反应条件对煤加氢热解产物分布的影响

本文以内蒙古红庙煤为研究对象，在温度４５０－６５０℃和氢氯压力２－５ＭＰＡ的范围内，在加压固定床反应器上考察了各种因素包括传质作用对煤加氢热解产物分布的影响。研究表明，转化率和焦油收率随最终反应温度，氢气压力和流速的升高而升高，随加速速率的增大而降低。     

Polarographic Behaviour and Determination of Kinetic Parameters of Lead-Pamoate Complex in Dimethyl Sulfoxide

The polarography of lead ion in dimethyl sulfoxide (DMSO) was investigated in the DMSO concentration range 0–80 vol.%. The complex species identified were Pb₂(DMSO)⁴⁺₃, Pb(DMSO)²⁺₃ and Pb(DMSO)²⁺₆ in [DMSO]<10 vol.%, 10< [DMSO]<43 vol.% and [DMSO]>43 vol.%, respectively. In the presence of pamoic acid, the reduction of lead ion in DMSO was two-electron reversible diffusion-controlled at pH≤6.0, but it became irreversible at pH>6.0. The complex species identified was Pb(D_m)₂(P_m)₃(OH)^6? at pH>6.0. The rate constants of electro-reduction and electro-oxidation, activation energies were determined. The hydrolysis constants of lead ion in dimethyl sulfoxide concentration 40–70 vol.% at pH 4.5–6.0 were found to be of the order of 10^?6. The stability constants of the Pb(DMSO)²⁺₃ and Pb(DMSO)²⁺₀ were also determined to be of the orders of 10¹ and 10⁵, respectively.     

Fourier transform Raman spectral measurements of powdered quaternary mixtures of organic compounds: Exceptional pure component spectral reconstruction using band-target entropy minimization (BTEM)

Fourier transform Raman spectra of eight mixtures of four organic solids, namely dicyandiamide, melamine, acetamide and urea were measured. Matrices formed from these spectra were first subjected to singular value decomposition to obtain the right singular vectors. The right singular vectors were then subjected to blind source separation using band-target entropy minimization (BTEM), thus no a priori information (i.e. involving the nature of the components present, their spectra, nor their concentrations) was included in the analysis. The recovered pure component spectra are of exceptionally high quality and are consistent with pure reference spectra. Various empirical and statistical tests, such as the Euclidean norm and target transform factor analysis, were employed to assess the quality of the recovered spectra. The present results indicate the applicability of combined Raman and BTEM analysis for solid mixtures.     

Charge transfer complexes and salts of ionenes

A review of the synthesis and properties of ionenes is presented. Particular attention is paid to the electrical and related properties of conductive teteracyano-p-quinodimethane (TCNQ) complex salts of ionenes containing ammonium or sulfonium groups in the main chain and to their chemical stability. The recent work on preparation of such ionenes with inorganic and organic counterions which show interesting linear and nonlinear optical properties is also discussed. It is shown that in the solid state ionenes act as a kind of a matrix fixing, in a chemically controlled way, positions and distribution of different kinds of counterions. Because the reaction of counterion exchange is easy in the case of ionenes it provides a convenient way to prepare a broad class of polyelectrolytes with many different properties.     

Calorimetric study of thermodynamics of production of polybutene-1, polypentene-1, 4-methylpentene-1 and properties of reagents between 0 and 670 K

The heat capacitiesC ₀ ^p of polybutene-1, polypentene-1, poly-4-methylpentene-1 and 4-methylphentene-1 were studied calorimetrically from 6 to (500–700) K. Temperatures, enthalpies of melting of various crystalline forms and the parameters of the glass transition were determined. The thermodynamic functionsH ⁰(T)?H⁰(0), S⁰(T) andG ⁰(T)?H⁰ (0) were calculated between 0 K and (500–700) K. From the calorimetric values obtained and literature data, the thermodynamic characteristics of the following processes were estimated for the corresponding alkenes-1, andcis-andtrans-alkenes-2: the polymerization of alkenes-1, the monomer-isomerization polymerization ofcis- andtrans-alkenes-2 to polyaklenes-1 and the isomerization ofcis- andtrans-aklenes-2 to alkenes-1 in the same temperature interval at standard pressure.     

Study of Densities, Viscosities and Ultrasonic Speeds of Binary Mixtures Containing 1,2-Dimethoxyethane and an Alkan-l-ol at 298.15 K

The viscosity deviation (Δη), the excess molar volume (V ^E) and the ultrasonic speed (u) have been investigated from viscosity (η) and density (ρ ) measurements of binary liquid mixtures of 1,2-dimethyoxyethane with methanol, ethanol, propan-1-ol, butan-1-ol, pentan-1-ol, hexan-1-ol or octan-1-ol over the entire range of composition at 298.15 K. The excess volumes are negative over the entire range of composition for all of the mixtures with the exception of hexan-1-ol and octan-1-ol. The excess isentropic compressibilities (K _S ^E) and viscosity deviations are negative for all of the mixtures. The magnitudes of the negative values of V ^E decrease with the number of carbon atoms of the alkan-1-ol. The trend of increasing K _S ^E values with the chain length of the alkanol is similar to that observed in the case of V ^E. Graphs of V ^E, Δ η, K _S ^E, Δ u, L _f ^E and Z ^E against composition are presented as a basis for a qualitative discussion of the results.     

