Reactions of the Ru3(CO)10(μ-Ph2PCH2PPh2) cluster with enynes RCH=CHC≡CR (R is phenyl or ferrocenyl). Formation of indenone derivatives of triruthenium clusters

The thermal reaction of Ru₃(CO)₁₀(-Ph₂PCH₂PPh₂) (1) with enyne PhCH=CHCCPh afforded the trinuclear ruthenium clusters Ru₃(CO)₆{₃-P(Ph)CH₂PPh₂}{₃-C(Ph)=CHCC(Ph)(1,2-C₆H₄)C(=0)} (2), Ru₃(-H)(CO)₅{₃-P(Ph)CH₂PPh₂}{₃-C(Ph)=CHCC(Ph)(1,2-C₆H₄)C(—0)} (3), and Ru₃(CO)₆(-CO){₃-P(Ph)CH₂PPh₂}{₃-C(C=CPh₂)CH=C(H)Ph} (4) and also two isomers of Ru₃(CO)₅(-CO)(-Ph₂PCH₂PPh₂){₃-C₄Ph₂(CH=CHPh)₂} (5a and 5b). Clusters 2, 3, and 4 were characterized by IR spectroscopy, ¹H and ³¹P NMR spectroscopy, and X-ray diffraction analysis. The reaction of complex 1 with enyne FcCH=CHCCFc gave rise to the Ru₃(CO)₆{₃-P(Ph)CH₂PPh₂}{₃-C(Fc)=CHCC(Fc)(1,2-C₆H₄)C(=0)} (6) and Ru₃(-H)(CO)₅{₃-P(Ph)CH₂PPh₂}{₃-C(Fc)=CHCC(Fc)(1,2-C₆H₄)C(—0)} (7) clusters. According to the spectral data, the latter compounds are isostructural to complexes 2 and 3, respectively.     

FTIR study of CO adsorption on molybdena-alumina catalysts for surface characterization

CO adsorption at low temperature has been used to probe Lewis acid sites created upon dehydroxylation of γ-Al₂O₃ and reduction of Mo/Al₂O₃ catalysts, using Fourier Transform Infrared spectroscopy (FTIR). Carbon-monoxide adsorption on γ-Al₂O₃ and Mo/Al₂O₃ catalysts dehydroxylated and reduced at different temperatures was studied at 78 K by IR spectroscopy. However, our results indicate that there is an approximately linear correlation between the increase either of dehydroxylation or the extent of reduction of the catalysts and the increasing absorbance of CO due to CO adsorption on Lewis acid sites created upon dehydroxylation of γ-Al₂O₃ and reduction of Mo/Al₂O₃.     

Rh(I)-catalyzed Pauson-Khand reaction of 1-phenylsulfonyl-1,2-octadien-7-yne derivatives

The Rh(I)-catalyzed PKR of 1-phenylsulfonyl-1,2-octadien-7-ynes and their aza derivatives exclusively produced the corresponding 9-phenylsulfonylbicyclo[4.3.0]nona-1,6-dien-8-ones and no 4-(phenylsulfonylmethylidene)bicyclo[3.3.0]oct-1-en-3-ones could be detected. Thus, the ring-closing pattern was found to be the same as those of the previously reported 3-phenylsulfonyl-1,2-octadien-7-yne derivatives. However, the formation of 4-(phenylsulfonylmethylidene)-7-oxabicyclo[3.3.0]oct-1-en-3-ones was observed as a minor product when the 5-oxa congeners were used. In addition, a larger ring-sized product, 10-phenylsulfonyl-5-azabicyclo[5.3.0]deca-1,7-dien-9-one derivative, was obtained from the 6-aza derivative of 1-phenylsulfonyl-1,2-nonadien-8-yne.     

Hydrogen-induced metal-oxide interaction studied on noble metal model catalysts

Summary The effect of hydrogen reduction on the structure and catalytic properties of “thin film”and “inverse”model systems for supported metal catalysts is discussed. Thin film model catalysts were obtained by epitaxial growth of Pt and Rh nanoparticles on NaCl(001), which were coated with amorphous or crystalline supports of alumina, silica, titania, ceria and vanadia. Structural and morphological changes upon hydrogen reduction between 473 and 973 K were examined by high resolution electron microscopy. Metal-oxide interaction sets in at a specific reduction temperature and is characterized by an initial “wetting”stage, followed by alloy formation at increasing temperature, in the order VO_x< TiO_x< SiO₂< CeO_x< Al₂O₃. “Inverse”model systems were prepared by deposition of oxides on a metal substrate, e.g. VO_x/Rh and VO_x/Pd. Reduction of inverse systems at elevated temperature induces subsurface alloy formation. In contrast to common bimetallic surfaces, the stable subsurface alloys of V/Rh and V/Pd have a purely noble metal-terminated surface, with V positioned in near-surface layers. The uniform composition of the metallic surface layer excludes catalytic ensemble effects in favor of ligand effects. Activity and selectivity, e.g. for CO and CO₂methanation and for partial oxidation of ethene, are mainly controlled by the temperature of annealing or reduction. Reduction above 573 K turned out to be beneficial for the catalytic activity of the subsurface alloys, but not for the corresponding thin film systems which tend to deactivate viaparticle encapsulation.</o:p>     

