浅谈环境水质分析结果的审核工作

对分析结果的有效数字和数据之间的合理性关系问题从理论上进行了研究,为数据审核工作提供科学参考。     

Experimental Considerations for Temperature Modulated DSC at Low Temperature

Temperature modulated DSC (TMDSC) at low temperatures requires attention to the selection of experimental parameters that are within the capability of the instrumentation as well as special care in calibration of heat capacity measurement when high precision is required. Data are presented to facilitate selection of appropriate modulation periods and amplitudes at low temperature when using a mechanical cooling accessory. The standard error of the mean heat capacity measurement for a sapphire standard increased with decreasing temperature, decreasing period, and increasing pan mass. For ice in hermetically sealed pans, the standard error of the mean heat capacity measurement was larger than for sapphire and did not follow a predictable trend with changes in temperature and period of modulation. This was attributed to changes in sample geometry between successive measurements due to melting and resolidification. A simple one-point temperature calibration by TMDSC may be unsuitable for precise measurement of heat capacity because of the random error caused by sample placement and the systematic error caused by cell asymmetry, temperature dependence of the calibration constant, and different sample thermal conductivities. An alternative calibration procedure using standard DSC and either a linear or second order fit of the calibration constant over the temperature range of interest is proposed. This revised version was published online in August 2006 with corrections to the Cover Date.     

The evaluation of the repeatability of the 13C-ketoisocaproate breath test for assessing hepatic mitochondrial function

The ¹³C-ketoisocaproate (¹³C-KICA) breath test (BT) has been recently proposed as a non-invasive test for assessing hepatic mitochondrial function. Results of the ¹³C-KICA BT can be expressed as different parameters. However, the best parameter for expressing the ¹³C-KICA BT result is uncertain which hinders use of the BT in routine clinical practice. We have investigated the repeatability of different parameters of ¹³C-KICA BT. Thirteen healthy adult subjects (5 men and 8 women) underwent a ¹³C-KICA BT on two occasions separated by a gap of approximately 30 days. There were no significant differences between the repeated measurements for all the test parameters over 30 days. Furthermore, the Bland Altman statistics showed no fixed or proportional bias for any of the test parameters. The cumulative ¹³C-dose enrichment over 60 min had the lowest within-subject variability of 12% compared to all other test parameters. The cumulative ¹³C-dose enrichment over 60 min could be a very useful parameter for the ¹³C-KICA BT to detect impaired hepatic mitochondrial function in patients with chronic liver diseases.     

基于粒子辅助水滴模板法制备仿生复眼结构的研究

将微粒“皮克林乳化效应”(Pickering emulsions)和水滴模板法(breath figure method)有机结合,探索通过建立粒子辅助的水滴模板法,实现纳米粒子在蜂窝状多孔膜内壁的自组装复合,构建微纳复合的多级仿生结构.并进一步利用聚二甲基硅氧烷(PDMS)复制转移技术,获得类似于复眼结构的多级微纳复合界面仿生结构.     

Regional homogeneity of resting-state fMRI contributes to both neurovascular and task activation variations

The task induced blood oxygenation level dependent signal changes observed using functional magnetic resonance imaging (fMRI) are critically dependent on the relationship between neuronal activity and hemodynamic response. Therefore, understanding the nature of neurovascular coupling is important when interpreting fMRI signal changes evoked via task. In this study, we used regional homogeneity (ReHo), a measure of local synchronization of the BOLD time series, to investigate whether the similarities of one voxel with the surrounding voxels are a property of neurovascular coupling. FMRI scans were obtained from fourteen subjects during bilateral finger tapping (FTAP), digit–symbol substitution (DSST) and periodic breath holding (BH) paradigm. A resting-state scan was also obtained for each of the subjects for 4 min using identical imaging parameters. Inter-voxel correlation analyses were conducted between the resting-state ReHo, resting-state amplitude of low frequency fluctuations (ALFF), BH responses and task activations within the masks related to task activations. There was a reliable mean voxel-wise spatial correlation between ReHo and other neurovascular variables (BH responses and ALFF). We observed a moderate correlation between ReHo and task activations (FTAP: r = 0.32; DSST: r = 0.22) within the task positive network and a small yet reliable correlation within the default mode network (DSST: r = − 0.08). Subsequently, a linear regression was used to estimate the contribution of ReHo, ALFF and BH responses to the task activated voxels. The unique contribution of ReHo was minimal. The results suggest that regional synchrony of the BOLD activity is a property that can explain the variance of neurovascular coupling and task activations; but its contribution to task activations can be accounted for by other neurovascular factors such as the ALFF.     

Biomedical Application of an Isotope Selective Nondispersive Infrared Spectrometer for 13CO2 and 12CO2 Concentration Measurements in Breath Samples

A newly developed isotope selective nondispersive infrared (NDIR) spectrometer for the measurement of ¹³CO₂ and ¹²CO₂ concentrations in breath samples was applied as a low cost and very simple to operate alternative to isotope ratio mass spectrometry (IRMS). We used this device for several biomedical applications ([¹³C]urea breath test, [¹³C]leucine metabolism, [¹³C]methacetin catabolism of rats) and found that the results agree very well with IRMS.     

Production of 13C Labelled Pea Flour for Use in Human Digestion and Fermentation Studies

Abstract

Stable isotope breath tests offer a new approach to the study of digestion and fermentation of carbohydrates in man. In this study, ¹³C labelled peas were grown by pulsing 250ml ¹³CO₂ into a sealed growth chamber. A second pulse was added to a portion of the peas to increase the ¹³C enrichment. This generated pea flour with an enrichment of 2.36 at.% excess (range 2.09–2.71 n = 3) and 8.64 atom % excess (range 7.37–9.78 n = 3) respectively. This represented incorporation of an absolute yield of 3.8% of the ¹³CO₂ into peas in the ‘once-labelled’ treatment and 7.5% in the ‘twice-labelled’ treatment. Ingestion of a mixture of the labelled pea flour (300 mg) by two volunteers generated measurable ¹³CO₂ excretion for breath test analysis. The profile of breath ¹³CO₂ enrichment increased to a maximum within three hours after consuming the pea flour followed by a decrease almost back to baseline by 13 hours. Breath ¹³CO₂ appeared to rise again after this apparent nadir at 13 hours until the end of the sampling period. Mathematical analysis of the data suggested that two peaks best described the profile of breath ¹³CO₂ up to 13 hours. A third peak was necessary to describe the late rise in breath ¹³CO₂ enrichment. This use of ¹³C enriched pea flour may provide a useful non invasive method for measurement of digestion and fermentation in vivo.     

Orientation relationship in various 9%Cr ferritic/martensitic steels–EBSD comparison between Nishiyama–Wassermann,Kurdjumov–Sachs and Greninger–Troiano

EBSD measurements were carried out on four different martensitic steels (T91, P92, EM10 and Eurofer) in various metallurgical conditions (nine different microstructural states). The usual orientation relationships (ORs) between the parent austenitic phase and the resulting martensite in martensitic steels are those of Nishiyama–Wassermann (NW) and Kurjumov–Sachs (KS). The present study first proposes a methodology based on the combined analysis of the misorientation distribution, the pole figures (PFs) and the angle/axis pairs. This methodology leads to the conclusion that neither NW nor KS relationships are able to account for all the features observed whatever the material under study. A third OR proposed by Greninger and Troiano (GT) proves to describe the relationship between austenite and ferrite in all four different martensitic steels much more accurately.