Thermodynamic parameters ΔΔH and ΔΔS as probes for the transition state in the reaction of N-phenyltriazolinedione with alkenes in nucleophilic solvents

The thermodynamic parameters, ΔΔH^# and ΔΔS^#, were determined for the interception of an intermediate, with the structural characteristics of an aziridinium imide, by nucleophilic solvents during the reaction of 2-methyl-2-butene with N-phenyltriazolinedione. The experimentally measured parameters were found to be in favor of an S_N2-‘like’ transition state and showed strong dependence on the bulkiness of the incoming molecule of the nucleophile-solvent.     

Influence of molecular weight on the thermal decomposition of hydroxyl terminated polybutadiene

Thermogravimetric analysis of hydroxyl terminated polybutadiene (HTPB) and its fractions of different molecular weights separated by preparative GPC shows two major stages of weight loss of different nature in a nitrogen atmosphere. The first stage is primarily depolymerisation, cyclisation and crosslinking of molecules and the second stage is mainly the decomposition of the residue from the first stage. The kinetic parameters, viz. activation energy E and pre-exponential factor A using four different non-isothermal integral equations show a systematic increase with increase in molecular weight for the first stage, whereas for the second stage, the effect of molecular weight on E and A values is not prominent. The increase in E and A values for the first stage is attributed to the formation of greater number of cyclised and crosslinked products from molecules of higher dimensions. Quantitative correlations between the kinetic constants and the molecular weight parameters were derived for the first stage as a quadratic curve following the equation: E or ln A = K₁ − K₂/M (where K₁ and K₂ are empirical constants whose values are different for the different molecular weight averages, viz. M_n, M_w and M_z and for the different equations).     

Study of geometrical parameters in N-H...N type of hydrogen bonds

Geometrical parameters associated with N-H ... N types of hydrogen bonds have been analysed using crystal structure data on nucleic acids, amino acids and related compounds. Histograms depicting the frequency distribution of N-H ... N length (l) and H-N ... N angle (θ) have been drawn and conclusions on the favoured geometry of such bonds have been arrived at. The distribution ofl shows a pronounced maximum in the range between 2.9? and 3.0? with an overall average of 2.98 ?. The θ distribution shows a pronounced maximum for the hydrogen bond angle in the range 0°-10°, with a rapid fall-off in frequency for nonlinear hydrogen bonds. The frequency shows a cos⁶θ dependence as compared to cos²θ dependence term used earlier to predict the angular dependence of hydrogen bond potential energy in proteins and polypeptides.     

CT联合血清HCY、β2-M在下肢动脉狭窄闭塞性疾病中的诊断价值

本文对CT联合血清同型半胱氨酸（HCY）、β2-微球蛋白（β2-M）在下肢动脉狭窄闭塞性疾病中的诊断价值进行分析。选取上海市金山区中西医结合医院收治的120例疑似下肢动脉狭窄闭塞性疾病患者进行研究，选取同期健康体检者120例作为对照组，对患者进行CT检查、血清HCY和β2-M水平检查，并比较了CT诊断下肢动脉狭窄闭塞情况、两组患者血清HCY和β2-M水平，以明确CT、HCY、β2-M诊断价值及误诊率、漏诊率。结果显示，120例疑似患者中，CT检测出646节段病变血管，其中轻度狭窄155节段，中度狭窄257节段，重度狭窄143节段，血管完全闭塞91节段；研究组患者血清HCY、β2-M水平明显高于对照组，两组比较差异有统计学意义（P<0.05）；HCY的AUC为0.863，截断值>21.75（μmol/L），诊断敏感性为79.00%，特异性为80.00%，β2-M的AUC为0.837，截断值>2.98（μmol/mL），诊断敏感性为75.25%，特异性为65.21%；CT诊断阳性率为67.50%，HCY诊断阳性率为69.17%，β2-M诊断阳性率为67.50%，三者联合诊断阳性率为82.50%，联合诊断阳性率高于CT、HCY、β2-M单独诊断阳性率（P<0.05）；CT、HCY、β2-M单一检测对下肢动脉狭窄闭塞性疾病均有较高灵敏度、特异性及准确度，但三者联合诊断灵敏度、特异性及准确度最高，误诊率、漏诊率最低。本文证实了采用CT联合血清HCY、β2-M诊断下肢动脉狭窄闭塞性疾病诊断灵敏度、特异性及准确度高，误诊率、漏诊率低。