A microconductometric biosensor based on lipase extracted from Candida rugosa for direct and rapid detection of organophosphate pesticides

Organophosphate pesticides (OPs) have been intensively used as insecticides in agriculture; after entering the aquatic environment, they may affect a wide range of organisms. A conductometric enzymatic biosensor based on lipase extracted from Candida rugosa (CRL) has therefore been developed for the direct and rapid quantitative detection of organophosphate pesticides: diazinon, methyl parathion and methyl paraoxon in water. The biosensor signal and response time were obtained under optimum conditions, the enzyme being immobilised in the presence of gold nanoparticles. Under these conditions, the enzymatic biosensor was able to measure concentrations as low as 60 µg/L of diazinon, 26 µg/L of methyl parathion and 25 µg/L of methyl paraoxon very rapidly (response time: 3 min). Moreover, this CRL biosensor was not sensitive to interferences such as carbamates. It presented good storage stability for 21 days when kept at 4°C and it was successfully applied to real samples.     

Ring‐Closing and Cross‐Metathesis with Artificial Metalloenzymes Created by Covalent Active Site‐Directed Hybridization of a Lipase

A series of Grubbs‐type catalysts that contain lipase‐inhibiting phosphoester functionalities have been synthesized and reacted with the lipase cutinase, which leads to artificial metalloenzymes for olefin metathesis. The resulting hybrids comprise the organometallic fragment that is covalently bound to the active amino acid residue of the enzyme host in an orthogonal orientation. Differences in reactivity as well as accessibility of the active site by the functionalized inhibitor became evident through variation of the anchoring motif and substituents on the N‐heterocyclic carbene ligand. Such observations led to the design of a hybrid that is active in the ring‐closing metathesis and the cross‐metathesis of N,N‐diallyl‐p‐toluenesulfonamide and allylbenzene, respectively, the latter being the first example of its kind in the field of artificial metalloenzymes.     

Enantioselective synthesis of (1S,4R)-N-(benzylcarbamoyl)-4-aminocyclopent-2-en-1-ol by Candida antarctica lipase B

An efficient biocatalytic process has been developed to obtain optically pure (1S,4R)-N-(benzylcarbamoyl)- 4-aminocyclopent-2-en-1-ol which can be used as the key intermediate of ticagrelor. In this research, several N-(benzylcarbamoyl)-4-aminocyclopent-2-en-1-ol derivatives have been investigated in which Candida antarctica lipase B (CALB) was used to catalyze the asymmetric hydrolysis reaction. As expected, some of these substrates successfully gave (1S,4R)-N-(benzylcarbamoyl)-4-aminocyclopent- 2-en-1-ol in >98% enantiomeric excess (ee) with conversion yields up to 45%.     

No Strain,No Gain? Enzymatic Ring‐Opening Polymerization of Strainless Aliphatic Macrolactones

Starting from readily available oleic and erucic acid, macrocyclic nonadecalactone (C₁₉) and tricosalactone (C₂₃) can be synthesized in polymerization grade purity in a four‐step reaction sequence. Ring‐opening polymerization (ROP) of these strainless macrolactones can be performed utilizing an enzyme as a catalyst. Despite the missing ring‐strain as key driving force for smaller (strained) lactones, high molar masses (M _n ≈ 10⁵ g mol⁻¹) can be accessed in an entropically driven ROP. Polyester‐19 and polyester‐23 prepared feature melting temperatures well above 100 °C. Further analysis of the mechanical properties of these materials displays the resemblance to polyethylene. For example, Young's moduli on the order of 600 MPa are observed as a result of the high crystallinity of the polymer.

