高能工业CT用新型X射线源焦斑测量

 为了获得较高的空间分辩率，设计了一种新型小束斑驻波电子直线加速器，该加速器取消了加速腔中的鼻锥结构，而在耦合腔中设置鼻锥结构。用狭缝法代替小孔法测得X射线源的焦斑尺寸为1.4mm。讨论了射线源焦点对成像质量的影响，分析了在高能条件下小孔法不适合用于焦点测量的物理原因，用4种测量方法测量了该高能X射线源的参数，测得该系统的成像极限分辩率为2.5 lp/mm，最后对实验结果进行了分析。     

The oblique chiral nematic phase in calamitic bimesogens

ABSTRACT

The discovery of the oblique chiral (or, the twist-bend, N_TB) nematic phase predicted for bent-core mesogens has engendered much interest due to its unique structure and physical properties, and the possibility of use in the next generation of fast electro-optic technology. Bimesogenic calamitic as well as bent-core mesogens are found to form the N_TB phase. Here, we report direct measurements of the temperature dependence of the conical tilt and the evidence of volcano-like orientational distribution of molecules in the N_TB phase. Optical and x-ray scattering investigations of two single-component calamitic bimesogens and their mixtures show that, while the Maier–Saupe orientational distribution function (ODF) is valid for the higher temperature nematic phase, a generalised expansion in terms of even Legendre functions is needed for the N_TB phase. Temperature dependence of the ODFs and the order parameters 〈P₂(cosβ)〉, 〈P₄(cosβ)〉, and 〈P₆(cosβ)〉 has been measured in both phases. The parameters 〈P₂(cosβ)〉 and 〈P₄(cosβ)〉 increase/decrease in the N/N_TB phase with decreasing temperature, while 〈P₆(cosβ)〉 remains vanishingly small for all samples. The value of 〈P₄(cosβ)〉 becomes negative in the N_TB phase confirming a conical distribution of molecules as they follow a helical trajectory keeping the local director tilted at an angle α wrt the macroscopic director. The heliconical tilt calculated from ODFs, exhibits a power law behaviour with temperature, vanishing at the transition to the N phase.     

Parameters Tied to Treewidth

Treewidth is a graph parameter of fundamental importance to algorithmic and structural graph theory. This article surveys several graph parameters tied to treewidth, including separation number, tangle number, well‐linked number, and Cartesian tree product number. We review many results in the literature showing these parameters are tied to treewidth. In a number of cases we also improve known bounds, provide simpler proofs, and show that the inequalities presented are tight.     

The polynomial reconstruction problem: The first 50 years

The problem of reconstructing the characteristic polynomial of a graph of order at least 3 from the collection of characteristic polynomials of its vertex-deleted subgraphs was posed by Cvetkovi? in 1973 as a spectral counter part to the well-known Ulam's reconstruction conjecture. Over the last 50 years, this problem has received notable attention, many positive results have been obtained, but in the general case the problem is still unresolved. In particular, no counter example is found in literature. In this expository paper we survey classical and some more recent results concerning the polynomial reconstruction problem, discuss some related problems, variations and generalizations.     

Some Aspects of Magnetic Filtration Theory for Removal of Fine Particles from Aqueous Suspensions

The magnetic filtration theory was evaluated to intensify the filtration of industrial fluids by magnetic filters. Effects of filtration velocity and external magnetic field intensity on filter performance were investigated and the dependence of the logarithmic efficiency coefficient on filtration velocity was questioned. It was concluded that change in the magnetic susceptibility of the dispersion particles, caused by external magnetic field, and change in the flow rate properties of the liquid alongside the filter pores are the most essential factors to be considered in the design, development, and modeling of magnetic filtration systems in various industrial areas.     

Experimental study and numerical modeling of brittle fracture of carbonate rock under uniaxial compression

The brittle carbonate rock taken from the Tarim Oilfield is tested in laboratory under uniaxial compression. The acoustic emission (AE) is used to monitor the microcracking activity in rock during the experiment. Moreover, the 3D tomograms of carbonate rock after uniaxial compression are obtained by using CT imaging technology, which indicates that microcracks mutually interconnect and eventually form macroscopic fractures after failure. The PFC2D is used to model the behavior of brittle rock including microcracks propagation. The stress–strain curve and cracks distribution in rock model are obtained from the PFC simulation. The numerical results agree with the experimental test well.     

