Physicochemical compatibility of SrCeO3 with potential SOFC cathodes

The chemical and physical compatibility of SrCeO₃ is investigated with respect to LaMO₃ (M=Mn, Fe, Co) and La_2−xSr_xNiO₄ (x=0, 0.8), via the reaction of fine-grained powder compacts and solid-state diffusion couples. Compositions were chosen so as to give predictive insight into possible candidate materials for all-oxide electrochemical devices. Results show the primary reaction in these systems to be the dissolution of SrO from SrCeO₃ into the LaMO₃/La_2−xSr_xNiO₄, and corresponding formation of La-doped CeO₂. Reaction kinetics are observed to be relatively fast, with element profiles suggesting the diffusion of Sr²⁺ in ceria to be surprisingly rapid. It is demonstrated that perovskite starting materials represent poor candidates for use with SrCeO₃, reacting completely to form Ruddlesden-Popper/K₂NiF₄ type oxides. Reaction with La₂NiO₄ is less pronounced, and formation of secondary phases suppressed for the composition La_1.2Sr_0.8NiO₄. It is thus concluded that Ruddlesden-Popper type oxides represent good candidate materials for use with a SrCeO₃-based electrolytes when doped with appropriate levels of Sr.     

Group 6 tetracarbonyl complexes of N-[(2-pyridyl)methyliden]-α (or β)-aminonaphthalene: Spectral characterization,electrochemistry, solvatochromism and photophysical studies

A new series of group 6 carbonyl complexes of N-[(2-pyridyl)methyliden]-α (or β)-aminonaphthalene (α/β-NaiPy) are described in this work. The complexes are formulated as cis-[M(CO)₄(α/β-NaiPy)] by elemental, mass and other spectroscopic data. The complexes show emission spectra at room temperature and their quantum yield lies between 0.4 and 0.5. All the complexes exhibit negative solvatochromism. Cyclic voltammetry shows metal centred oxidation and ligand reductions.     

Development of direct fluorination technology for application to materials for lithium battery

Direct fluorination of 1,3-dioxolan-2-one with elemental fluorine was successfully carried out to provide 4-fluoro-1,3-dioxolan-2-one, which was expected as an additive for lithium ion secondary battery. 4-Fluoro-1,3-dioxolan-2-one was also further fluorinated with elemental fluorine to give three isomers of difluoro derivatives by the same methodology. Another topic is the preparation of trifluoromethanesulfonyl fluoride, an intermediate of lithium battery electrolyte, by the reaction of methanesulfonyl fluoride with elemental fluorine. The use of perfluoro-2-methylpentane as a solvent gave satisfactory selectivity of trifluoromethanesulfonyl fluoride.     

A Large-Area Patterned TiO2/SnO2 Bilayer Type Photocatalyst Prepared by Gravure Printing

Anatase TiO₂ films (thickness = 50 nm) were formed in shape of stripes (width = 1.6 mm, interval = 0.4 mm) by gravure printing on commercially available SnO₂ coated soda-lime glass substrates (dimension = 300 × 300 mm). Its photocatalytic activity was examined for the gas-phase oxidation of CH₃CHO in comparison with a simple TiO₂ photocatalyst formed on a silica glass. The patterned TiO₂/SnO₂ bilayer type photocatalyst showed a high photocatalytic activity in an H₂O bearing atmosphere. On the other hand, neither the patterning nor stacking effect was observed for the same reaction under dry conditions. These results could be explained in terms of the reducing potential of the electrons in the conduction band of the SnO₂ layer.     

Rapid Synthesis of Nanocrystalline TiO2/SnO2 Binary Oxides and Their Photoinduced Decomposition of Methyl Orange

A rapid and simple method, the so-called stearic acid method (SAM) was developed to prepare nanostructured TiO₂/SnO₂ binary oxides by combustion of stearic acid precursors. The preparative process was studied by Fourier transform infrared spectroscopy (FT-IR). During the preparative process, metal precursors were dispersed in stearic acid at molecular level. Microstructure of the samples was investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), BET specific surface area measurement and the results were compared with those obtained by conventional sol-gel method. The photocatalytic decomposition of methyl orange was used as a model system to determine the relative influences of the preparation method and the concentration of SnO₂ on the photocatalytic activities. It was found that preparative methods affected the crystalline structure of TiO₂/SnO₂ powders and the anatase phase of TiO₂ was stabilized by the addition of SnO₂ in SAM. The samples prepared by SAM showed better dispersity, larger specific surface area and the TiO₂/SnO₂ (r=0.15, SAM) catalyst showed higher photocatalytic activity than Degussa P25.     

