扶手椅型二硫化钼纳米带的电子结构与边缘修饰

采用基于密度泛函理论的第一性原理计算方法, 研究了扶手椅型二硫化钼纳米带的几何构型与电子结构, 发现其稳定性与电子性质敏感地依赖于边缘修饰. 随着边缘修饰的H原子数增加, 纳米带变得更加稳定, 并在间接带隙半导体、半金属和直接带隙半导体之间转变. 纳米带的能带结构和电子态密度显示, 其费米能级附近的能带主要由边缘态贡献. 当二硫化钼纳米带两边用不同数目的H原子修饰时, 纳米带同时具有由这两种修饰引起的边缘态并且两种边缘态的相互影响很小. 研究了三类纳米带带隙与宽度的关系, 对于每个原胞修饰0个或8个H原子的纳米带, 带隙随宽度以3为周期振荡变化; 而对于每个原胞修饰4个H原子的纳米带, 带隙振荡不再具有周期并且振荡幅度变小.     

Hybrid Fibers Made of Molybdenum Disulfide,Reduced Graphene Oxide,and Multi‐Walled Carbon Nanotubes for Solid‐State,Flexible, Asymmetric Supercapacitors

One of challenges existing in fiber‐based supercapacitors is how to achieve high energy density without compromising their rate stability. Owing to their unique physical, electronic, and electrochemical properties, two‐dimensional (2D) nanomaterials, e.g., molybdenum disulfide (MoS₂) and graphene, have attracted increasing research interest and been utilized as electrode materials in energy‐related applications. Herein, by incorporating MoS₂ and reduced graphene oxide (rGO) nanosheets into a well‐aligned multi‐walled carbon nanotube (MWCNT) sheet followed by twisting, MoS₂‐rGO/MWCNT and rGO/MWCNT fibers are fabricated, which can be used as the anode and cathode, respectively, for solid‐state, flexible, asymmetric supercapacitors. This fiber‐based asymmetric supercapacitor can operate in a wide potential window of 1.4 V with high Coulombic efficiency, good rate and cycling stability, and improved energy density.     

二硫化钼粘结固体润滑涂层的径向和切向微动损伤的比较研究

通过径向和切向微动试验考察了二硫化钼粘结固体润滑涂层的微动摩擦学特性 ,并利用扫描电子显微镜、能量色散谱和X射线光电子能谱等分析了两类微动损伤区的微观特征 .结果表明 :二硫化钼粘结固体润滑涂层具有良好的抗径向微动损伤性能 ;切向微动条件下无混合区存在 ,涂层损伤强烈依赖于位移幅值 ,并伴随MoS2 的氧化 ;径向微动损伤呈现切向微动部分滑移区的特征     

Theoretical study of the vibrational frequencies of carbon disulfide

A benchmark comparison for different computational methods and basis sets has been presented. In this study, five computational methods (Hartree–Fock (HF), MP2, B3LYP, MPW1MP91, and PBE1PBE) along with 18 basis sets have been applied to optimize the geometry of carbon disulfide (CS₂), and further calculate the vibrational frequencies of the optimized geometries. The differences between the calculated frequencies and corresponding experimental data are used to evaluate the efficiency of each combination of computational method and basis set. The comparison of frequency difference indicates that B3LYP generally gives the best prediction of frequencies for CS₂, whereas the other two density functional theory (DFT) methods, i.e., MPW1PW91 and PBE1PBE, often give parallel results. Although MP2 predicts the frequencies with accuracy almost as good as those from DFT methods, in a particular case, HF calculation outperforms MP2 as well as MPW1PW91 and PBE1PBE for prediction of the frequency of asymmetrical stretching for CS₂. © 2013 Wiley Periodicals, Inc.     

Reactivity of [CpCr(CO)3]2 towards thione (CS) moieties in some sulfur-containing substrates

The reaction of [CpCr(CO)₃]₂ (Cp = η⁵-C₅H₅) (1) with 1 mol equivalent of 2,5-dimercapto-1,3,4-thiadiazole (DMcTH₂) at ambient temperature led to the isolation of a reddish-brown crystalline solid of CpCr(CO)₃(η¹-DMcTH) (5) and a green solid of CpCr(CO)₃H (2) in yields of ca. 28% and 30%, respectively, along with some [CpCr(CO)₂]₂ (3) and [CpCr(CO)₂]₂S (4). The reaction of 1 with 1 mol equivalent of vinylene trithiocarbonate (SCS(CH)₂S) (VTTC) at 90 °C led to the isolation of a red crystalline solid of CpCr(CO)₂(η²-SCHSC₂H₂) (6) in ca. 15% yield while the reaction of 1 with isopropylxanthic disulfide ((CH₃)₂CHOCS₂)₂ resulted in the formation of CpCr(CO)₂(η²-S₂COCH(CH₃)₂) (8) in ca. 80% yield. The complexes 5, 6 and 8 have been determined by single crystal X-ray diffraction analysis.     

