纳米镍钴铁氧体空心微球的制备与性能

以乙二醇为溶剂,氯化铁、氯化钴、氯化镍和醋酸铵为反应试剂,采用溶剂热法制备纳米Ni_xCo_1-xFe₂O₄(x=0、0.3、0.5、0.7、1)铁氧体空心微球,研究镍含量对铁氧体空心球的磁性与吸波性能的影响。借助X-射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、振动样品磁强计(VSM)和网络分析仪对试样的物相组成、微观形貌和电磁特性进行表征。结果表明制备的镍钴铁氧体为尖晶石结构,且形貌为空心球,粒径在200 nm左右。当x=0时,镍钴铁氧体空心球饱和磁化强度最大为81.7 emu·g^-1,反射损耗在1 658.8 MHz有最小值为-16.9 dB。     

The Synthesis and Characterizations of Calcium Phosphate Nanoparticles via β‐Cyclodextrin,Poly(oxyethylene)5 Nonyl Phenol Ether and Cyclohexane Medium

In this work, the calcium phosphate nanoparticles have been produced by new reverse micro emulsion method containing β‐cyclodextrin, poly(oxyethylene)₅ nonyl phenol ether and cyclohexane. Scanning electron microscope, transmission electron microscope, fourier transform infrared spectroscope and X‐ray diffraction were used to characterize the particles. The sizes of the nanoparticles were identified between 70‐80 nm. In conclusion, these results suggested that the developed reverse micro emulsion system based nanoparticles seem to be a promising formulation for calcium phosphate nanoparticles synthesis and it has immense potential in delivery of drugs and vaccines.     

Palladium supported on zinc ferrite: an efficient catalyst for ligand free C–C and C–O cross coupling reactions

An efficient superparamagnetic Pd–ZnFe₂O₄ solid catalyst has been synthesized by loading Pd(0) species on zinc ferrite nanoparticles. Sonogashira cross couplings between terminal alkynes and aryl halides were achieved in the absence of any Cu co-catalyst. A Heck–Matsuda coupling reaction of structurally different aryldiazonium tetrafluoroborate substrates was preceded at 40 °C in water. Cyanation of aryl halides was successfully done using K₄[Fe(CN)₆] as the cyanide source over Pd–ZnFe₂O₄. The catalyst was also employed for Ullmann type cross coupling reactions. Excellent yield of the products, reusability, and uncomplicated work-up make this catalyst efficient for C–C and C–O coupling reactions. Good yield of products, easy separation, and negligible leaching of Pd from the catalyst surface confirm the true heterogeneity in these catalytic reactions.     

The Periodate‐Based Double Perovskites M2NaIO6 (M = Ca,Sr, and Ba)

The crystal structures of the M₂NaIO₆ series (M = Ca, Sr, Ba), prepared at 650 °C by ceramic methods, were determined from conventional laboratory X‐ray powder diffraction data. Synthesis and crystal growth were made by oxidizing I^– with O₂^(air) to I⁷⁺ followed by crystal growth in the presence of NaF as mineralizator, or by the reaction of the alkali‐metal periodate with the alkaline‐earth metal hydroxide. All three compounds are insoluble and stable in water. The barium compound crystallizes in the cubic space group Fm3m (no. 225) with lattice parameters of a = 8.3384(1) Å, whereas the strontium and calcium compounds crystallize in the monoclinic space group P2₁/c (no. 14) with a = 5.7600(1) Å, b = 5.7759(1) Å, c = 9.9742(1) Å, β = 125.362(1)° and a = 5.5376(1) Å, b = 5.7911(1) Å, c = 9.6055(1) Å, β = 124.300(1)°, respectively. The crystal structure consists of either symmetric (for Ba) or distorted (for Sr and Ca) perovskite superstructures. Ba₂NaIO₆ contains the first perfectly octahedral [IO₆]^5– unit reported. The compounds of the ortho‐periodates are stable up to 800 °C. Spectroscopic measurements as well as DFT calculations show a reasonable agreement between calculated and observed IR‐ and Raman‐active vibrations.     

