用荧光探针签别CYP2C9*3基因

用一种基激复合物荧光探针系统来签别碱基错配的CYP2C9*3基因,该系统选择两个分开的与靶点碱基相对应的12碱基荧光标记的寡核苷酸作为探针,分别对24碱基、47碱基、质粒(3165bp)的靶点CYP2C9基因和CYP2C9*3基因进行杂交配对,结果该基激复合物荧光探针系统能有效签别各种长度的CYP2C9基因和CYP2C9*3基因,背景干扰很低,灵敏度高,可尝试用于其他基因型的遗传多态性的签别。     

白光LED用红色发射荧光粉YVO_4:Ce~(3+)(Gd~(3+))的制备与表征

用高温固相反应法制备了稀土离子Ce3+、Gd3+双掺杂的YVO4发光材料,通过X射线衍射(XRD)、扫描电镜(SEM)、激发以及发射光谱等测试手段对YVO4:Ce3+(Gd3+)荧光粉的制备条件、发光性能以及表面形貌进行了研究。XRD结果表明,在1100℃恒温5 h可得到Ce3+(Gd3+):YVO4纯相。SEM结果显示颗粒基本为球形,粒径约为300~500 nm。激发光谱测试表明,Ce3+(Gd3+):YVO4荧光粉在近紫外光区(232 nm)和蓝光区(424 nm)可以被有效地激发,用424 nm的蓝光激发样品时,Ce3+(Gd3+):YVO4荧光粉在611 nm和659 nm处的发光强度最大;因此,这种荧光粉可以作为组合型白光LED的红色发射荧光粉的候选材料。     

Enhanced gas-sensing behaviour of Ru-doped SnO2 surface: A periodic density functional approach

A theoretical study on Ru-doped rutile SnO₂(1 1 0) surface has been carried out by means of periodic density functional theory (DFT) at generalized gradient approximation (GGA-RPBE) level with a periodic supercell approach. Electronic structure analysis was performed based on the band structure and partial density of states. The results provide evidence that the electronic structures of SnO₂(1 1 0) surface are modified by the surface Ru dopant, in which Ru 4d orbital are located at the edge of the band gap region. It is demonstrated that molecular oxygen adsorption characteristics on stoichiometric SnO₂(1 1 0) surface are changed from endothermic to exothermic due to the existence of surface Ru dopant. The dissociative adsorption of molecular oxygen on the Ru_5c/SnO₂(1 1 0) surface is exothermic, which indicates that Ru could act as an active site to increase the oxygen atom species on SnO₂(1 1 0) surface. Our present study reveals that the Ru dopant on surface is playing both electronic and chemical role in promoting the SnO₂ gas-sensing property.     

Discrimination of strain and temperature based on a polarization-maintaining photonic crystal fiber incorporating an erbium-doped fiber

A simple sensing method for simultaneous measurement of temperature and strain is investigated by using a Sagnac fiber loop mirror composed of a polarization-maintaining photonic crystal fiber (PM-PCF) incorporating an erbium-doped fiber (EDF). Amplified spontaneous emission created by a pumped EDF is transmitted to a Sagnac fiber loop mirror. The interference between two counter-propagating signals in a Sagnac fiber loop mirror generates a periodic transmission spectrum with respect to wavelength. When external temperature is increased, the transmission peak power reduces because the amplified spontaneous emission of the EDF is decreased by the applied temperature change (0.04 dB/°C). The peak wavelength is shifted into the shorter wavelength because of the negative temperature dependence of the birefringence of the PM-PCF (0.3 pm/°C). As the applied strain increases, the peak wavelength of the transmission spectrum of the Sagnac loop mirror incorporating the EDF shifts into a longer wavelength (1.3 pm/με) because the phase change of the proposed sensing probe is directly proportional to the applied strain. The transmission peak power, however, is not changed by the applied strain. Since the source and the sensing probe are integrated, the overall system configuration is significantly simplified without requiring any additional broadband light source. Therefore, it is possible to simultaneously measure temperature and strain by monitoring the variation of transmission peak power and peak wavelength, respectively.     

Structural modifications of diamond like carbon films induced by MeV nitrogen ion irradiation

Diamond-like carbon (DLC) films were deposited on Si(1 0 0) substrates using plasma deposition technique. The deposited films were irradiated using 2 MeV N⁺ ions at fluences of 1×10¹⁴, 1×10¹⁵ and 5×10¹⁵ ions/cm². Samples have been characterized by using Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy (HRTEM). Analysis of Raman spectra shows a gradual shift of both D and G band peaks towards higher frequencies along with an increase of the intensity ratio, I(D)/I(G), with increasing ion fluence in irradiation. These results are consistent with an increase of sp² bonding. XPS results also show a monotonic increase of sp²/sp³ hybridization ratio with increasing ion fluence. Plan view TEM images show the formation of clusters in the irradiated DLC films. HRTEM micrographs from the samples irradiated at a fluence of 5×10¹⁵ ions/cm² show the lattice image with an average interplanar spacing of 0.34 nm, revealing that the clusters are graphite clusters. The crystallographic planes in these clusters are somewhat distorted compared to the perfect graphite structure.     

