在有机玻璃上射频溅射ITO组合薄膜

利用射频磁控溅射技术在有机玻璃表面上一次完成表面活化、ITO膜制备、SiO2 减反射膜制备过程。利用低能等离子体对有机玻璃表面进行改性以提高ITO膜的附着力。研究了氧分压等工艺参数对ITO膜导电性能及光学性能的影响。     

具有鲁棒性的矩形窄带滤光片的自动设计

分析了用于WDM光纤通信系统的全介质多腔窄带滤光片的膜系结构特点及其所必须具备的光学特性,提出了一种利用最优化方法的原理,通过计算机寻优来自动完成其膜系设计的方法;构造了合理的评价函数,编制了可自动搜索既满足设计目标、又具有鲁棒性的最优化膜系的计算机程序;使用本程序所设计出的多腔窄带滤光片具有较小的纹波系数和较好的矩形度,可满足WDM光纤通信系统对其分波/复波器的要求.     

Ultrathin silver‐coated gold nanoparticles as suitable substrate for surface‐enhanced Raman scattering

Surface‐enhanced Raman scattering (SERS) is an extremely powerful tool for the analysis of the composition of bimetallic nanoparticle (BNP) surfaces because of the different adsorption schemes adopted by several molecules on different metals, such as Au and Ag. The preparation of BNPs normally implies a change in the plasmonic properties of the core metal. However, for technological applications it could be interesting to synthesize core–shell structures preserving these original plasmonic properties. In this work, we present a facile method for coating colloidal gold nanoparticles (NPs) in solution with a very thin shell of silver. The resulting bimetallic Au@Ag system maintains the optical properties of gold but shows the chemical surface affinity of silver. The effectiveness of the coating method, as well as the progressive silver enrichment of the outermost part of the Au NPs, has been monitored through the SERS spectra of several species (chloride, luteolin, thiophenol and lucigenin), which show different behaviors on gold and silver surfaces. A growth mechanism of the Ag shell is proposed on the basis of the spectroscopic and microscopic data consisting in the formation and deposit of Ag clusters on the Au NP surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Effect of polyvinylpyrrolidone on the structure and laser damage resistance of sol–gel silica anti-reflective films

The effect of polyvinylpyrrolidone (PVP) on the structure and laser-induced damage threshold (LIDT) of sol–gel silica anti-reflective films is investigated. The results of dynamic light scattering, transmission electron microscopy, and small angle X-ray scattering, show that the PVP molecules surrounded the silica sol particles through the strong hydrogen bonds between Si-OH groups and the PVP. As a result, the growth of silica particles was restricted and thus the interface layer between the silica particles and the solvent become thickened with PVP content. Furthermore, the PVP reduced the porosity of the film, so the anti-reflection properties of the film were weakened. A multi-fractal analysis showed that the appropriate addition of PVP, 1 weight percent (wt%), could improve the surface fractal structure of the film, but that higher PVP content resulted in reduced surface uniformity. The addition of PVP lead to improved LIDT.     

热丝和射频等离子体化学气相沉积法制备定向碳纳米管薄膜

采用热丝和射频等离子体复合化学气相沉积设备(PE-HF-CVD),以CH4、H2和N2为反应气体.在较低衬底温度下(500℃),用简单的催化剂制备方法--旋涂法在硅片上涂覆Ni(NO3)2溶液,经热处理及H2还原后的Ni颗粒为催化剂,在硅衬底上制备出了垂直于硅片且定向生长的碳纳米管薄膜.扫描电子显微镜(SEM)和透射电子显微镜(TEM)结果显示,1 mol/l的硝酸镍溶液旋涂硅片所得催化剂制得的碳纳米管管径为30～50 nm,长度超过4μm,定向性好.并用拉曼光谱(Raman)对不同摩尔浓度Ni(NO3)2溶液条件下制备的碳纳米管薄膜样品进行了表征.     

分散剂PVA对水热反应制备LiFePO4性能的影响

应用改进的水热反应法制得粒径小且分布均匀的L iFePO4颗粒,煅烧时加葡萄糖形成包覆碳.XRD、SEM和充放电测试表明,该材料粒径约200 nm,颗粒的尺寸分布比较均匀,具有3.45 V的放电平台,放电容量最高达到140 mAh/g,循环到第40周容量仅衰减2.1%.详细讨论了如何有效调控L iFePO4的粒子尺寸以及包覆碳对其电化学性能的影响.     