Influences of aerodynamic loads on hunting stability of high-speed railway vehicles and parameter studies

The influences of steady aerodynamic loads on hunting stability of high-speed railway vehicles were investigated in this study.A mechanism is suggested to explain the change of hunting behavior due to actions of aerodynamic loads：the aerodynamic loads can change the position of vehicle system（consequently the contact relations）,the wheel/rail normal contact forces,the gravitational restoring forces/moments and the creep forces/moments.A mathematical model for hunting stability incorporating such influences was developed.A computer program capable of incorporating the effects of aerodynamic loads based on the model was written,and the critical speeds were calculated using this program.The dependences of linear and nonlinear critical speeds on suspension parameters considering aerodynamic loads were analyzed by using the orthogonal test method,the results were also compared with the situations without aerodynamic loads.It is shown that the most dominant factors a ff ecting linear and nonlinear critical speeds are different whether the aerodynamic loads considered or not.The damping of yaw damper is the most dominant influencing factor for linear critical speeds,while the damping of lateral damper is most dominant for nonlinear ones.When the influences of aerodynamic loads are considered,the linear critical speeds decrease with the rise of cross wind velocity,whereas it is not the case for the nonlinear critical speeds.The variation trends of critical speeds with suspension parameters can be significantly changed by aerodynamic loads.Combined actions of aerodynamic loads and suspension parameters also a ff ect the critical speeds.The effects of such joint action are more obvious for nonlinear critical speeds.     

Synthesis and thermodynamic studies of the dinuclear adducts between dimethyltin(IV) dichloride with SalenH2 and MII(Salen) complexes in chloroform

A UV-Vis spectrophotometric study of adduct formation of SalenH₂ (1) and M^II(Salen), where M?=?Mn (2), Fe (3), Co (4), Ni (5) and Cu (6) as donors with Me₂SnCl₂ as acceptor have been investigated in chloroform. Adducts (1a–6a) have been characterized by ¹H, ¹³C and ¹¹⁹Sn NMR, IR and electronic spectroscopy and microanalysis. Formation constants and thermodynamic parameters were measured for 1 : 1 and 2 : 1 adducts at various temperatures (T?=?278 to 308 K). The data refinement was carried out with the SQUAD 84 program. The trend of formation constants of M^II(Salen) complexes with Me₂SnCl₂ follows the order: Mn>Fe>Cu>Co>Ni. The formation constants for the free 1 and M^II(Salen) with Me₂SnCl₂ changes according to the following trend: M^II(Salen)>SalenH₂     

Polymer complexes. LXX. Synthesis,spectroscopic studies,thermal properties and antimicrobial activity of metal(II) polymer complexes

The monomer 3‐allyl‐5‐(phenylazo)‐2‐thioxothiazolidine‐4‐one (HL) was prepared by the reaction of allyl rhodanine with aniline through diazo‐coupling reaction. Reaction of HL with Ni(II) or Co(II) salts gave polymer complexes ( 1 – 8 ) with general stoichiometries [M(HL)(Cl)₂(OH₂)₂]_n, [M(HL)(O₂SO₂)(OH₂)₂]_n, [M(L)(O₂NO)(H₂O)₂]_n and [M(L)(O₂CCH₃)(H₂O)₂]_n (where M = Ni(II) or Co(II)). The structures of the polymer complexes were identified using elemental analysis, infrared and electronic spectra, molar conductance, magnetic susceptibility, X‐ray diffraction and thermogravimetric analysis. The interaction between the polymer complexes and calf thymus DNA showed a hypochromism effect. HL and its polymer complexes were tested against bacterial and fungal species. Co(II) polymer complex 2 is the most effective against Klebsiella pneumoniae and is more active than penicillin. The results showed that Ni(II) polymer complex 5 is a good antibacterial agent against Staphylococcus aureus and Pseudomonas aeruginosa. Molecular docking was used to predict the binding between the monomer with the receptors of prostate cancer (PDB code: 2Q7L Hormone) and breast cancer (PDB code: 1JNX Gene regulation). Coats–Redfern and Horowitz–Metzger methods were applied for calculating the thermodynamic parameters of HL and its polymer complexes. The thermal activation energy of decomposition for HL is higher than that for the polymer complexes.     

Higher-order time integration with a local Lax–Wendroff procedure for a central scheme on an overlapping grid

We have implemented a high-order Lax–Wendroff type time integration for a central scheme on an overlapping grid for conservation law problems. Using a local iterative approach presented by Dumbser et al. (JCP, 2008) [12], we extend a local high-order spatial reconstruction on each cell to a local higher-order space–time polynomial on the cell. We rewrite the central scheme in a fully discrete form to avoid volume integration in the space–time domain. The fluxes at cell interfaces are calculated directly via integrating a higher-order space–time reconstruction of the flux. We compare this approach with the corresponding multi-stage Runge–Kutta time integration (RK). Numerical results show that the new time integration is more cost-effective.