Purification and analysis of partially alkylated cyclodextrins by liquid and gas chromatography

Complex mixtures of partially alkylated cyclodextrins can be analyzed by both HPLC and high temperature capillary GC. Because of the limited efficiency of LC, suitable analytical and preparative separations can be achieved only with systems of carefully optimized selectivity. Using LC it has been possible to isolate and purify single cyclodextrin species from very complex mixtures of components which contain unreacted hydroxyl groups in addition to the alkoxy groups. Analysis of the reaction mixtures and of fractions taken from LC separations can be performed with advantage by high resolution capillary GC at high temperatures between 300 and 400 °C. The thermal stability of partially alkylated cyclodextrins in high temperature GC is considerably increased by trimethylsilylation of the free hydroxyl groups. Fast atom bombardment mass spectrometry and proton NMR were used to identify species isolated from the preparative LC separations.     

Improvement of the electrophoretic protein profiles of Leguminosae gums extracts using gamanase and application to the evaluation of carob-guar mixtures

A quantitative assay for guar gum in carob gum, based on the extraction of proteins in acetonitrile-water (7:3), separation by capillary electrophoresis and multiple linear regression (MLR) using the areas of nine selected peaks as predictors, was improved by performing the extraction in the presence of gamanase. In the absence of the enzyme, peak migration times and areas depended on the guar content, which complicated peak identification and evaluation. Manual correction of the migration times by comparison with standard electropherograms obtained with pure carob and carob-guar mixtures was required; however, when the proteins were extracted under sonication at 60 °C for 30 min in the presence of gamanase, the migration times and peak areas did not vary with the composition of the carob-guar mixtures, and its reproducibility improved largely. These effects were attributed to the reduction of the viscosity of the extracts and the removal of the galactomannose interactions with the proteins and the capillary walls. Peak identification and evaluation were easily and directly performed on these electropherograms without further processing. An MLR model constructed with 36 carob-guar mixtures containing up to 20% guar, and by measuring the areas of 12 selected peaks and using eight of them as predictors, yielded a detection limit of 2.8% guar (α=β=0.05 criterion). A model of similar quality was obtained by partial least-squares (PLS) regression.     

Stability of the FID sensitivity during an analysis in capillary GC

The sensitivity of an FID may change when the carrier gas flow rate changes during a chromatographic run. Sample parts which are eluted at reduced FID sensitivity produce a reduced peak area, hence are discriminated as compared to other components. Sensitivity changes were studied for hydrogen as carrier gas. For the detector tested, differences in the carrier gas flow rates of 1 ml/min shifted the FID sensitivity by 1 to 5% (depending on the fuel gas supply). Thus the stability of the sensitivity is no longer ensured as soon as the carrier gas flow rate is changed manually or by an automatic programmer during an analysis. Sensitivity drifts may also occur during temperature programmed runs with a pressure regulated carrier gas supply since the gas flow through the capillary drops with increasing temperature. Such shifts in the response became noticeable as soon as relatively high carrier gas flow rates combined with long range temperature programmes were used. The typical patterns of such discriminations are shown, closing with a discussion on the possibilities for minimizing such undesired effects.     

毛细管电泳法研究提取剂对黄连-黄柏共煎剂中生物碱含量的影响

用毛细管电泳法,对黄连与黄柏配伍后共煎剂中的主要生物碱进行了分析。以50 mmol/L Na2B4O7(pH=7)-CH3OH(85:15,V/V)为背景电解质,操作电压为14 kV,电迁移进样10 kV×5s,柱上223 nm检测,5种主要生物碱9 min内可在50 cm×75μm毛细管上实现基线分离。以小檗碱、巴马汀的提取量为指标,分析了提取剂对提取效果的影响。以30％的乙醇水溶液为提取剂,可得到最大煎出量。     

An ultrasensitive method for the determination of thiouracil and phenylthiouracil using capillary zone electrophoresis and laser-induced fluorescence detection

This paper reports the development of a method based on capillary electrophoresis with laser-induced fluorescence detection for the simultaneous determination of thiouracil (TU) and phenylthiouracil (PhTU) with high sensitivity (nanomolar range, i.e., attomoles detected). After derivatization with 5-iodoacetamidofluorescein, the analytes were separated by capillary zone electrophoresis using 20 mM phosphate buffer (pH 10.0) and quantified by fluorescence detection. The linearity range, precision, recovery, and detection limits were determined, and the method was shown to be applicable for the determination of TU and PhTU in spiked feed samples and urine.     