低压供热涂层材料制备及热性能研究

低压供热技术具有安全系数高和节能降耗等优势,因而成为石化稠油长输管线、风力发电叶片冬季防覆冰和室内供暖等领域的研究热点之一。本文制备了一系列低压供热涂层材料,研究不同碳功能填料对涂层发热速率、发热功率及最高发热温度的影响规律,并揭示石墨烯和碳纤维对提升涂层材料热性能的协同作用。其中石墨烯纳米片的还原程度对材料热性能具有重要影响,降低其表面官能团密度对提升涂层供热特性具有促进作用,但是官能团密度过低会导致石墨烯纳米片的团聚现象,引起涂层发热不均匀。加入适量碳纤维可以提高石墨烯的均匀分散性,提升发热速率。优化石墨烯纳米片和碳纤维的比例后,采用24V电压驱动时,涂层材料的发热速率达到7.1℃·s^-1,功率密度为800W·m^-2,最高发热温度为124℃。     

Barrier Dispersion-Based Coatings Containing Natural and Paraffin Waxes

Petroleum, synthetic, and natural waxes have been used as hydrophobic bases for dispersions intended for use as barrier coatings for packaging paper. Oil-in-water dispersions with alkaline pH were prepared by a two-step homogenization procedure containing paraffin wax, with various characteristics, the Fischer–Tropsch synthesis product or beeswax. The size of the dispersed particles determined by dynamic light scattering depended on the type of hydrophobic base used and was in the range of 350–440 nm. The ability of dispersion particles in aggregation driven by electrostatic attraction, evaluated by Zeta potential analysis by electrophoretic light scattering, was from −26 to −50 mV. Static multiply light scattering was used for 30 days of stability assessment and helped to select the dispersion with a Sarawax SX70 wax base as the most stable. Dispersions were further used for coating the backing of kraft paper by the Meyer rod method. Coated paper with an applied coating of 6 g/m² had very good hydrophobic properties (Cobb60 < 4 g/m²), sufficient strength properties, and air permeation, which enabled its application as a packaging material. The dispersions based on Sarawax SX70 wax were evaluated as the best coating for Mondi ProVantage Kraftliner 125 g/m² backing paper. Good hydrophobic properties and strength properties indicate the possibility of using the SX70-based wax dispersion coating as a replacement for PFAS coatings in some applications.     

Triclosan‐based antibacterial paper reinforced with nano‐montmorillonite: a model nanocomposite for the development of new active packaging

In this study, a suitable method is reported to produce reinforced antibacterial paper packaging using the antimicrobial triclosan (TC) and organically modified montmorillonite (OMMT) as “model” compounds. Direct incorporation of TC at a concentration of 1 wt% and OMMT at concentrations of 1, 4, 7, and 10 wt% into papers was performed via coating process, and the resulting materials were characterized by in vitro antimicrobial assays, thermogravimetric analysis, scanning electron microscopy, mechanical tests, and water vapor transmission rate determinations. It was demonstrated that the presence of 1% TC in the coated papers exhibited inhibitory effects against Staphylococcus aureus and Escherichia coli. It was also pointed out that increases of approximately 30% in the tensile strength of commercial paper are obtained by using the OMMT at a concentration of 1 wt%. Water barrier property and thermal stability of paper were also enhanced because of the coating process and the incorporation of OMMT. The results from this study demonstrate that OMMT has a great potential to be incorporated into coating formulations to obtain antibacterial‐coated papers with improved properties for various packaging applications. Copyright © 2011 John Wiley & Sons, Ltd.     

Direct Monitoring of Thickness and Refractive Index of Optical Thin Film Deposited on Fiber End-face

We propose a system for depositing thin films on waveguides which enables low-temperature deposition and precise control of the refractive index and film thickness. It is composed of a conventional ion-beam sputtering (IBS) system and a new system for directly monitoring film characteristics during deposition. We controlled refractive indices over a wide range from 1.52 to 1.97 by moving the sputtering targets (SiO₂ and Si₃N₄) in the IBS system. The refractive index or film thickness was in-situ monitored by observing the optical power reflected from the end-face of a monitoring fiber set in the deposition chamber. Antireflection coating films were successfully deposited on a fiber end-face and a laser diode chip facet with low reflectivity from 0.05 to 0.07%. This deposition system is attractive for constructing highly functional optical devices for future photonic networks.