酚醛型氰酸酯与双酚A型环氧共固化反应的FTIR研究

在恒温固化条件下,通过FTIR跟踪方法,研究了酚醛型氰酸酯与双酚A型环氧共固化反应的路径及其反应机理.共固化体系的反应过程包括在150℃及其以下温度,主要发生的是氰酸酯的三嗪环化固化反应,其中三嗪环化固化反应由于环氧的加入,反应速率被极大地提高了;同时,酚醛型氰酸酯中的氨基甲酸酯类杂质与环氧发生开环聚合反应,引起环氧官能团产生弱而持续的消耗.但在此阶段,酚醛型氰酸酯与环氧之间没有化学反应发生;在180℃及其以上温度,三嗪环和环氧发生反应,异构为异氰脲酸环结构,并进一步反应生成唑啉酮环结构,由于该反应的发生,促进了环氧官能团的消耗速度,在环氧官能团的转化率-时间图中,出现倒S曲线;在三嗪环的转化率图中,出现一个极大值后再降落的曲线.反应温度的提高有利于促进酚醛型氰酸酯与环氧之间的共固化反应,特别是当反应温度为220℃时,氰酸酯官能团和环氧官能团的消耗、三嗪环和唑啉酮环的生成均以较快的速率进行,—OCN生成三嗪环的转化率可以较容易地达到1,而唑啉酮环的转化率不超过0.5.     

Preparation and characterization of new thermally stable and optically active poly(ester‐imide)s by direct polycondensation with thionyl chloride in pyridine

4,4′‐hexafluoroisopropylidene‐2,2‐bis‐(phthalic acid anhydride) (1) was reacted with L ‐methionine (2) in acetic acid and the resulting N,N′–(4,4′‐hexafluoroisopropylidenediphthaloyl)‐bis‐L ‐methionine (4) was obtained in high yield. The direct polycondensation reaction of this diacid with several aromatic diols such as bisphenol A (5a), phenolphthalein (5b), 1,4‐dihydroxybenzene (5c), 4,4′‐dihydroxydiphenyl sulfide (5d), 4,6‐dihydroxypyrimidine (5e), 4,4′‐dihydroxydiphenyl sulfone (5f) and 2,4′‐dihydroxyacetophenone (5g) was carried out in a system of thionyl chloride and pyridine. Expecting that the reaction with thionyl chloride in pyridine might involve alternative intermediates different from an acyl chloride, the polycondensation at a higher temperature favorable for the reaction of the expected intermediate with nucleophiles was attempted, and a highly thermally stable poly(ester‐imide) was obtained by carrying out the reaction at 80°C. All of the above polymers were fully characterized by ¹H‐NMR, ¹⁹F‐NMR FT‐IR spectroscopy, elemental analysis and specific rotation. Some structural characterization and physical properties of these optically active poly(ester‐ imide)s are reported. Copyright © 2006 John Wiley & Sons, Ltd.     

A novel and green protocol for two-carbon homologation: a direct amino acid/K2CO3-catalyzed four-component reaction of aldehydes, active methylenes, Hantzsch esters and alkyl halides

A novel and green approach for the two-carbon homologation of aldehydes using amino acid catalysis has been developed and further extended to the generation of pharmaceutically active cyano-esters via four-component reactions in one-pot.     

磷酰氨基酸的酯交换反应研究

本文利用^3^1P NMR , 对比研究了磷酰化组氨酸与其它磷酰化氨基酸和一级醇的磷上酯交换的反应速度,实验表明磷酰化组氨酸的反应速度最快. 由此提出了以下机理:由于咪唑环的参与,磷可以形成六配位过渡态,从而加快了反应速度.     

Identification of anhydroecgonine methyl ester N-oxide,a new metabolite of anhydroecgonine methyl ester,using electrospray mass spectrometry

Cocaine is transformed into hepatotoxic metabolites through oxidative pathways. For anhydroecgonine methyl ester (AEME), the main constituent in crack smoke, the oxidative metabolism has not been studied. Therefore, incubation of AEME with rat liver microsomes was performed and a metabolite of AEME, anhydroecgonine methyl ester N-oxide (AEMENO), was identified. The chemical structure of this new metabolite was confirmed by synthesis and by comparative interpretation of electrospray multiple-stage mass spectra, which were obtained in the positive ion mode. This metabolite was also detected in whole blood, serum and urine samples from crack users. The application of liquid chromatography/electrospray mass spectrometry or nanoelectrospray mass spectrometry was necessary because AEMENO is susceptible to thermal degradation during gas chromatographic/mass spectrometric analysis. This study demonstrated that AEMENO is produced by rat hepatic microsomal metabolism in vitro and is present in body fluids from crack users.     

