固体氧化物电解池直接电解CO2的研究进展

固体氧化物电解池是一种高效、环境友好型的能量转换器件,可以直接将电能转化为化学能. 本文介绍了近年来作者课题组在固体氧化物电解池直接用于CO₂还原的研究进展,并以阴极材料为主着重讨论了金属陶瓷电极和混合导电型钙钛矿氧化物电极的研究工作,最后展望了未来固体氧化物电解池直接电解CO₂的研究思路和方向.     

Carbon-Supported Silver Catalysts for CO Selective Oxidation in Excess Hydrogen

Carbon materials were used as supports for Ag catalysts that are prepared using the conventional wet impregnation method, and their catalytic properties for CO selective oxidation in excess hydrogen at temperatures below 483 K were tested. A variety of techniques, e.g. N2 adsorption, XPS, TPD, UV-Vis DRS, TEM and SEM, were used to determine the influence of physical and chemical properties of the carbon on the properties of Ag catalyst. It was found that defects on the carbon surface served as nucleation sites for silver ions, while functional groups on carbon surface induced their reduction to the metallic form. The formation of silver particles on carbon was governed by homogeneous and/or heterogeneous nucleation during the impregnation and subsequent activation processes. The best catalytic performance was obtained with a Ag/carbon black catalyst with a uniform size distribution of silver nanoparticles (about 12 nm), moderate BET surface area (with a mesoporous structure), and a limited amount of carbon-oxygen groups. The research indicates that carbon materials are potentially good supports for silver catalysts for preferential oxidation of CO in excess hydrogen.     

CuO/CeO2催化剂的催化氧化性能及其表征

用CO流动反应法 ,程序升温还原 (TPR) ,光电子能谱 (XPS)和X射线衍射Rietveld分析等技术研究了CuO ,CeO2 及CuO/CeO2 各组分催化剂。结果表明 :单组分的CuO和CeO2 对CO的氧化活性较低 ,但CuO与CeO2 形成复合氧化物后 ,其CO氧化活性明显提高 ,这可能与铜物种在CeO2 表面的价态 (Cu2 + 和Cu+ ) ,分散状态和还原性能有关。CuO在CeO2 上的负载量对铜物种在CeO2 表面形成的价态 (Cu2 + 和Cu+ )至关重要 ,CuO的负载量为 1 0 %时 ,XPS检测不到Cu2p3/2 (eV)结合能 ;当CuO的负载量为 5 0 %时 ,CuO主要以Cu2 + 和Cu+ 形式存在 ,而负载量大于 5 0 %时 ,CuO则以Cu2 + 形式存在。由于形成了CuO/CeO2 复合氧化物 ,使离子半径小于Ce4 + 的CuO进入了CeO2 晶格 ;当CuO的负载量达到 5 0 %时 ,CuO的晶粒尺寸值为最小 ( 6 1nm) ,而晶格畸变值为最大 ( 2 86× 10 - 3) ,此时 ,催化剂具有较高的表面能和最佳的CO氧化活性     

溶剂化金属原子浸渍法制备Pd-Cu/γ-Al2O3低温CO氧化催化剂

Nano-particle Pd/γ-Al₂O₃ monometallic and Pd-Cu/γ-Al₂O₃ bimetallic catalysts were prepared by solvated metal atom impregnation (SMAI) method. The results of XRD measurement indicated that Pd- Cu alloy was formed in the bimetallic catalysts and the crystalline particle size of the alloy increased as Cu contents increased with av-erage diameters < 6.0nm for all the samples. XPS and Auger spectra showed that Pd was in zero- valent state, Cu existed mainly in zero- valent state and partially in monovalent state Cu⁺. The Pd/γ-Al₂O₃ and Pd-Cu/γ-Al₂O₃ catalysts exhibited higher activity for CO oxidation at low temperature. The activity of Pd-Cu/γ-Al₂O₃ bimetallic catalyst was higher than that of Pd/γ-Al₂O₃ monometallic catalyst. The Pd-Cu/γ-Al₂O₃ catalyst with Pd/Cu atomic ratio of 1∶1 showed the highest activity.     

