Rapid capillary zone electrophoresis method for the determination of metal cations in beverages

A rapid and reliable capillary zone electrophoresis method for the determination of inorganic cations was developed. The complete separation of K⁺, Ba²⁺, Ca²⁺, Na⁺, Mg²⁺, Mn²⁺, Ni²⁺, Cd²⁺, Li⁺ and Cu²⁺ can be achieved in 4 min with a simple electrolyte composed by 10 mM imidazole as the carrier buffer and background absorbance provider and acetic acid as the complexing agent (pH 3.60). Injection was performed hydrostatically by elevating the sample at 10 cm for 30 s. The running voltage was +25 kV at room temperature. Indirect UV-absorption detection was achieved at 185 nm. The detection limit was in the range between 0.06 mg/l (Mg²⁺) and 0.57 mg/l (K⁺) and the quantification limits ranged from 0.10 mg/l (Ni²⁺) to 0.80 mg/l (Cu²⁺). The calibration graphs were linear in the concentration range from the quantification limit till at least 1 g/l in K⁺, 10 mg/l in Ba²⁺, Ca²⁺, Mg²⁺, Mn²⁺, Ni²⁺ and Cd²⁺, 40 mg/l in Na⁺ and 12 mg/l in Li⁺ and Cu²⁺. The repeatability, intraday and interday analysis were ≤1.55% and ≤3.64% for migration time and ≤3.38% and ≤3.63% for peak area. The method developed has been applied to several beverage samples with only a simple dilution and filtration treatment of the sample. The proposed method is simple, fast, cheap and it is achieved with common products in either laboratory. For these reasons, it is a very useful method for routine analysis.     

CE-LIF coupled with flow cytometry for high-throughput quantitation of fluorophores in single intact cells

We report a method of coupled CE-LIF detection with flow cytometry for high-throughput determination and quantitation of fluorophores in single intact K562/S (KS) cells. The membrane properties of KS cell including fluophore transport rate and apparent permeability coefficient were further quantitatively characterized. The method has advantages for accurate quantitation and unique capacity of high-throughput analysis. The strategy will be useful for the quantitation of fluorophores in the intact cells, such as measurement of multidrug resistance, quantitation of specific protein expression, and quantitative characterization of protein and enzyme functions.     

Micellar electrokinetic biofluid analysis of biogenic amines using on-line sample concentration and UV laser-induced native fluorescence detection

A simple and sensitive sweeping micellar electrokinetic chromatography method coupled with UV laser-induced native fluorescence detection has been developed for quantitative analysis of biogenic amines in biofluids. The background electrolyte comprised 30 mmol L⁻¹ phosphoric acid and 20 mmol L⁻¹ sodium dodecyl sulfate. The concentration limits of detection of analytes using sweeping-micellar electrokinetic chromatography (sweeping-MEKC) were in the range 7–100 nmol L⁻¹, which were 250–3600-fold improvement for dopamine, DOPA and epinephrine compared with conventional capillary zone electrophoresis. An improvement of approximately 20-fold was observed for all analytes compared with typical micellar electrokinetic chromatography conditions. Baseline separation was achieved for the all analytes within 12 min and migration-time and peak-area repeatability were better than RSD 0.35% and 5.68%, respectively. The developed method was applied to measure the biogenic amines in biofluids extracted from wheat phloem sap, human plasma and human urine.     

Separation of phenolic acids by capillary electrophoresis with indirect contactless conductometric detection

A new method for the electrophoretic separation of nine phenolic acids (derivatives of benzoic and cinnamic acids) with contactless conductometric detection is presented. Based on theoretical calculations, in which the mobility of the electrolyte co- and counterions and mobility of analytes are taken into consideration, the electrolyte composition and detection mode was selected. This approach was found to be especially valuable for optimization of the electrolyte composition for the separation of analytes having medium mobility. Indirect conductometric detection mode was superior to the direct mode as predicted theoretically. The best performance was achieved with 150 mM 2-amino-2-methylpropanol electrolyte at pH 11.6. The separation was carried out in a counter-electroosmotic mode and completed in less than 6 min. The LODs achieved were about 2.3-3.3 microM and could be further improved to 0.12-0.17 microM by using a sample stacking procedure. The method compares well to the UV-Vis detection.     

Application of poly(methacrylic acid-ethylene glycol dimethacrylate) monolith microextraction coupled with capillary zone electrophoresis to the determination of opiates in human urine

A novel poly(methacrylic acid-ethylene glycol dimethacrylate) (MAA-EGDMA) monolith microextraction method coupled with CZE was proposed for rapidly determining a mixture of opiates comprising heroin, 6-monoacetylmorphine, morphine, codeine, papaverine, and narcotine in human urine. The extraction device contained a regular plastic syringe, the poly(MAA-EGDMA) monolithic capillary tube (530 microm id x 3 cm) and a plastic pinhead, which connected the monolithic capillary tube and the syringe without leakage. In the polymer monolith microextraction, the sample solution was ejected via the monolithic capillary tube by a programmable syringe pump, followed by desorption with an aliquot of appropriate solution, which was collected into a vial for the subsequent analysis by CZE. The best separation was achieved using a buffer composed of 0.1 M disodium hydrogen phosphate (adjusted to pH 4.5 with 1 M hydrochloric acid) and 20% methanol v/v with temperature and voltage of 25 degrees C and 25 kV, respectively. By applying electrokinetic injection with field-enhanced sample stacking, detection limits of 6.6-19.5 ng/mL were achieved. Excellent method of reproducibility was found over a linear range of 80-2000 ng/mL.     

