Binding of the bioactive component daphnetin to human serum albumin demonstrated using tryptophan fluorescence quenching

Daphnetin (7,8-dihydroxycoumarin), one of the major bioactive components isolated from Daphne koreane Nakai, has been used in traditional Chinese medicine for the treatment of coagulation disorders. It is also a chelator, an antioxidant and a protein kinase inhibitor. In this paper, a combination of intrinsic fluorescence, Fourier transform infrared (FT-IR) spectroscopy and circular dichroic (CD) spectroscopy has been used to characterize the binding between daphnetin and human serum albumin (HSA) under physiological conditions with drug concentrations of 6.7 x 10(-6) - 2.3 x 10(-5) mol x L(-1), and a HSA concentration of 1.5 x 10(-6) mol x L(-1). Changes in the CD spectra and FT-IR spectra were observed upon ligand binding, and the degree of tryptophan fluorescence quenching did change significantly in the complexes. These data have proved the change in protein secondary structure accompanying ligand binding. The change in tryptophan fluorescence intensity was used to determine the binding constants. The thermodynamic parameters, the enthalpy change (DeltaH) and the entropy change (DeltaS) were calculated to be -12.45 kJ x mol(-1)and 52.48 J x mol(-1) x K(-1) according to the van't Hoff equation, which indicated that hydrophobic and electrostatic interactions played the main role in the binding of daphnetin to HSA, in accordance with the results of calculations performed on a Silicon Graphics Ocatane2 workstation. In addition, the binding distance between daphnetin and HSA was obtained (4.02 nm) based on the Forster energy transfer theory.     

First 13C‐NMR Assignments of Betaxanthins

Due to their inherent liability towards highly acidic conditions previously considered to be a prerequisite for data acquisition, betaxanthin structure dereplication by NMR spectroscopy has been scarcely reported and was, hitherto, exclusively based on ¹H‐NMR data interpretation. Applying only slightly acidic conditions, we herein report the first ¹³C‐NMR data of two betaxanthins, i.e., indicaxanthin ( 1 ), isolated from yellow‐orange cactus pear fruits (Opuntia ficus‐indica [L.] Mill . cv. ‘Gialla’), and of miraxanthin V ( 2 ) from yellow Swiss chard petioles (Beta vulgaris L. ssp. cicla [L.] Alef . cv. ‘Bright Lights’), as derived by gHSQC‐ and gHMQC‐NMR experiments and inverse detection.     

The interaction of dibutyltin dilaureate with tetraethyl orthosilicate in sol-gel systems

Sols composed of dibutyltin dilaureate (DTL) and tetraethyl orthosilicate (TEOS) were prepared using a mixture of methyl ethyl ketone (MEK) and acetone as the solvent in order to study the interaction between the oligomeric Sn and Si species. The hydrolysis molar ratio r (r=nH₂O/nM (M: Si, Sn or Si+Sn) was 2. The use of an acid or basic catalyst was avoided, as the sols are intended to be used in the formulation of potential stone consolidants. The sols were studied by several spectroscopic techniques including Small Angle X-ray Scattering (SAXS), ²⁹Si and ¹¹⁹Sn NMR, Fourier Transform Infrared (FTIR) spectroscopy and X-ray diffraction (XRD). According to the spectroscopic results the lauric acid produced by the hydrolysis of DTL modifies the condensation path of the Si species, leading to the formation of two types of oligomeric chains: linear swollen and multiparticle diffusion-limited aggregates, depending on the molar ratio Sn/Si. The ²⁹Si NMR results indicated that the hydrolysis of DTL catalizes the condensation of the Si species, giving as a result higher condensation extents of the Si species in the Sn-Si sols compared to a pure Si sol. Based on the Radial Distribution functions (RDF) and the FTIR results, heterocondensation occurred.     