K/Ru(10ī0)表面上的CO-4a1轨道对称性确定

用同步辐射角分辨偏振紫外光电子谱对Ｋ／Ｒｕ（１０１０）面上吸附分子轨道的对称性测量发现：结合能在１１、．２ｅＶ的ＣＯ－４ａ１（４σ）分子轨道对ｓ偏振光（在沿〈１２１０〉的人射面）是禁戒的。结果表明由于Ｋ的强烈影响,ＣＯ的分子轨道重新排列（ｓＰ＾２杂化）。依据选择定则和分子轨道的对称性６说明,ｓｐ＾２再杂化的ＣＯ分子吸附的桥位取向是〈１２１０〉晶向。     

不同分子筛载体对CO加氢产物分布的影响

研究了几种小孔分子筛ＺＳＭ－５，ＨＹ，ＮａＹ及β担载ＺｒＯ２对Ｃ加氢反应的催化作用，并就产物的分布情况与担载ＺｒＯ２的硅铝中孔分子筛进行了对比研究。其中中孔分子筛分别用季铵盐和一级胺为模板剂，在水热条件和常温常压下合成；并用ＢＥＴ，ＸＲＤ，ＳＥＭ等手段表征了它们的孔道和骨架结构。另外，考察了碱金属Ｋ＾２＋，Ｎａ＾２＋对催化剂催化性能的影响。     

通过脱碳控制全球平均温度

Establishing a reliable method to predict the global mean temperature (T_e) is of great importance because CO₂ reduction activities require political and global cooperation and significant financial resources. The current climate models all seem to predict that the earth's temperature will continue to increase, mainly based on the assumption that CO₂ emissions cannot be lowered significantly in the foreseeable future. Given the earth's multifactor climate system, attributing atmospheric CO₂ as the only cause for the observed temperature anomaly is most likely an oversimplification; the presence of water (H₂O) in the atmosphere should at least be considered. As such, T_e is determined by atmospheric water content controlled by solar activity, along with anthropogenic CO₂ activities. It is possible that the anthropogenic CO₂ activities can be reduced in the future. Based on temperature measurements and thermodynamic data, a new model for predicting T_e has been developed. Using this model, past, current, and future CO₂ and H₂O data can be analyzed and the associated T_e calculated. This new, esoteric approach is more accurate than various other models, but has not been reported in the open literature. According to this model, by 2050, T_e may increase to 15.5 ℃ under "business-as-usual" emissions. By applying a reasonable green technology activity scenario, T_e may be reduced to approximately 14.2 ℃. To achieve CO₂ reductions, the scenario described herein predicts a CO₂ reduction potential of 513 gigatons in 30 years. This proposed scenario includes various CO₂ reduction activities, carbon capturing technology, mineralization, and bio-char production; the most important CO₂ reductions by 2050 are expected to be achieved mainly in the electricity, agriculture, and transportation sectors. Other more aggressive and plausible drawdown scenarios have been analyzed as well, yielding CO₂ reduction potentials of 1051 and 1747 gigatons, respectively, in 30 years, but they may reduce global food production. It is emphasized that the causes and predictions of the global warming trend should be regarded as open scientific questions because several details concerning the physical processes associated with global warming remain uncertain. For example, the role of solar activities coupled with Milankovitch cycles are not yet fully understood. In addition, other factors, such as ocean CO₂ uptake and volcanic activity, may not be negligible.     

