DSC法研究液晶物质2-(4-烷氧苯基)6-取代苯并噻唑的相变热性质

The phase transitions of a new group of mesogens, 2-(4-alkoxyphenyl)-6-substituted benzothiazoles were thermodynamically studied by DSC, and their transition temperatures and enthalpy changes were measured, from which the transition entropy changes were calculated. The results obtained were discussed. In addition, the phe-nomenon of super-cooling of the compounds were quantitatively observed.     

MM3 parametrization of four‐ and five‐coordinated rhenium complexes by a genetic algorithm—Which factors influence the optimization performance?

Genetic algorithms (GA) were used to solve one of the multidimensional problems in computational chemistry, the optimization of force field parameters. The correlation between the composition of the GA, its parameters (p(c), p(m)) and the quality of the results were investigated. The composition was studied for all combinations of a Simple GA/Steady State GA with a Roulette Wheel/Tournament Selector using different values each for crossover (0.5, 0.7, 0.9) and mutation rates (0.01, 0.02, 0.05, 0.10, 0.20). The results show that the performance is strongly dependent on the GA scheme, where the Simple GA/Tournament Selector yields the best results. Two new MM3 parameters were introduced for rhenium compounds with coordination number four (204) and coordination number five (205), the formal oxidation states of rhenium ranging from +V to +VII. A manifold of parameters (Re-C, N, O, S) was obtained by using a diverse set of CSD structures. The advantage of the GA vs. UFF calculations is shown by comparison of several examples. The GA optimized parameters were able to reproduce the geometrical data of the X-ray structures.     

Component reconstruction in the primary space of spectra and concentrations. Alternating regression and related direct methods

A set of methods that extract the spectral components in a chromatographic run is considered. The methods do not need libraries of previously known spectra or retention times. The methods have been developed for two-dimensional spectra but they can also be used for chromatographic analyses with a single-channel detector. The methods are direct; they do not use principal components as the starting point. Alternating regression (AR) remains in the primary space of spectra and concentrations during the calculations. Random numbers are used as the starting spectra. Regression is used to solve first for the concentrations, then for the spectra. The method uses two kinds of constraints: all spectra and concentrations are forced to be positive; and all concentration profiles are forced to a unimodal shape with a single local maximum. It is assumed that all observations are a linear sum of components. Compact alternating regression (CAR) is a new variant of the basic AR. The idea is to replace multiplication of a large matrix by two multiplications of smaller matrices. This typically speeds up the iterations by a factor of ten. AR and CAR have been successfully used with combined techniques such as gas chromatography—mass spectrometry and liquid chromatography with UV—visible detection. The reliability of the solution is checked by repeatedly injecting noise and performing the analysis several times. This produces estimates of confidence intervals. AR and CAR have recently been extended to handle single-dimensional signals. Examples are single-channel detectors such as the flame ionization detector in gas or liquid chromatography with a fixed-wavelength UV detector. A batch of samples is used as the observation matrix. As a result, one obtains both the concentrations and the elution shapes of individual chromatographic peaks.     

Thermodynamics of mixed electrolyte solutions. XI. An isopiestic study of the quaternary system NaCl−KCl−CaCl2−H2O at 25°C

Osmotic and activity coefficients in the aqueous quaternary system sodium chloride-potassium chloride-calcium chloride were derived from isopiestic measurements at 25°C. The isopiestic data were treated by the various procedures of Scatchard, Friedman, and Reilly, Wood, and Robinson. The results obtained showed good agreement with those obtained by pseudo-ternary transforms. Interaction parameters obtained indicated the preponderance of pairwise interactions. Excess Gibbs free energies of mixing were calculated.     

The application of the concept of reaction layer to the study of electrode processes coupled with the second-order chemical reactions at microelectrodes under steady-state conditions

Under steady-state conditions, the current equations of the second-order EC, ECE and DISPI reactions at microdisk, microspherical and microring electrodes are derived with the aid of the concept of the reaction layer. The conditions under which these equations would be valid are also discussed. Using these equations, methods to determine the kinetic parameters for the second-order EC, ECE and DISPI reactions are presented. The reduction of 2,6-diphenyl-pyrylium cation and oxidation of triphenylamine were investigated as examples of the second-order EC and ECE reactions.     

Ab initio calculation of 4-ClC6H4CH2Cl and peculiarities of electron density distribution in this molecule

Ab initio calculation of the 4-ClC₆H₄CH₂Cl molecule was performed by the restricted Hartree-Fock method in the split valence 6–31 G* basis set with complete optimization of its geometry. Populations of p-orbitals of atoms of this molecule were analyzed.³⁵Cl NQR frequencies and asymmetry parameters of the electric field gradient on³⁵Cl nuclei were estimated on the basis of the populations of valent p-orbitals of CI atoms and their components. Good conformity with the experimental values was obtained when only less diffuse components of p-orbitals were used in calculations of populations.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 823–826, April, 1996.     

