Acoustic characterization and prediction for fan-duct-plenum-room integrations

This paper investigates mutual influence of duct and room acoustics in the whole fan-duct-plenum-room integrations. Applying the parametric design language of finite element software ANSYS (APDL), dimensional and positional influence on system acoustics has been studied. Models with different room dimensions, duct lengths, duct cross-sections, duct locations, duct discharges and duct elbow were constructed, and their characteristics were compared qualitatively. Results show that small rooms, short ducts, large duct cross-sections and bell mouth duct discharges help to increase room sound pressure levels (SPLs); SPLs in ducts and plenums are sensitive to duct dimensions and duct discharge types but insensitive to duct locations and room dimensions; duct elbows have relatively indistinct acoustic influence in each component. Based on the calculation results, a semi-experimental method was proposed for simply and approximately evaluating indoor acoustic spectra of fan-duct-plenum-room integrations, then an example was used to demonstrate the prediction process. Finally, by adopting several ideal models, sound field constitutions, duct and room wall admittances and duct end reflection were explored quantitatively. This study may give a detailed understanding of fan-duct-plenum-room acoustics for researchers, also it might provide a new, simple and approximate prediction method for professionals to evaluate and improve fan-ducted acoustics.     

Bubble point pressure estimates from Gibbs ensemble simulations

Bubble pressure points of ethanol–1,1,1,2,3,3,3-heptafluoropropane (HFC-227ea refrigerant) mixtures from the third Industrial Fluid Properties Simulation Challenge are computed using publicly available molecular simulation software. Several published force fields are compared against the known answers provided in the contest guidelines and the best force fields are used to make predictions for the unknown results.     

SASEGASA: A New Generic Parallel Evolutionary Algorithm for Achieving Highest Quality Results

This paper presents a new generic Evolutionary Algorithm (EA) for retarding the unwanted effects of premature convergence. This is accomplished by a combination of interacting generic methods. These generalizations of a Genetic Algorithm (GA) are inspired by population genetics and take advantage of the interactions between genetic drift and migration. In this regard a new selection scheme is introduced, which is designed to directedly control genetic drift within the population by advantageous self-adaptive selection pressure steering. Additionally this new selection model enables a quite intuitive heuristics to detect premature convergence. Based upon this newly postulated basic principle the new selection mechanism is combined with the already proposed Segregative Genetic Algorithm (SEGA), an advanced Genetic Algorithm (GA) that introduces parallelism mainly to improve global solution quality. As a whole, a new generic evolutionary algorithm (SASEGASA) is introduced. The performance of the algorithm is evaluated on a set of characteristic benchmark problems. Computational results show that the new method is capable of producing highest quality solutions without any problem-specific additions.     

Analysis of Suzuki, Shanker, and Kumar formulations under strong compressions

A critical analysis of the Suzuki, Shanker, and Kumar formulations is presented by studying different classes of materials under high pressure. A similar trend for all the materials studied in the present work, demonstrates that Suzuki formulation is not capable to yield compression behaviour of solids. The Shanker formulation improves the results obtained by the Suzuki formulation in small compression range (0.9<V/V₀<1). For further compressions Shanker formulation also fails. On the other hand, the Kumar formulation is found to work well for the entire range of pressure. The reasons for the failure of Suzuki and Shanker formulations are discussed.     

Charge density study under high pressure

The experimental and analytical method of the high-pressure powder experiment at BL10XU, SPring-8, is described. There is no doubt that BL10XU must be one of the most appropriate beam lines for high pressure X-ray diffraction experiment taking advantage of third generation synchrotron source. As an example of the advanced charge density study under high pressure, the structural change of Cs₂Au₂Br₆ by applying pressure is studied by Rietveld/MEM analysis. It reveals that the structural change of Cs₂Au₂Br₆ by applying pressure occurs basically at electron level, such as valence state change and chemical bonding, which may be called the electronic phase transition.     

水力机械内鲤鱼草鱼的压力损伤模拟试验

通过试验人工模拟水力机械内压力变化过程,测量压力时间变化,观察并解剖分析不同压力变化过程对鲤鱼和草鱼造成损伤的情况。试验发现,负压状态下的压力变化过程会对鱼的生存构成直接威胁,并得到了新型环保水力机械设计中应采用的压力时变导数极限值。     

金属氢研究新进展

简要介绍了金属氢的研究意义和应用前景 ,详细评述了有关的高压实验方法和最近的研究成果及进展 ,特别是固体氢的相图、结构和相变 .近十多年来 ,随着超高压技术的发展 ,已能在金刚石对顶砧 (DAC)上产生30 0GPa的静态压力 ,并可进行高压原位实验研究 .对固体氢进行了高压拉曼、同步辐射X射线、光反射和吸收、同步辐射红外光谱等一系列高压物性和相变研究 .从而确定了固体氢的三个相 ,并提出了可能的相结构 .     

New isothermal equation of state of solids applied to high pressures

In the present paper, a new two-parameter inverted equation of state (EOS) is developed which is found to be working very well in the high-pressure region. To check its success and validity, this EOS has been applied in a number of solids. The computed volume compression is found to be in very good agreement with the experimental data in the whole range of pressure in all the solids. The minimum and the maximum pressure range used in the present study is 0–320 kbar and 0–3000 kbar, respectively.     

Comparisons of pharynx, source, formant, and pressure characteristics in operatic and musical theatre singing

Belting, a vocal technique typically cultivated in musical theatre singing, differs timbrally from operatic singing in many interesting respects. The underlying phonatory differences have not been previously investigated in detail. Yet, belting is frequently associated with disturbances of voice function. Articulatory and phonatory characteristics are investigated in a female subject who is a professional singer (co-author JL) trained in both the operatic and belting styles and in an intermediate vocal technique (“mixed”). This article presents data obtained from this subject by video-fiberoptic observation of the pharynx, inverse filtering of airflow, and measurement of subglottal pressure. The results reveal that belting was characterized by very high subglottal pressures and sound levels, and apparently also by a comparatively high degree of glottal adduction. Comparisons with other investigations of related aspects of belting and operatic singing support the assumption that the data obtained from our subject are representative for these vocal techniques.     

室温下压致铁钴镍合金的bcc→hcp相变

 本文采用高压X光衍射方法在金刚石对顶压砧中在位地（in situ）研究了Fe₆₈Co₂₄Ni₈（wt%）合金在室温下的压致bcc→hcp结构相变和直到40.5 GPa的等温压缩行为。实验结果表明该合金在常压下为bcc结构，晶格常数a₀=(0.287 0±0.000 1) nm，体积V₀=(7.119±0.007) cm³/mol，密度ρ₀=(7.981±0.008) g/cm³；在20.9 GPa附近出现bcc→hcp结构相变，两相共存压力区约10 GPa，在此区域内有晶面间距d(002)_hcp=d(110)_bcc，且原子平面(002)_hcp//(110)_bcc，hcp相比bcc相体积减小(0.33±0.02) cm³/mol；高压相hcp结构的晶格参数比值c/a=1.608±0.004；相变后原子配位数的增加使得hcp相(002)平面内及(002)平面间的最近邻原子间距比bcc相最近邻原子间距分别增大约1.6%和0.5%；用Murnaghan状态方程对实验数据进行最小二乘法拟合，得到bcc相B₀=(130±13) GPa，B₀'=12.6±0.5；hcp相V₀=(6.62±0.04) cm³/mol，B₀=(243±21) GPa，B₀'=6.8±0.3；对于该合金的bcc→fcp相变时的结构转变机制做了详细的讨论。