     

Full enzymatic hydrolysis of commercial sucrose laurate by immobilized-stabilized derivatives of lipase from Thermomyces lanuginosa

Sucrose laurate is a detergent that is useful for various biochemical applications because it is a green compound and is easily degradable after hydrolysis with a lipase or esterase. One problem observed in the process of sucrose laurate degradation is that most commercial detergent preparations are impure, necessitating the hydrolysis of all of the sucrose esters present in the preparation, all of them with detergent properties. In this article, a highly active catalyst, which is able to perform the hydrolysis of commercial sucrose laurate, is presented. The use of glyoxyl agarose preparations of a previously aminated Thermomyces lanuginosa lipase (TLL) enabled complete hydrolysis, in less than 30 min, of all of the compounds that comprise the mixture. In addition, this derivative is stable in the presence of 20% ethanol, which is necessary to prevent microbial contamination.     

碳酸钙固定化猪胰脂肪酶的制备及活性研究

本文利用市售普通碳酸钙(general calcium carbonate,GCC)作为猪胰脂肪酶(PPL)固定化的载体材料,研究了不同固定化条件对所制备的固定化酶活性的影响.结果显示PPL固定化于GCC上的最佳制备工艺为:将20 mL酶液与1.50 g GCC放入置于摇床内的三角瓶中,摇床温度设为40℃,摇床转速设为...     

Wood cellulignin as an alternative matrix for enzyme immobilization

The objective of this work was to select an efficient methodology for preparing active samples of Candida rugosa lipase immobilized in wood cellulignin, to be applied in hydrolysis and ester reactions. For this purpose, lipase was immobilized in the matrix by physical adsorption (pure cellulignin) and covalent binding (activated cellulignin with glutaraldeyde or carbonyldiimidazole [CDI]) in the presence or absence of polyethylene glycol (PEG) (Molecular mass of 1500 Daltons) as stabilizing agent. The activating agent and the presence of PEG-1500 in the immobilization procedure showed a strong influence on enzyme retention in the support. The values for enzyme retention ranged from 20 to 68%, and the highest yield was obtained when the enzyme was immobilized in cellulignin activated with CDI in the presence of PEG-1500. This immobilized derivative presented high hydrolytic (193.27 μM/[mg·min]) and synthetic (522.92 μM/[g·min]) activities when compared with those obtained by other techniques. The superiority of this immobilized system was confirmed by additional analyses, such as infrared spectroscopy and elemental analysis, which demonstrated an appropriate enzyme fixation and the highest level of protein incorporation in the support. Further information on the immobilized derivative was obtained by assessing the recycle potential in both aqueous and nonaqueous media.     

Enzymatic ring-opening polymerization of 2,2-dimethyltrimethylene carbonate catalyzed by PPL immobilized on silica nanoparticles

Silica nanoparticles were first used as the carrier for the porcine pancreas lipase (PPL) immobilization. The result of transmission electron microscopy (TEM) showed that the immobilized lipase was still in nanosize after enzyme immobilization. The ring-opening polymerization of 2,2-dimethyltrimethylene carbonate (DTC) catalyzed by this immobilized PPL (IMPPL) was explored. ¹H NMR spectra suggested no evidence of decarboxylation during propagation. Influences of IMPPL concentration and reaction temperature on the molecular weight and yield of poly(DTC) were studied. The recovery and reuse of IMPPL for the ring-opening polymerization of DTC was also investigated. The recycling IMPPL showed even higher catalytic activity and a higher molecular weight of polycarbonate could be achieved.     

Shaping and Mechanical Reinforcement of Silica Aerogel Biocatalysts with Ceramic Fiber Felts

The synthesis of silica aerogels reinforced with either carbon or silica fibre felts and which encapsulate the lipase PS of Amano (LPS AB025407) obtained from Burkholderia cepacia is described. The materials were further shaped by moulding them in Teflon^® tubes. The silica aerogels were synthesized with various ratios of hydrophobic groups and dried according to the supercritical CO₂ method. Both types of reinforcements improve the catalytic activity of the material per mass of lipase. The fibre felts reinforcements also enable the encapsulation of higher concentrations of lipase. The materials were shaped into small moulded monoliths, which were readily washed and recycled without significant mechanical deterioration or loss of catalytic activity. In addition, hydrophobic carbon felts reinforce more efficiently silica aerogels that incorporate a high ratio of hydrophobic groups, while silica felts strengthen those aerogels that carry a low proportion of hydrophobic groups.