An IR Study on Adsorption of CO and NO on Copper Ion-exchanged Zeolite Beta

Thee adsorption of CO and NO on copper ion-exchanged zeolite Beta was investigated using IR method.It was found that the thermalvacuum pretreatment procedure could result in the reduction of Cu2 ions in zeolite Beta.The adsorption of CO on Cu sites in zeolite Beta closely follows Langmuir isotherm.Another Cu species may form during the reaction between water and CO.The catalytic decomposition of NO on the zeolite was observed at room temperature,indicating that the decomposition reaction may occur between two coordinated NO ligands of the same dinitrosyhc complex.Furthermore,the appearance of two series of NO adsorption bands reveals that copper ions existing at different cation sites may have different effect on the adsorption and decomposition of NO molecules.     

Calorimetric study of room temperature adsorption of N2O and CO on Cu(II)-exchanged ZSM5 zeolites

Copper ion-exchanged ZSM5 zeolites have been prepared with different cooper loadings from under- to over-exchanged levels. The adsorptions of N₂O and CO at 303 K have been studied using calorimetric method and infrared spectroscopy. The samples were additionally characterised by ammonia adsorption at 423 K. The active sites for both N₂O and CO are Cu(I) ions, which were formed as a result of pre-treatment in vacuum at 673 K.

Room temperature adsorption of nitrous oxide at low equilibrium pressures (up to 66.7 Pa) resulted in small amounts of chemisorbed N₂O (<0.2 molecule per one Cu ion). Differential heats of N₂O adsorption between 80 and 30 kJ/mol were obtained. Differential heats of CO adsorption between 140 and 40 kJ/mol were obtained. The obtained amounts of chemisorbed species in the investigated systems and the values of differential heats of both nitrous oxide and carbon monoxide demonstrate the dependence on the copper content.     

多金属氧酸盐材料在二氧化碳电催化还原领域中的研究进展

随着工业发展和全球人口的持续增长,人类对化石燃料的消耗日益增加,从而导致大气中二氧化碳含量的显著增加以及与之相伴的一系列环境问题.电化学还原二氧化碳制备高附加值的燃料和化学品具有稳定的效率和较高的经济可行性等特点,目前已成为一种有前景的策略来缓解当前全球面临的能源短缺和气候变暖问题.然而,电催化二氧化碳还原过程存在反应...     

Ni-Co、Ni-Cu双金属合金催化剂用于CO甲烷化

以钙钛矿型复合氧化物LaNi_0.9Co_0.1O₃和LaNi_0.9Cu_0.1O₃为前驱体制备了Ni-Co/La₂O₃和Ni-Cu/La₂O₃双金属合金催化剂。结果表明,双金属合金催化剂中,各组分间相互稀释,具有较强的抗烧结性能;催化剂表面的积炭主要取决于CO在催化剂表面的吸附形态,Ni-Co双金属催化剂中,Co掺杂改变了CO在催化剂表面的吸附形式和吸附强度,使得Ni-Co双金属催化剂具有较强的抗积炭性能。Ni-Co双金属合金催化剂用于CO甲烷化反应时,显现出较好的活性、选择性和稳定性。     

光驱动C1转换到高附加值化学品的研究进展

阐述了光驱动C1化学的最新研究进展,分别对光驱动费托合成、水煤气变换、二氧化碳加氢、甲烷重整和甲醇重整制氢的研究进行了综述,提出了当前研究存在的问题及发展方向.     

改性二氧化硅纳米颗粒提高二氧化碳泡沫稳定性的研究

通过纳米二氧化硅的硅烷化改性,使其在高矿化度盐水中可以稳定存在的前提下,研究了改性纳米颗粒与阳离子表面活性剂十二烷基三甲基氯化铵混合体系的溶液稳定性及协同稳定CO₂泡沫的效果.研究结果表明,无机盐离子对改性纳米颗粒与阳离子表面活性剂间的静电吸引力具有屏蔽作用,且矿化度越高,屏蔽效果越明显,从而混合溶液更易于在高盐水中稳定;纳米颗粒表面的活性剂吸附层受二者浓度的影响,进而影响了颗粒的亲/疏水性;当混合体系中的表面活性剂浓度低于临界胶束浓度(CMC)时,混合溶液与CO₂的界面张力高于单独活性剂溶液,而当活性剂浓度高于CMC时,对CO₂-溶液界面张力几乎无影响,最低界面张力可降至6 mN/m左右;改性纳米颗粒的加入可以进一步提高CO₂体相泡沫半衰期一倍以上,但受二者浓度比例的影响;纳米颗粒的加入有效提高了多孔介质中泡沫的表观黏度,最大增幅由20 mPa·s增至55 mPa·s左右,泡沫黏度增加接近3倍,增强了CO₂泡沫驱的封堵作用.