An improved method of characterizing fatty acids by equivalent chain length values

A method has been developed for calculating more accurate and reproducible equivalent chain length (ECL) values of 33 straight-chain fatty acids (FA), with various positions and numbers of cis double bonds, chromatographed on DB-Wax and DB-1 columns. The dependence of ECL values on the position and the number of double bonds is described, as is a method of utilizing these relationships for the characterization of FA by gas chromatography.     

二氢茉莉酮酸甲酯的简便合成方法

本文报道二氢茉莉酮酸甲酯的简便合成方法。先由丁二酸和庚酰氯反应得到2-戊基-1,3-环戊二酮(1),再用甲醇醚化1,可得到2-戊基-3-甲氧基-环戊-2-烯酮(2)。2与丙二酸二甲酯反应生成(2-戊基-3-酮-1-环戊烯-)基乙酸甲酮(3)。最后,催化氢化3,便可得到二氢茉莉酮酸甲酯(4)。     

Soluble, thermally stable poly(ester amide)s derived from terephthalic acid bis(carboxydiphenyl methyl)ester and different diamines

Terephthalic acid bis(carboxydiphenyl methyl)ester (TBE) as a new monomer for the preparation of polyamides was synthesized through the nucleophilic substitution reaction of benzilic acid with terephthaloyl chloride. This diester-diacid (TBE) was characterized using conventional spectroscopic methods. Polycondensation reactions of TBE with different aromatic and semi-aromatic diamines via Yamazaki method resulted different poly(ester amide)s. All the polymers were characterized and their physical and thermal properties were studied.     

Simple test system for single molecule recognition force microscopy

We have established an easy-to-use test system for detecting receptor-ligand interactions on the single molecule level using atomic force microscopy (AFM). For this, avidin-biotin, probably the best characterized receptor-ligand pair, was chosen. AFM sensors were prepared containing tethered biotin molecules at sufficiently low surface concentrations appropriate for single molecule studies. A biotin tether, consisting of a 6 nm poly(ethylene glycol) (PEG) chain and a functional succinimide group at the other end, was newly synthesized and covalently coupled to amine-functionalized AFM tips. In particular, PEG₈₀₀ diamine was glutarylated, the mono-adduct NH₂-PEG-COOH was isolated by ion exchange chromatography and reacted with biotin succinimidylester to give biotin-PEG-COOH which was then activated as N-hydroxysuccinimide (NHS) ester to give the biotin-PEG-NHS conjugate which was coupled to the aminofunctionalized AFM tip. The motional freedom provided by PEG allows for free rotation of the biotin molecule on the AFM sensor and for specific binding to avidin which had been adsorbed to mica surfaces via electrostatic interactions. Specific avidin-biotin recognition events were discriminated from nonspecific tip-mica adhesion by their typical unbinding force (∼40 pN at 1.4 nN/s loading rate), unbinding length (<13 nm), the characteristic nonlinear force-distance relation of the PEG linker, and by specific block with excess of free d-biotin. The convenience of the test system allowed to evaluate, and compare, different methods and conditions of tip aminofunctionalization with respect to specific binding and nonspecific adhesion. It is concluded that this system is well suited as calibration or start-up kit for single molecule recognition force microscopy.     

The Synthesis of Some New N‐[1‐(2,5‐Dichlorophenyl)‐5‐Methyl‐1,2,3‐Triazol‐4‐yl]‐Carbamic Acid Ester Derivatives

The synthesis of some new N‐[1‐(2,5‐dichlorophenyl)‐5‐methyl‐1,2,3‐triazol‐4‐yl]‐carbamic acid ester derivatives are reported in this paper. The yielded products 6a‐l were confirmed by Elemental analyses, NMR, MS, and IR spectra.