Artificial neural networks for quantification in unresolved capillary electrophoresis peaks

The application of the combination of experimental design (ED) and artificial neural networks (ANNs) for the quantification of overlapped peaks in capillary zone electrophoresis is described. When the total separation cannot be achieved by separation techniques, the use of ED-ANN can be a suitable approach. The unstability of EOF causes peak shift that has to be corrected in order to apply ED-ANN methods. In this work, normalization procedure of electropherograms with consequent application of ANNs for quantification purpose was developed. Both, spectra and electropherograms can be used as multivariate data. In general, both kinds of data were found to be suitable for unresolved peaks quantification by ED-ANN approach.     

一种新型毛细管电泳—电感耦合等离子体光谱法接口装置

毛细管电泳是一种高效、简便的分离方法，已被用于生物、环境及临床等试样的分离及分析[1]．检测技术在毛细管电泳中占有重要的地位，目前，在柱紫外可见及荧光检测是两种广为接受的检测方法，但其检测灵敏度仅为10－5～10－6mol／L[2]．电感耦合等离子体光谱（ICP－AES／MS）是一种灵敏的元素选择性的分析方法，已被广泛地用于各种试样中元素分析．近年来，该方法作为色谱及毛细管电泳的检测器，被用于元素的形态分析[3]．在毛细管电泳（CE）与ICP光谱连用技术中，挑战性的工作是设计一种能把CE与ICP相连的接口．目前已有几种接口…     

Topographical properties of polymer films deposited in capillaries for electrophoretic separations of large organic molecules

Topography and thickness of hydrophilic polymer coatings of fused-silica capillaries for capillary electrophoresis (CE) were investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), and profilometry. Three hydrogels, poly(2-hydroxyethyl methacrylate) [poly(HEMA)], poly(diethylene glycol monomethacrylate) [poly(DEGMA)], and poly(triethylene glycol monomethacrylate) [poly(TEGMA)], were deposited using two procedures, either by simple physical sorption of the polymers, or by derivatization of the capillary wall surface with glycidyl methacrylate (EPMA) followed by polymerization of the appropriate monomers. The performance of the modified capillaries was tested under CE conditions (decrease in the electroosmotic flow, EOF dependence on pH, separation of milk and standard proteins). It has been found that the most important property of the polymer coating is its thickness, whereas its topography and the degree of its hydrophobicity are less significant. Film deposition by physical adsorption is preferable to polymerization on the derivatized surface.     

Reaction and mass transfer effects in a catalytic monolith reactor

Zeolite-based monoliths (Cu/ZSM-5 on cordierite) are prepared and used to catalyze direct decomposition of nitrogen monoxide. Two-dimensional heterogeneous model is applied to describe the behavior of the monolith reactor, with the emphasis on the features introduced due to coupling of flow, mass transfer and chemical reaction. The proposed model has been verified by comparing computer simulation data with laboratory experimental data. It is shown that both inter- and intraphase diffusion limitations have to be considered when modeling complex reactor configuration, such as monolith reactors, especially when monolith with thicker catalytic layer are used at higher temperatures.     

Determination of diethanolamine or <Emphasis Type="Italic">N</Emphasis>-methyldiethanolamine in high ammonium concentration matrices by capillary electrophoresis with indirect UV detection: application to the analysis of refinery process waters

Alkanolamines such as diethanolamine (DEA) and N-methyldiethanolamine (MDEA) are used in desulfurization processes in crude oil refineries. These compounds may be found in process waters following an accidental contamination. The analysis of alkanolamines in refinery process waters is very difficult due to the high ammonium concentration of the samples. This paper describes a method for the determination of DEA in high ammonium concentration refinery process waters by using capillary electrophoresis (CE) with indirect UV detection. The same method can be used for the determination of MDEA. Best results were achieved with a background electrolyte (BGE) comprising 10 mM histidine adjusted to pH 5.0 with acetic acid. The development of this electrolyte and the analytical performances are discussed. The quantification was performed by using internal standardization, by which triethanolamine (TEA) was used as internal standard. A matrix effect due to the high ammonium content has been highlighted and standard addition was therefore used. The developed method was characterized in terms of repeatability of migration times and corrected peak areas, linearity, and accuracy. Limits of detection (LODs) and quantification (LOQs) obtained were 0.2 and 0.7 ppm, respectively. The CE method was applied to the determination of DEA or MDEA in refinery process waters spiked with known amounts of analytes and it gave excellent results, since uncertainties obtained were 8 and 5%, respectively.