Comparative validation of amisulpride determination in pharmaceuticals by several chromatographic, electrophoretic and spectrophotometric methods

Depleted uranium (DU) is a by-product of the uranium enrichment process for nuclear fuel. According to the Commission Decision 2002/657/EC, a confirmatory method for the quantification of DU in freeze-dried fish was developed by isotope ratio dynamic reaction cell inductively coupled plasma-mass spectrometry (IR-DRC-ICP-MS). A preliminary study was performed to determine the following parameters: instrumental detection limit (IDL), isotopic ratio measurement limit (IRML), percentage of DU (P(DU)) in presence of natural uranium (NU) and limit of quantification (LoQ(DU)). The analyses were carried out by means of IR-DRC-ICP-MS. Ammonia was the reaction gas used for the dynamic reaction cell. In addition, a sector field inductively coupled plasma mass spectrometer (SF-ICP-MS) was employed to calculate the within-laboratory reproducibility. For the confirmatory method the following parameters were determined: (a) trueness; (b) precision; (c) critical concentrations alpha and beta (CC(alpha), CC(beta)); (d) specificity; (e) stability. Trueness was assessed by using the recovery tests. The recovery and within-laboratory reproducibility were determined by fortifying the blank digested solution of dogfish tissue: six aliquots were fortified at 1, 1.5 and 2 times the LOQ(DU) with 25.0, 37.5 and 50.0 ng L(-1) or 4.16, 6.24, 8.32 microg kg(-1) with a recovery of -8.2, +9.5 and +9.6%, respectively and a within-laboratory reproducibility (three analytical run) of 15.5, 8.0 and 11.0%, respectively. The results for the decision limit and the detection capability were: CC(alpha) = 11.69 ng L(-1) and CC(beta) = 19.8 ng L(-1). The digested solutions resulted to be stable during testing time (60 days) and the method can be considered highly specific as well.     

Ca~(2+)增敏米诺环素荧光显微成像技术应用于米诺环素的检测

应用固载表面毛细流自组装环荧光显微成像技术,建立了Ca2+增敏米诺环素荧光体系测定牛奶中米诺环残留量的分析方法。将米诺环素溶液与一定量的氯化钙溶液,pH 8.50的氨性缓冲溶液及PVA-124溶液充分混合均匀。反应10 min后,滴在疏水性载玻片表面上,微波加热,溶剂受热挥发后,形成直径约为1.7 mm,环带宽约为45.3μm的自组装环。当点样体积为0.3μL时,线性范围为5.6×10-13~1.8×10-11mol,方法的检出限(3σ)为5.6×10-14mol。应用于米诺环素胶囊中米诺环素和牛奶中残留米诺环素的检测,回收率分别为104.3%~105.0%和96.0%~105.9%,相对标准偏差(n=5)小于3.5%。     

Highlighting the possible secondary interactions in the role of balhimycin and its analogues for enantiorecognition in capillary electrophoresis

It is believed that the enantiorecognition mechanism based on macrocyclic antibiotics involves multimodal interactions via hydrogen bonding, π–π interaction, steric hindrance, hydrophobic interaction and so on. A variety of enantiomeric N-benzoylated amino acids were separated using balhimycin (A) or its analogues bromobalhimycin (B) and dechlorobalhimycin (C) as chiral mobile phase additive using a CE method, which combined the partial filling technique with the dynamic coating technique and the co-EOF electrophoresis technique. The enantioresolution and the migration time were highly relevant to the structure of analytes, especially to the substitutions on the N-tagged benzoyl moiety of the amino acids. A steric effect and π–π interaction based mechanism is proposed in order to explain some observed enantioresolution differences between positional isomers. Notably dechlorobalhimycin exhibited the best enantioresolution for several N-benzoylated derivatives of leucine, which was rarely observed for N-dansylated amino acid derivatives. The hydrophobicity difference of the aglycone pocket among three chiral selectors was assumed to account for this behaviour.     

A highly efficient capillary electrophoresis-based method for size determination of water-soluble CdSe/ZnS core-shell quantum dots

This paper describes a highly efficient method for size determination of water-soluble CdSe/ZnS core-shell quantum dots (QDs) by capillary electrophoresis (CE) using polymer additive as sieving medium. The influence of some factors, such as kinds and concentrations of the sieving medium, pH, concentrations of the background electrolyte (BGE) and applied voltage, on the separation of QDs was investigated. Under the optimal separation conditions, four different sized QDs were successfully separated, and the relative standard deviation (RSD) of the migration times for these QDs was below 1.013%. In addition, an equation was fit by taking into account the correlation existing between the electrophoretic mobilities and the sizes of a set of QDs. The feasibility of this equation to measure the sizes of other QDs was confirmed by comparison with the sizes obtained by transmission electron microscopy (TEM) experiment. This work offers a novel method for size determination of QDs, and provides an important reference on the study of QDs based on CE.