The Pharmaceutical Use of Captisol®: Some Surprising Observations

The purpose of this paper is to share some recent observations on the pharmaceuticaluses and properties of Captisol^® or SBE_7M--CD in controlled porosity osmotic pump tablets (CP-OPT) and the underlying mechanism/sthat lead to apparent zero-order drug release pattern. It would have been simple toattribute the apparent zero-order release mechanism/s of poorly water-soluble drugsfrom CP-OPTs and pellets utilizing Captisol^®as both a solubilizing andosmotic agent, to purely osmotic and diffusional components. However, the mechanismmay be more related to a counterbalancing of physical properties as the concentration of Captisol^®changes within the matrix. Specifically, the initial concentration of Captisol^®within a core is 0.3–0.4M. When this drops to lower values an osmotic pressure drop occurs across the membrane. Therefore, drug release should not follow apparent zero-order kinetics if all the drug is solubilized. However, as the viscosity within the tablet also drops, the apparent diffusion coefficient of both Captisol^® and drug increases. Therefore, it appears that there is an initial resistance (hydraulic pressure) to fluid flow from the tablet through the rate-limiting microporous membrane. This resistance decreases so that even as osmotic pressure and concentration differences drop with time, counterbalancing faster release occurs. Osmotic driving force appears to be the most important initial driving force but a diffusional component becomes more significant with time.     

Ce0.8Y0.2O1.9-Ca3(PO4)2-K3PO4复合电解质在中温区的质子导电性及在常压合成氨中的应用

A precursor of Ce_0.8Y_0.2O_1.9(YDC) solid electrolyte was synthesized by the gol-gel method. YDC and phosphates powders were prepared by mixing the YDC and phosphates according to different weight ratios. The mixtures of the YDC and binary phosphates were ground and sintered at 1 400 ℃. The proton conductivity in solid electrolyte of the sintered samples was examined using electrochemical methods at 400～800 ℃. Ammonia was synthesized from nitrogen and hydrogen at atmospheric pressure in the solid state proton conducting cell reactor. The optimal condition for the ammonia production was determined. The result indicated that composite electrolyte of 80wt% YDC: 20wt% binary phosphates as proton conductor could obtain the highest ionic conductivity and ammonia production rate among the four samples, the rate of evolution of ammonia was up to 9.5 × 10^-9 mol·s^-1·cm^-2.     

源内裂解液相色谱-质谱鉴别人参皂甙砒和拟人参皂甙F11

研究了利用源内碰撞诱导解离（in-source collision—induced dissociation）的高效液相色谱-大气压化学电离质谱（HPLC—APCI／MS）获取人参和西洋参的化学标志物——人参皂甙Rf和拟人参皂甙F11的特征结构信息及鉴别人参和西洋参的方法。在乙腈-水梯度洗脱反相液相色谱及源内碰撞诱导解离条件下，能获得人参皂甙Rf和拟人参皂甙F11的母核离子及去糖基离子的源内碰撞诱导解离谱，从其差别能清楚区分这对同分异构体。本方法对人参皂甙Rf和拟人参皂甙F11的检出限能达到10^-7g柱上样量，简单、快速，单次质谱实验就能鉴别人参和西洋参。     

Formation of Supramolecular Polymers Constructed by Cyclodextrins with Cinnamamide

-Cyclodextrin having cinnamamide at 6- or 3-positions (6-CiNH--CD, 3-CiNH--CD) and -cyclodextrin with cinnamamide on 6-position (6-CiNH--CD) have been prepared. Supramolecular structures were formed in the solid state or aqueous solutions and characterized by measurements of NMR and vapor pressure osmometry (VPO). The results indicate that 6-CiNH--CD formed insoluble supramolecular polymers in the solid state, while 6-CiNH--CD and 3-CiNH--CD formed supramolecular complexes in aqueous solutions. 6-CiNH--CD was found to form a dimer in an aqueous solution. 3-CiNH--CD formed intermolecular complexes to give supramolecular polymers. The differences of the position of guest part on cyclodextrins caused to give a variety of supramolecular structures in aqueous solutions.     

Concentrated electrolyte solutions at high temperatures and pressures

A survey is given of recent experimental results obtained from high-temperature, high-pressure investigations with water, aqueous solutions, and ionic fluids. Data on the static dielectric constant of water to 550°C and 5 kbar are given and discussed with respect to their relation to water structure. Infrared and Raman spectra of HDO in pure water have been obtained to 400°C and 4 kbar, which give information on hydrogen bonding. Xe–H₂O and CO₂–H₂O mixtures were investigated in the infrared. Ni(II) and Cu(II) complexes were investigated by absorption spectroscopy in aqueous solutions of high chloride content to 350°C and 2–6 kbar. The gas-liquid critical point of ammonium chloride was found at 880°C and 1635 bars. This fluid appears to be predominantly ionic even in the critical region. The possibility of converting pure polar fluids such as ammonia and water into concentrated ionic solutions by self-ionization at very high pressures is mentioned.This paper was presented at the symposium, The Physical Chemistry of Aqueous Systems, held at the University of Pittsburgh, Pittsburgh, Pennsylvania, June 12–14, 1972, in honor of the 70th birthday of Professor H. S. Frank.     