Unraveling gold(I)-specific action towards peptidic disulfide cleavage: a DFT investigation

Ground-state disulfide dissociation is a target of prime importance in structural biochemistry. A main difficulty consists in avoiding competition with carbon–sulfur and backbone scission pathways. In tandem mass spectrometry, such selectivity is afforded using transition elements or coinage-metal ions as catalyst. Yet, the underlying gas-phase mechanistic details remain poorly understood. Gold(I)-assisted disulfide cleavage is investigated by means of DFT calculations, to elucidate the highly selective and specific catalytic action of this transition-metal cation, a most promising one in tandem mass spectrometry. The preferential cleavage of sulfur–sulfur versus carbon–sulfur linkages on dimethyldisulfide, taken as a prototypical aliphatic compound, is rationalized on the basis of molecular orbital arguments. Secondly, it is revealed that the disulfide dissociation profile is dramatically impacted by a peptidic environment. Calculations on L,L-cystine derivatives show two main factors: the topological frustration for an embedded -CH(2)-S-S-CH(2)- motif induces a 5 kcal mol(-1) penalty, whereas electrophilic assistance via complexation of nitrogen and oxygen atoms lowers activation barriers by a factor of 3. S-S weakening is both thermodynamically and kinetically driven by the versatile coordination mode of gold(I). The influence of amine-terminus group protonation is finally sketched: it gives rise to an intermediate reactivity. This study sheds lights on the key action of the peptidic environment in tuning the dissociation profile in the presence of this transition-metal monocation.     

二硫化钼基复合材料的合成及光催化降解与产氢特性

随着环境污染和能源短缺的加剧,无污染环境修复技术及清洁能源替代工程已成为一项重要而紧迫的任务。作为层状结构的过渡金属硫化物,二硫化钼带隙较窄,边缘具有高的反应活性,容易与其他物质形成复合结构,是近年来光催化环境修复及清洁能源领域的研究热点。本文详细介绍了半导体二硫化钼及其复合物的合成方法和光催化降解与产氢行为,重点阐述了二硫化钼及其复合物的具体复合方式、光催化降解污染物活性、光催化产氢活性以及具体的降解与产氢机理等方面的内容,并举例说明。二硫化钼及其复合物在光催化降解污染物和光催化产氢方面具有绿色、廉价、高效等优点,在环境修复及清洁能源领域具有巨大的潜力和应用发展前景。     

碳掺杂六方氮化硼/二硫化钼吸附还原六价铬和助催化降解有机污染物

针对二硫化钼(MoS₂)因易团聚导致去除六价铬[Cr(Ⅵ)]容量低的问题, 利用六方氮化硼(BN)良好的吸附性和化学稳定性, 以多巴胺作为BN改性剂, 通过煅烧法和水热法制得碳掺杂六方氮化硼(c-BN)负载MoS₂纳米复合材料(c-BN@MoS₂). 研究了室温条件下c-BN@MoS₂对Cr(Ⅵ)的吸附还原和助催化降解有机污染物的性能. 实验结果表明, c-BN@MoS₂在40 min内对50 mg/L的Cr(Ⅵ)吸附还原去除率高达95%以上, 且以将 Cr(Ⅵ)还原至Cr(Ⅲ)为主, 在pH值为2、 温度为25 ℃条件下去除Cr(Ⅵ)最大容量可达401 mg/g, 显著高于 MoS₂(98 mg/g). 分析显示, c-BN不仅提高了MoS₂的平均孔径, 还可促进MoS₂生成金属特性的1T相, 有利于吸附Cr(Ⅵ)和加快氧化还原过程中的电子转移. 在Fe²⁺/PMS(过一硫酸氢盐)催化体系加入c-BN@MoS₂, 该体系对磺胺甲恶唑的降解性能明显增强, 其反应速率常数提高3倍, 这主要归因于c-BN@MoS₂明显加快了Fe³⁺到Fe²⁺的转变, 导致更多?OH产生, 达到增强降解污染物的目标.