Electronic structure of dysprosium silicide films grown on a Si(1 1 1) surface

The thickness-dependent electronic structures of Dy silicide films grown on a Si(1 1 1) surface have been investigated by angle-resolved photoelectron spectroscopy. Two (1×1) periodic bands, both of them cross the Fermi level, have been observed in the silicide films formed by Dy coverages of 1.0 monolayer and below, and more than five () periodic bands have been observed in thicker films. Taking the () periodic structure of Dy atoms in the submonolayer silicide film into account, the periodicity of the two metallic bands indicate that they mainly originate from the orbitals of Si atoms, which form a (1×1) structure. Of the () periodic bands observed in thick films, four of them are well explained by the folding of the (1×1) bands into a () periodicity. Regarding the other band, the three () periodic bands would originate from the electronic states related to the inner Si layers that form a () structure, and the one observed in the 3.0 ML film only might originate from the electron located at the interface between bulk Si and the Dy silicide film.     

Corrosion behavior of Nd9.4Pr0.6Febal.Co6B6Ga0.5TixCx (x=0, 1.5, 3, 6) nanocomposites annealed melt-spun ribbons

The effect of Ti and C additions on the corrosion behavior of Nd_9.4Pr_0.6Fe_bal.Co₆B₆Ga_0.5Ti_xC_x (x=0, 1.5, 3, 6) isotropic nanocomposite melt-spun ribbons in 3.5 wt% sodium chloride solution was studied. The melt-spun ribbons were annealed at 750 °C for 10 min in argon-filled quartz capsules. The microstructure of multiphase nanocrystalline samples and corrosion products was characterized using the X-ray diffraction and electron microscopy techniques. The electrochemical behavior was assessed using potentiodynamic polarization and electrochemical impedance spectroscopy. The results show that the addition of Ti and C increases the corrosion resistance of NdFeB ribbons; the best corrosion resistance was obtained for 1.5 wt% Ti and C content.     

Shape-dependent local internal stress of α-Cr2O3 nanocrystal fabricated by pulsed laser ablation

The α-Cr₂O₃ single-crystal nanocondensates were fabricated by pulsed laser ablation in air and characterized by analytical electron microscopy regarding shape-dependent local internal stress of the anisotropic crystal. The nanocondensates formed predominantly as rhombohedra with well-developed surfaces and occasionally hexagonal plate with thin edges and blunt corners. Such nanocondensates showed Raman shift for the CrO₆ polyhedra, indicating a local compressive stress up to ca. 4 GPa on the average. Careful analysis of the lattice fringes revealed a local compressive stress (0.5% strain) at the thin edge of the hexagonal plates and a local tensile stress (0.3–1.0% strain) near the relaxed , , and (0 0 0 1) surfaces of truncated rhombohedra. The combined effects of nanosize, capillarity force at sharp edge, and specific surface relaxation account for the retention of a local internal compressive stress built up in an anisotropic crystal during a very rapid heating–cooling process.     

Spectral flow invariants and twisted cyclic theory for the Haar state on

In [A.L. Carey, J. Phillips, A. Rennie, Twisted cyclic theory and an index theory for the gauge invariant KMS state on Cuntz algebras. arXiv:0801.4605], we presented a K-theoretic approach to finding invariants of algebras with no non-trivial traces. This paper presents a new example that is more typical of the generic situation. This is the case of an algebra that admits only non-faithful traces, namely SU_q(2) and also KMS states. Our main results are index theorems (which calculate spectral flow), one using ordinary cyclic cohomology and the other using twisted cyclic cohomology, where the twisting comes from the generator of the modular group of the Haar state. In contrast to the Cuntz algebras studied in [A.L. Carey, J. Phillips, A. Rennie, Twisted cyclic theory and an index theory for the gauge invariant KMS state on Cuntz algebras. arXiv:0801.4605], the computations are considerably more complex and interesting, because there are non-trivial ‘eta’ contributions to this index.     

On leafwise conformal diffeomorphisms

For every diffeomorphism φ:M→N$\phi :M\to N$ between 3-dimensional Riemannian manifolds M$M$ and N$N$, there are locally two 2-dimensional distributions _D±$D_{\pm }$ such that φ$\phi$ is conformal on both of them. We state necessary and sufficient conditions for a distribution to be one of _D±$D_{\pm }$. These are algebraic conditions expressed in terms of the self-adjoint and positive definite operator induced from _φ∗${\phi }_{\ast }$. We investigate the integrability condition of _D+$D_{+}$ and _D−$D_{-}$. We also show that it is possible to choose coordinate systems in which leafwise conformal diffeomorphism is holomorphic on leaves.