Influence of caged bicyclic phosphate and CaCO3 nanoparticles on char-forming property of PU rigid foams

Char-forming property of PU rigid foams, which can be assessed by char residue (%) when PU is burned at certain temperature, was studied by TG and DTG. The results showed that pure PU rigid foam had low char residue of only 17%, while 33% of char residue was achieved when PU rigid foam was modified by adding 8 wt% of 1-oxo-2,6,7-trioxa-1-phosphabicyclo[2,2,2] octane (PEPA), which is a caged bicyclic phosphate. The experiment results of FTIR and XPS showed that the PEPA modified PU rigid foam could be dehydrogenated and dehydrated at temperature between 380 and 450 °C, resulting in the increase of char residue of PU rigid foam. Further study also revealed that the addition of CaCO₃ nanoparticles could enhance the char stability when the PEPA modified PU rigid foam was being burned. The mechanism was investigated and it was found that the enhanced char stability could be attributed to the limited permeation of oxygen caused by the formation of calcium phosphate and calcium pyrophosphate by the reaction of PEPA and CaCO₃ at high temperature, which were covered on or buried in the char layer.     

Flow Assurance Issues and Control with Naphthenic Oils

Naphthenic oil production is known to be made difficult by stable emulsion formation and possible scaling of calcium naphthenates. From a flow assurance point of view, it is of major importance to foresee these two possible issues at the earliest stage of the project development especially for deep-offshore fields. In this article, a classification of crude oils based on density, acidity and acid types is proposed. Process schemes adapted to the different oil types are also described.     

铁酸镍用于热化学循环反应CO2分解制CO的研究

采用共沉淀法制备了NiFe₂O₄和NiFe₂O₄/ZrO₂催化剂,用TGA考察了其热化学法,CO₂高温分解反应性能。通过对反应前后催化剂的表征发现,反应高温使两种催化剂都发生了明显的烧结,导致在热还原反应中形成的还原态氧化物不能完全被CO₂氧化从而降低了催化剂的反应性能;ZrO₂的加入对于提高催化剂的热稳定性以及循环反应稳定性具有重要的作用。在高温反应炉中考察了NiFe₂O₄/ZrO₂的CO₂分解实验,结果表明,提高热还原温度可以提高CO产量,然而,随着循环次数的增加CO的产量降低得更明显。     

石墨烯/锌铁氧体复合物的制备及抗菌性能

用氧化还原法和化学共沉淀法分别制备了石墨烯(GE)和石墨烯/锌铁氧体(GE/ZnFe2O4)复合物,通过现代测试技术表征了样品的物相结构、组成和微观形貌.以大肠杆菌、金黄色葡萄球菌和白色念珠菌为测试菌种,分别对样品的抗菌性能进行了研究.结果表明,样品的抗菌活性受GE/ZnFe2O4复合物中GE和ZnFe2O4质量比(mG/Z)以及菌种的影响,其中mG/Z=0.4的复合物对三种菌均有较好的抗菌效果,其最小抑菌浓度分别为25、25和12.5μg/mL;复合物对白色念珠菌的抗菌效果最好,这与菌种的结构有关.此外,对样品的抗菌机理进行了详细研究.     

Synthesis and application of silica and calcium carbonate nanoparticles in the reduction of organics from refinery wastewater

Oil refinery is one of the fast growing industries across the globe and it is expected to progress in the near future. The worldwide increase in the generation of refinery wastewater along with strict environmental regulations in the discharge of industrial effluent, persistent efforts have been devoted to recycle and reuse the treated water. The wastewater from the refining operation leads to serious environmental threat to the ecosystem. Therefore, this study aimed to synthesize silica (SiO₂) and calcium carbonate nanoparticles (CaCO₃) in the reduction of organics from refinery wastewater. The synthesized nanoparticles were employed in the reduction of chemical oxygen demand (COD) from refinery wastewater by studying the influence of solution pH, contact time, dosage of nanoparticles and stirring speed on adsorption performance. From the batch experimental studies, the optimized processing conditions for the reduction of COD using SiO₂ nanoparticles are pH 4.0, dosage 0.5 g, stirring speed 125 rpm and 90 min stirring time, and the corresponding values for CaCO₃ nanoparticles are pH 8.0, dosage 0.4 g, stirring speed 100 rpm and 90 min stirring time. The study demonstrates that SiO₂ and CaCO₃ nanoparticles have a promising future in the reduction organics from refinery wastewater in different pH regimes.