并研究了纳米复合体的光学特性. 研究表明, 与碳纳米管连接的ZnO纳米颗粒是互不连接的并保持量子点的特性. 光致发光研究表明ZnO纳米颗粒的激发在纳米复合体中有淬灭.     

Production ofL-glutamate oxidase andin situ monitoring of oxygen uptake in solid state fermentation ofstreptomyces sp. Nl

Effects of water content and carbon and nitrogen sources on the production ofL-glutamate oxidase (GOD) by solid state fermentation (SSF) ofStreptomyces sp. N₁ were investigated in a 250-mL shake flask. The results show that in the solid medium containing wheat bran 98% (w/w), KCl 0.2% (w/w), and MgCl₂ 0.2% (w/w), addition of 2.0-mL water per gram solid medium and 0.4% (w/w) (NH₄)₂SO₄ was the best for GOD production. In this work, we also developed a simple technique forin situ measuring oxygen uptake rate (OUR) and carbon dioxide evolution rate (CER) in SSF in a shake flask based on the principle of Warburg manometer. The method was successfully applied to determine OUR and CER values in SSF ofStreptomyces sp. N₁. The results indicate that the largest OUR value was detected about one or two days ahead of the highest GOD activity reached depending on the fermentation conditions, and the OUR may be used as anin situ indicator of GOD production in the SSF process.     

Effect of surface treatment on the Hamaker constant of intermediate modulus carbon fibers

The Hamaker constant of unsized intermediate modulus carbon fibers was evaluated by contact angle measurement following the Fowkes theory of interfacial energetics. The effects of a surface treatment (performed by the manufacturer) and an oxygen plasma treatment (performed by us), both of oxidizing nature, proved to slightly increase the value of the Hamaker constant to a level that enhanced by about 9% the Lifshitz-van der Waals contribution to the theoretical adhesion force between the fiber and an epoxy matrix. A possible explanation of the observed increase of the Hamaker constant is the higher contribution to the overall Lifshitz-van der Waals interaction of Keesom (orientation) and Debye (induction) forces.     

载氧化钌碳纳米管超级电容器电极

研究了一种采用溶胶-凝胶方法制备超细氧化钌粉末的新方法，该方法制备的氧化钌电极材料在250 ℃热处理后具有570 F•g－1的比电容量并具有典型的多孔特征.通过在碳纳米管表面化学沉积氧化钌的方法制备了不同成分的氧化钌/碳纳米管复合电极,并探讨了其电化学伏安特性和直流充放电特性.该复合电极具有高能量密度特性，同时还具有良好的高功率放电特性.     

二氧化碳在高分子合成中的应用

综述了ＣＯ２在高分子合成中的研究现状，介绍了以ＣＯ２为原料合成高分子的经典方法和新型等离子体聚合法，在此基础上对ＣＯ２在高分子材料领域中的应用作了展望。     

A novel zirconocene/ultradispersed diamond black powder supported catalytic system for ethylene polymerization

A novel carrier of ultradispersed diamond black powder (UDDBP) was used to support metallocene catalyst. Al₂O₃ was also used as carrier in order to compare with UDDBP. Supported catalysts for ethylene polymerization were synthesized by two different reaction methods. One way was direct immobilization of the metallocene on the support, the other was adsorption of MAO onto the support followed by addition of the metallocene. Four supported catalysts Cp₂ZrCl₂/UDDBP, Cp₂ZrCl₂/Al₂O₃, Cp₂ZrCl₂/MAO/UDDBP and Cp₂ZrCl₂/Al₂O₃/MAO were obtained. The content of the zirconium in the supported catalyst was determined by UV spectroscopy. The activity of the ethylene polymerization catalyzed by supported catalyst was investigated. The influence of Al/Zr molar ratio and polymerization temperature on the activity was discussed. The polymerization rate was also observed.