Cleavage of the Fe—Fe Bond of （Me2SiSiMe2） [η^5－C5H4Fe（CO）2]2 with Na／Hg and Molecular Structure of the Ring－Opened Complex

The reaction of the rifle cyclic complex (1) with sodium amalgam in THF resulted in the expected cleavage of the Fe-Fe bond to afford his-sodium salt ( Me2SiSiMe2 ) [η^5-C5H4Fe(CO)2]2 (4). The latter was not isolated and was used directly to react with MeI, PhCH2Cl, CH3C(O)Cl, PhC(O)Cl,Cy3SnCl (Cy= cyclohexyl) or Ph3SnCl to afford corresponding ring-opened derivatives (Me2SiSiMe2) [η^5-C5H4Fe(CO)2]2 [5, R=Me; 6, R=PhCH2; 7, R=CH3C(O); 8, R=PhC(O); 9, R = Cy3Sn or 10, R = Ph3Sn ]. The crystal and molecular structures of 10 were determined by X-ray diffraction analysis. The molecule took the desired ant/ conformation around the Si-Si bond. The length of the Si--Si bond is 0.2343(3)nm, which is essentially identical to that in the cyclic structure of 1[0.2346(4) tun]. This result unambiguously demonstrates that the Si--Si bond in the cyclic structure of 1 is not subject to obvious strain.     

The Chemistry of Tetrafluoroallene： One－pot Synthesis of Trifluoromethylindolizines from 1,3－Diiodo－1,1,3,3－tetrafluoropropane by 1,3－Dipolar Cycloaddition

Heating a mixture of 1, 3-diiodo-1, 1, 3, 3-tetrafluoropropane (2), K2CO3, pyridinium bromides (3) in CH3CN at 65℃ for 10 h gives the corresponding trifluoromethylindolizines.     

Fe3(CO)12与P(NEt2)2Cl的反应--两核和三核铁羰基簇合衍生物的合成和晶体结构

Fe_3(CO)_(12)与配位基前体P(NEt_2)_2Cl反应,给出4个新的两核和三核铁羰基簇合衍生物:Fe_2(CO)_6(μ-Cl)[μ-P(NEt_2)_2](Ⅰ),Fe_2(CO)_6[μ-P(NEt_2)_2]_2(Ⅱ),Fe_3(CO)_9(μ-CO)(μ_3-PNEt_2)(Ⅲ)和Fe_3(CO)_9(μ_3-PNEt_2)[P(NEt_2)_3](Ⅳ)。在反应期间,配前体分子中的P-Cl和P-N键劈开,形成的分子片Cl、PNEt_2、P(NEt_2)_2和P(NEt_2)_3作为配体与铁羰合物重新组建成上述簇合物。利用X射线衍射法测定了它们的晶体结构。Ⅰ属三斜晶系,P1空间群,晶胞参数a=0.8745(6)nm,b=0.9601(7)nm,c=1.3996(10)nm,α=74.131(11)°,β=79.480(12)°,γ=69.727(12)°,V=1.0553(13)nm~3,D_c=1.543g·cm~(-3),Z=2,R=0.0443,wR=0.0831。Ⅱ属正交晶系,Pbcn空间群,晶胞参数a=1.0153(3)nm,b=1.7543(5)nm,c=1.6860(5)nm,V=3.0031(15)nm~3,D_c=1.394g·cm~(-3),Z=4,R=0.0519,wR=0.1035。Ⅲ属单斜晶系,P2_1/c空间群,晶胞参数a=1.0280(5)nm,b=1.2113(5)nm,c=1.9192(7)nm,β=93.560(7)°,V=2.1366(16)nm~3,D_c=1.712g·cm~(-3),Z=4。Ⅳ属单斜晶系,Cc空间群,晶胞参数a=1.5875(7)nm,b=1.0359(5)nm,C=2.1919(9)nm,β=101.266(8)°,V=3.535(3)nm~3,Dc=1.443g·cm~(-3),Z=4。Ⅰ和Ⅱ为两核铁簇,其簇骨架Fe_2PCl和Fe_2P_2呈蝶状。Ⅲ和Ⅳ