Segregation of Sn in the binary CuSn and ternary CuSnSb alloy systems

Progression studies have been followed from Cu(111)‐ and Cu(100)Sn binaries to Cu(111)‐ and Cu(100)SnSb ternary‐alloy systems under the same experimental conditions. The segregation behaviour of Sn in the two orientations are explained. It is found that the kinetic segregation profiles of Sn in the ternary alloys shift to lower temperatures as compared to that in the binary. The Sn profile shift is mainly due to the decrease in the activation energy of Sn in the ternary systems. For a particular Cu orientation, the other segregation parameters that the Sn profiles depend on, like the pre‐exponential factor, segregation energy and the interaction coefficient, are found to be the same in the two systems. There is also a change in the equilibrium segregation profiles of Sn. In the ternary system, site competition between Sn and Sb causes the Sn to suffer exponential desegregation and eventual displacement from the surface. Copyright © 2006 John Wiley & Sons, Ltd.     

Investigation of solution and solid-state properties of poly(R,R,4,4-cyclohexylidene diphenylene diphenyl-4,4-disulfonate)

Solution and solid-state properties of poly(R,R^′,4,4^′-cyclohexylidene diphenylene diphenyl-4,4^′-disulfonate) (PS-6: R=R^′=H; PS-7: R=CH₃, R^′=H; PS-8: R=R^′=Cl; PS-9: R=CH₃, R^′=Cl and PS-10: R=R^′=Br) have been determined and discussed in terms of nature of the substituents. Ultrasonic velocity (2 MHz) and acoustical parameters of PS-7 and PS-9 solutions in chloroform, 1,2-dichloroethane and tetrahydrofuran (THF) at 30, 35 and 40 °C have been evaluated to understand the effect of methyl and chlorine groups, concentration, and temperature on molecular interactions. The data are interpreted in light of solvent-polymer and polymer-polymer interactions. Predominant solvation is observed in THF system and the least in chloroform system at all three temperatures. The structural change is observed above 2%. Both the polymers possess structure-forming tendency and it is supported by positive values of S_n.The densities of PS-7 and PS-9 determined by floatation method are in excellent agreement with calculated values but those determined by specific volume method differ remarkably from calculated values due to solvation effect. PS-7 and PS-9 possess respectively tensile strength of 38.4 and 1.1 N/mm²; electric strength of 16.2 and 25.0 kV/mm and volume resistivity of 5.7×10¹⁶ and 1.0×1017Ωcm. The low tensile strength of PS-9 is due to low molecular weight, rigid and brittle nature of the polymer chains. PS-6 to PS-9 are thermally stable up to about 349-379 °C while PS-10 up to about 279 °C and involved two-step degradation. DTA thermograms indicated T_g at about 204-226 °C. High activation energy indicated rigid nature of the polymer chains and the positive magnitudes of ΔS* indicated less ordered transition state. The nature of the substituents (CH₃, Cl and Br) affected thermal, mechanical and electrical properties.     

Molecular parameters and retention characteristics of unsubstituted polyaromatic hydrocarbons in HPLC

Summary The present research studies the possibility of using the correlation dependence between molecular parameters of unsubstituted polyaromatic hydrocarbons (PAH) and their retention in reversed-phase liquid chromatography to optimize the conditions for the separation and identification of unknown peaks on the chromatograms of multicomponent mixtures. A linear correlation equation, that takes the number and environment of the carbon atom in the PAH molecule into account as well as the differences in the specific interactions of isomeric molecules with polar eluent, has been proposed. The adequacy of the proposed PAH retention model was verified by comparing the calculated retention values with the experimental data. The possibility of identifying unsubstituted PAH according to the number of carbon atoms of various types and according to the values of the molecules lengths (calculated on the basis of the retention of these substances under different eluent compositions) was exemplified by various chromatographic systems (reversed phase-eluent-PAH molecules).     

Linear free energy relationship of the energy of the CTTS transition of Halide ions with the solvatochromic parameter α

A linear free energy relationship was found betweenv _max, the energy of the absorption maximum of chloride, bromide, or iodide ion in various solvents, and the solvatochromic parameter which is a measure of the hydrogen bond donor ability of the solvent. The relationships are: for chloride,v _max=6.99+50.16 kK; for bromide,v _max=5.52+45.20 kK; for iodide,v _max=5.02+40.33 kK. The correlation ofv _max for iodide ion with gave a larger correlation coefficient and smaller standard deviation than a correlation with the E _T (30) parameter of Dimroth. From the values ofv _max for iodide ion and the solvated electron in liquid ammonia at 25°C, these correlations indicate a preliminary value of 0.00 for the parameter of liquid ammonia. This had not been reported before and is lower than expected from a general knowledge of the physical and chemical properties of liquid ammonia but is consistent with a more detailed consideration and recent gas phase measurements of hydrogen bond donor strength.