Influence of Al2O3 Nanoparticles on the Thermal Stability of Ultra-Fine Grained Copper Prepared by High Pressure Torsion

Summary.  Ultra-fine grained (UFG) Cu (grain size 80 nm) containing 0.5 wt.% Al₂O₃ nanoparticles (size 20 nm) was prepared by high pressure torsion (HPT). Positron lifetime spectroscopy was employed to characterize the microstructure of this material, especially with respect to types and concentration of lattice defects. The evolution of microstructure with increasing temperature was studied by positron lifetime spectroscopy and X-ray diffraction measurements. The thermal stability of the Cu + 0.5 wt.% Al₂O₃ nanocomposite was compared with that of pure UFG Cu prepared by the same technique. The processes taking place during thermal recovery of the initial nanoscale structure in both studied materials are described. Received October 5, 2001. Accepted (revised) December 20, 2001     

A new electrolytic dissolution of aluminum alloys and determination of some constituents by inductively coupled plasma optical emission spectrometry

The new electrolytic dissolution in batch of aluminum alloys samples as grains or turns and the determination of Fe, Cu, Mn, Mg, Cr, Ni, Zn, Pb and Ti by ICP OES was investigated. In on-line electrodissolution procedures described in the literature, samples were restricted to be in the form of solid blocks or plates with one polished flat face. Here, the sample was loaded in the barrel of a modified disposable syringe (the anodic semi-cell) and pressed with a modified plunger fitted with a platinum disk to establish electrical contact with the analyte. This arrangement was introduced in a beaker containing the electrolyte (1 mol L⁻¹ HNO₃) and a platinum wire as the cathode. The resulting solution from electrodissolution (0.6 A) was used for the ICP OES determinations. The influence of the aluminum concentration increase on the determination of the elements was evaluated. Electrodissolution of certified reference materials and commercial samples revealed relative errors lower than 10% for the elements Fe, Cu, Mg, Ni, Cr, Zn and Ti (when their content is above 0.1%). Higher inaccuracies (>10%) were observed for Mn and for Fe in B.C.S. 268/1 reference material certified. The proposed method presented a relative standard deviations (R.S.D.) lower or circa 10% to all of the elements (except Pb). In comparison with traditional acid dissolution, the proposed electrodissolution method is relatively fast (about 30 min), it is clean (there is no projection of solution) and simple (heating and fumes exhaust system were not necessaries).     

The Diels-Alder reaction between substituted 6,6-dimethyl-2-vinylnorpinenes and maleic anhydride

Cycloaddition of substituted 6,6-dimethyl-2-vinylnorpinenes with maleic anhydride occursvia the attack of a dienophile on diene from the less hindered side of the bicyclic fragment. IR, UV, CD, and¹H NMR spectra of adducts have been studied.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1546–1548, August, 1995.The authors are grateful to I. E. Ismaev for recording several¹H NMR spectra.     

Comparison of zinc and cadmium plasma parameters produced by laser-ablation

We report the measurement of the zinc and cadmium plasma parameters produced by the fundamental, second, and third harmonics of the neodymium-doped yttrium aluminium garnet laser. The excitation temperature has been determined from the Boltzmann plot method, whereas the electron number density is estimated from the Stark broadened profile of several spectral lines. The temporal evolution of the plasma has also been investigated. Besides, we present experimental relative transition probabilities of the Zn (4s5s ³S₁ → 4s4p ³P_0,1,2) and Cd (5s6s ³S₁ → 5s5p ³P_0,1,2) triplets and compare our data with that listed in the National Institute of Standards and Technology database. The experiments have been performed in air but also in He, Ne and Ar atmosphere to study the effects of ambient gas environment on the emission intensity of the atomic and ionic lines and on the plasma parameters.     

Analysis of the effects of catalytic bleaching on cotton

Hydrogen peroxide can be catalyzed to bleach cotton fibers at temperatures as low as 30°C by incorporating dinuclear tri-μ-oxo bridged manganese(IV) complex of the ligand 1,4,7-trimethyl-1,4,7-triazacyclononane (MnTACN) as the catalyst in the bleaching solution. The catalytic system was found to be more selective under the conditions applied than the non-catalytic H₂O₂ system, showing better bleaching performance while causing slightly lower decrease in degree of polymerization (DP) of cellulose. In order to gain fundamental knowledge of the bleach effect on cotton fibers and cellulose as its main component, especially after catalytic bleaching, X-ray Photoelectron Spectroscopy (XPS) was used to study surface chemical effects. The Washburn method was applied to investigate wetting properties, and liquid porosity was used to obtain pore volume distribution (PVD) plots. Parallel analyzes performed on model cotton fabric, i.e. “clean” cotton fabric stained with morin - a pigment regularly found in native cotton fiber, helped to differentiate between pigment oxidation and other bleaching effects produced on the (regular) industrially scoured cotton fabric. Bleaching was not limited to the chemical action but also affected cotton fiber capillary parameters most likely due to the removal of non-cellulosic materials as well as chain-shortened cellulose.