Synthesis and magnetic properties of novel polymeric complexes containing bithiazole rings

A novel linear polymer (PFABT) containing bithiazole rings was synthesized by polycondensation of 2,2′‐diamino‐4,4′‐bithiazole (DABT) and formaldehyde. The complexes of PFABT with two transition metal ions (Fe²⁺, Cu²⁺) were prepared for the first time. The polymer was determined through FT‐IR, ¹H‐NMR and elemental analysis (EA), and the complexes were characterized by FT‐IR. The magnetic behaviors of these complexes were measured as a function of magnetic field strength (0–50 kOe) at 4 K and as a function of temperature (4–300 K) under an applied magnetic field of 30 kOe. The results show that PFABT‐Cu²⁺ is a ferromagnet while PFABT‐Fe²⁺ is an anti‐ferromagnet. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of monodisperse poly(chloromethylstyrene-co-divinylbenzene) beads and their application in separation of biopolymers

The monodisperse, porous poly(chloromethylstyrene-co-divinylbenzene) beads of 7.9 microm were prepared by a single-step swelling and polymerization method. The seed particles prepared by dispersion polymerization exhibited good absorption of the monomer phase. Based on this media, a weak cation-exchange (WCX) stationary phase for HPLC was synthesized by a new chemically modified method. The prepared resin has advantages of biopolymer separation, high column efficiency, low column backpressure, high protein mass recovery, and good resolution for proteins. The dynamic protein-loading capacity of the synthesized WCX packings was 18.2 mg/g. Five proteins were separated in 3.0 min using the synthesized WCX stationary phase. The experimental results show that the obtained WCX resin has very weak hydrophobicity. The WCX resin was also used for the rapid separation and purification of lysozyme from egg white in 5.0 min with only one step. The purity and specific bioactivity of the purified lysozyme were found to be more than 93% and 70 245 U/mg, respectively.     

细胞色素C的电化学行为研究

本文评述了细胞色素Ｃ电化学研究的发展概况，重点介绍了细胞色素Ｃ在促进剂作用下的电化学行为，促进剂种类，影响促进作用的因素及促进机理。     

Mass spectrometric analysis of low molecular mass polyesters by laser desorption/ionization on porous silicon

A low molecular mass polyester was analyzed by desorption/ionization on porous silicon (DIOS) mass spectrometry. The results were compared with those of matrix-assisted laser desorption ionization (MALDI) mass spectrometry using matrixes of alpha-cyano-4-hydroxycinnamic acid (CHCA) and 10,15,20-tetrakis(pentafluorophenyl)porphyrin (F20TPP). The CHCA matrix was not suitable for characterization of low molecular mass components of the polyester because the matrix-related ions interfered with the component ions. On the other hand, the F20TPP matrix showed no interference because no matrix-related ions appeared below m/z 822. However, the solvent selection for determining optimal conditions of sample preparation was limited, because F20TPP does not dissolve readily in any of the available organic solvents. In the DIOS spectra, the polymer ions were observed at high sensitivity without a contaminating ion. No matrix is needed for DIOS spectra of low molecular mass polyesters, facilitating sample preparation and selectivity of a precursor ion in post-source decay measurements.     

Kinetic Spectrophotometric Determination of Trace Amounts of Nitrite by Catalytic Reaction between Methylthymol Blue and Bromate

A kinetic spectrophotometric method for determination of trace nitrite in two dynamic ranges (2–100 and 100–500 ng/mL) based on its catalytic effect on the reaction between methylthymol blue and potassium bromate in acidic (sulfuric acid) media is described. The reaction was monitored spectrophotometrically by measuring the decreasing color of methylthymol blue at 437 nm by the fixed‐time method of 4.0 min at 30°C. The detection limit is 0.6 ng/mL, and the relative standard deviations for 50.0 and 250.0 ng/mL nitrite are 1.6% and 1.3%, respectively. The method was used for the determination of nitrite in water samples.     

PEG-PLA嵌段共聚物的合成及~(13)C NMR对平均链段长度的测定

本文报道聚乙二醇(PEG)在辛酸亚锡存在下与丙交酯(LA)反应合成PEG-PLA嵌段共聚物,用~(13)C NMR测定了共聚物的结构,估算了平均链段长度.实验结果表明,L_(PEG)在反应过程中保持不变,而L_(PLA)随反应时间和LA在原料配比中含量的增加而增加,呈逐步聚合反应特点.对聚合反应机理作了推测.     

温度及pH敏感的树枝状高分子衍生物合成及药物控制释放研究

对合成的系列聚酰胺-胺型(PAMAM)树枝状高分子进行端基的羟基化和氯乙酰化两步修饰,使PAMAM最外层接上烷基氯.以修饰产物为引发剂,通过原子转移自由基引发甲基丙烯酸N,N-二甲氨基乙酯(DMAEMA)聚合得到树枝状PAMAM高分子衍生物,并对其结构用FTIR、1H-NMR和粒径分析进行了表征.紫外可见分光光度仪测定证实此高分子具有温度及pH敏感性.通过对小分子药物控制释放研究表明,此树枝状高分子衍生物通过环境pH值可有效地控制小分子药物的释放.