Erosion of efficiency in non-uniform linear chromatography

In linear chromatography (i.e. chromatography performed in the absence of sample overloading), when the plate height of a column is roughly uniform along its length, variations in the velocities of solutes are the only possible causes of erosion of efficiency. The sources of these variations (variations in capacity ratio and in the density of the mobile phase, etc.) play no direct role in the erosion of efficiency except through their effect on solute velocities. In other words, what eventually causes the erosion of efficiency is merely variation in the time required for solutes to traverse equally small segments of a column. Significant erosion can only arise from abrupt and deep deceleration of solutes in one or several relatively small segments of a column. If erosion of efficiency caused by pressure gradients in linear SFC is to be large, the depth and the sharpness of the deceleration of a solute must go beyond that hitherto confirmed experimentally. Many relevant examples are analyzed graphically.     

High-pressure phase transition in LiBH4

The high-pressure phase transition from ambient pressure α-LiBH₄ to high-pressure β-LiBH₄ was observed by Raman spectroscopy and X-ray diffraction between 0.8 and 1.1 GPa. The phase boundary between these two phases was mapped over a large range of temperatures using thermal conductivity studies and differential thermal analysis. The structure of the high-pressure phase could not be identified due to small number of experimentally observed reflections, but it was shown that it is different from previously reported theoretical predictions.     

High-pressure structural trends of Group 15 elements: simple packed structures versus complex host-guest arrangements

The Group 15 elements P, As, Sb, and Bi all have layered structures consisting of six-membered rings under ambient conditions and attain the body-centered cubic (bcc) structure at the highest pressures applied. In the intermediate pressure region, however, phosphorus and its heavier congeners behave profoundly differently. In this region P first attains the open packed simple cubic (sc) structure for a wide range of pressures and then transforms into the rarely observed simple hexagonal (sh) structure. For the heavier congeners complex, incommensurately modulated host-guest structures emerge as intermediate pressure structures. We investigated the high-pressure behavior of P and As by ab initio density functional calculations in which pseudopotentials and a plane wave basis set were employed. The incommensurately modulated high-pressure structure of As was approximated by a supercell. Our calculations reproduced the experimentally established pressure stability ranges of the sc and sh structures for P and the host-guest structure for As very well. We found that the sc and especially the sh structure are decisively stabilized by the admixture of d states in the occupied levels of the electronic structure. This admixture releases s-s antibonding states above the Fermi level (s-d mixing). With pressure, s-d mixing increases rapidly for P, whereas it remains at a low level for As. As a consequence, the band energy contribution to the total energy determines the structural stability for P in the intermediate pressure region, giving rise to simple packed structures. On the other hand, in the intermediate pressure region of the heavier Group 15 elements, a delicate interplay between the electrostatic Madelung energy and the band energy leads to the formation of complex structures.     

Structural evolution of (Ca0.35Sr0.65)TiO3 perovskite at high pressures

Lattice parameters of a synthetic powder sample of Ca_0.35Sr_0.65TiO₃ perovskite have been determined by the method of Le Bail refinement, using synchrotron X-ray diffraction patterns collected at pressures up to 15.5 GPa with a membrane-driven diamond anvil cell. At ambient conditions, diffraction data were consistent with the I4/mcm structure reported previously in the literature for the same composition. Diffraction data collected at high pressures were consistent with tetragonal (or, at least, pseudo-tetragonal) lattice geometry, and no evidence was found for the development of any of the orthorhombic structures identified in other studies of (Ca, Sr)TiO₃ perovskites. Additional weak reflections, which could not be accounted for by the normal I4/mcm perovskite structure, were detected in diffraction patterns collected at pressures of 0.9-2.5 GPa, and above ∼13.5 GPa, however. Small anomalies in the evolution of unit cell volume and tetragonal strain were observed near 3 GPa, coinciding approximately with breaks in slope with increasing pressure of bulk and shear moduli for a sample with the same composition which had previously been reported. The anomalies could be due either to new tetragonal↔tetragonal/pseudo-tetragonal phase transitions or to subtle changes in compression mechanism of the tetragonal perovskite structure.     

Free energies of transfer of complexes of the type MCl2py4 between pyridine and other solvent media

Solubility isotherms are reported for the NiCl₂·4py, MnCl₂·4py, and MnCl₂·2py solid pyridinates in a number of pyridine+diluent mixtures at 25°C. Activity coefficients of the solvent components have been derived from the total vapor pressures measured by a static method. The standard free energies of transfer for the NiCl₂py₄ and MnCl₂py₄ complexes are the same, within the experimental error, in the pyridine+aprotic diluent mixtures, while marked differences are observed in the pyridine+chloroform mixtures. Marked deviations are observed for chloroform and 1,2-dichloroethane from a correlation between the standard free energy of transfer of the complexes, on one hand, and the Hildebrand's solubility parameter of the solvent, on the other, the latter correlation being roughly valid for aprotic solvents. The deviations are tentatively ascribed to hydrogen bond formation of the type H... between the protic solvents and the coordinated pyridine molecules, enhanced by the d electron delocalization.