Møller-Plesset (MP2) perturbation theory for large molecules

Summary A novel formulation of MP2 theory is presented which starts from the Laplace transform MP2 ansatz, and subsequently moves from a molecular orbital (MO) representation to an atomic orbital (AO) representation. Consequently, the new formulation is denoted AO-MP2. As in traditional MP2 approaches electron repulsion integrals still need to be transformed. Strict bounds on the individual MP2 energy contribution of each intermediate four-index quantity allow to screen off numerically insignificant integrals with a single threshold parameter. Implicit in our formulation is a bound to two-particle density matrix elements. For small molecules the computational cost for AO-MP2 calculations is about a factor of 100 higher than for traditional MO-based approaches, but due to screening the computational effort in larger systems will only grow with the fourth power of the size of the system (or less) as is demonstrated both in theory and in application. MP2 calculations on (non-metallic) crystalline systems seem to be a feasible extension of the Laplace transform approach. In large molecules the AO-MP2 ansatz allows massively parallel MP2 calculations without input/output of four-index quantities provided that each processor has in-core memory for a limited number of two-index quantities. Energy gradient formulas for the AO-MP2 approach are derived.Dedicated to Prof. W. Kutzelnigg whose books on theoretical chemistry aroused my interest in this field     

4,6—二取代—3—酮—5硫酮—1,2,4—三嗪类化合物的质谱研究

1,2,4-三嗪类化合物具有抗癌、抗病毒、杀虫、抑制中枢神经系统等多种作用。前文用苯甲酰基硫代甲酰胺直接与氨基脲反应,制备了8种新的4,6-二取代-3-酮-5-硫酮-1,2,4-三嗪类化合物(a—h),本文测定了其电子轰击质谱、高分辨质谱及联动扫描质谱,以了解其质谱裂解途径。     

停止-流动分光光度法研究铕(II)与二甲酚橙快速电子转移反应动力学

用停止-流动分光光度法研究了Eu~(2+)与二甲酚橙(XO)间快速电子转移反应的动力学规律。求得了速控步骤的动力学参数。如反应级数(n=2)、几个不同温度下的速率常数(k_(278 K)=5.7×10~8 L·mol~-·s~(-1), k_(s38 K)=1.01×10~9 L·mol~(-1)·s~(-1))、活化能(E=7.6×10~3 J·mol~(-1)), 以及指前因子(A=1.5×10~(10) L·mol~(-1)·s~(-1)), 并判断出其为溶液中扩散控制型反应。根据实验现象与测试结果, 提出了Eu~(2+)与XO的反应分别在Eu~(2+)相对过量和在XO过量时的反应机理, 并判断了各反应步骤速率常数之间的相对关系。     

A quantum scattering study of collinear state-testate reaction probabilities for the F + H2(v) → HF(v') + H system

A new quantum scattering approach (linear combination of arrangement channels-scattering wavefunction, LCAC-SW) proposed by Deng and his co-workers is used to calculate collinear state-to-state reaction probabilities for the F + H₂(v) → HF(v') + H system. Several interesting problems such M threshold energy, compound states and enhance by translational energy of the reactants and the vibration excitation of products are discussed and they are compared with other theoretical investigations reported in the literature. It is shown that the LCAC-SW approach is the successful one of quantum scattering methods.     

N-取代吩噻嗪和DDQ的电荷转移络合作用

具有盼嘤酸化学结构的化合物有广泛的用途I‘－＼其中吩嘤埃衍生物在医学上用作抗精神病药物特别受到药理学家们的注意，发现其药理作用与其分子提供电子的能力有关卜‘」但是我们应该注意到，作为抗精神病药物的吩嚷嚷衍生物，其吩座爆分子的氮原子都连有一个叔胺基链问，例如氯丙障（I）和奋乃静（11）．而我们知道，胺类特别是叔胺类有强的提供电子的能力＊；在上述的药物分子中是主要的提供电子因素，因此以这类化合物作为给体研究其供电子能力，是不能实际反映吩嘤嗓分子本身的给电子能力的．吩嘤噪类属于二苯并杂环化合物，分子中既…