Preconcentration of lead,cadmium, copper and zinc in water at the pg g−1 level by non-boiling evaporation

An evaluation of the non-boiling evaporation technique for the preconcentration of Pb, Cd, Cu, Zn at the pg g^?1 level in water samples is presented. Various improvements were made to allow efficient control of contamination problems at these extremely low concentrations. They include the choice of FEP Teflon for the evaporation containers and the use of sophisticated cleaning, ageing and pre-conditionning procedures. Detailed calibration graphs were obtained down to the sub-pg g^?1 level by processing ultra-low concentration standards. This technique was then applied to the determination of these four metals in snow samples collected in Greenland and Antarctica.     

Evaluation of an on-line coupled continuous flow liquid membrane extraction and precolumn system as trace enrichment technique by liquid chromatographic determination of bisphenol A

An on-line coupled continuous flow liquid membrane extraction (CFLME) and C₁₈ precolumn system was developed for sample preconcentration in liquid chromatography determination. After preconcentration by CFLME, which is based on the combination of continuous flow liquid–liquid extraction and supported liquid membrane, bisphenol A (BPA) was enriched in 960 μl of 1 mol l⁻¹ NaOH used as acceptor. This acceptor was on-line neutralized and transported onto the C₁₈ precolumn where analytes were absorbed and focused. Then the focused analytes were injected onto a C₁₈ analytical column for separation and detected at 220 nm with a diode array detector. CFLME related parameters such as flow rates, pH of donor and acceptor, and enrichment time were optimized. The proposed method presents a detection limit of 0.03 μg l⁻¹ (S/N=3) when 60 ml samples was enriched with an enrichment time of 30 min. Compared with C₁₈ based column-switching procedure, this proposed procedure presents similar sample throughput and lower detection limits. The proposed method was successfully applied to determine BPA in tap water, river water, and municipal sewage effluent samples.     

Electrochemical determination of dopamine and ascorbic acid at a novel gold nanoparticles distributed poly(4-aminothiophenol) modified electrode

A modified electrode is fabricated by embedding gold nanoparticles into a layer of electroactive polymer, poly(4-aminothiophenol) (PAT) on the surface of glassy carbon (GC) electrode. Cyclic voltammetry (CV) is performed to deposit PAT and concomitantly deposit Au nanoparticles. Field emission transmission electron microscopic image of the modified electrode, PAT-Au_nano-ME, indicates the presence of uniformly distributed Au nanoparticles having the sizes of 8-10 nm. Electrochemical behavior of the PAT-Au_nano-ME towards detection of ascorbic acid (AA) and dopamine (DA) is studied using CV. Electrocatalytic determination of DA in the presence of fixed concentration of AA and vice versa, are studied using differential pulse voltammetry (DPV). PAT-Au_nano-ME exhibits two well defined anodic peaks at the potential of 75 and 400 mV for the oxidation of AA and DA, respectively with a potential difference of 325 mV. Further, the simultaneous determination of AA and DA is studied by varying the concentration of AA and DA. PAT-Au_nano-ME exhibits selectivity and sensitivity for the simultaneous determination of AA and DA without fouling by the oxidation products of AA or DA. PAT and Au nanoparticles provide synergic influence on the accurate electrochemical determination of AA or DA from a mixture having any one of the component (AA or DA) in excess. The practical analytical utilities of the PAT-Au_nano-ME are demonstrated by the determination of DA and AA in dopamine hydrochloride injection and human blood serum samples.     

Ion-selective electrode for gallium determination in nickel alloy, fly-ash and biological samples

A poly(vinyl chloride)-based membrane of 2,9-dimethyl-4,11-diphenyl-1,5,8,12-tetraazacyclotetradeca-1,4,8,11-tetraene (DDTCT) with sodium tetraphenyl borate (STB) as an anion excluder and dibutyl phthalate (DBP), dibutyl butylphosphonate (DBBP), tris(2-ethylhexyl) phosphate (TEP) and tributyl phosphate (TBP) as plasticizing solvent mediators was prepared and investigated as a Ga(III)-selective electrode. The best performance was observed with the membrane having the ligand-PVC-DBP-STB composition 1:4:1:1, which worked well over a wide concentration range (1.45 × 10⁻⁶ to 0.1 mol L⁻¹) with a Nernstian slope of 28.7 mV per decade of activity between pH 4.0 and 10.0. This electrode showed a fast response time of 12 s and was used over a period of 100 days with good reproducibility (s = 0.3 mV). The selectivity coefficients for monovalent, divalent and trivalent cations indicate excellent selectivity for Ga(III) ions over a large number of cations. Anions such as Cl⁻ and SO₄²⁻ do not interfere and the electrode also works satisfactorily in partially water-alcohol medium. The practical utility of the membrane sensor has also been observed in solutions contaminated with detergents, i.e., cetyltrimethylammonium bromide and sodium dodecyl sulfate and used for the determination of gallium in nickel alloy, fly-ash and biological samples.     

微波增压溶样-石墨炉原子吸收光谱法同时测定植物性样品中微量铅镉

使用微波增压溶样法，将样品用HNO3—HClO4溶解后，用石墨炉原子吸收光谱法同时测定植物性样品中铅和镉。以磷酸二氢铵—硝酸镁作为基体改进剂，可使灰化温度大大提高，克服了基体的干扰。铅和镉的回收率分别为95．3％—104．8％和96．2％—105．5％，RSD分别为4．8％-7．2％和4．3％-7．6％。     

HPLC determination of urinary 2,4- and 2,6-toluendiamines as potential degradation products of polyurethane breast implants

Summary A reversed-phase HPLC method has been developed for the urinary determination of mutagenic 2,4- and 2,6-toluendiamines. These amines are degradation products of polyurethane, a material used to cover textured silicone breast implants. FMOC-Cl was used as fluorescent derivatising agent in order to obtain a limit of detection of 15 ng/ml in urine. Pre-treatment of urine samples was by liquid/liquid extraction and urine specimens of patients after surgury were analysed.     

Kinetic Analysis of Cobalt in Veterinary Products

A novel kinetic method for the determination of trace amounts of Co(II) has been developed. The proposed method based on the catalytic effect of Co(II) on the oxidation of xylenol orange tetra sodium salt by H₂O₂ in the presence of cationic surfactant (N‐dodecylpyridinium chloride). Co(II) at μg.mL^?1 was determined spectrophotometrically by measuring the decrease in the absorbance of xylenol orange at 577 nm by the differential method. The method is precise, selective, and sensitive. The detection limit of the procedure was 0.058 μg.mL^?1. The relative standard deviation for the replicate determination (n = 6) of 0.7 μg.mL^?1 was 1.285%. The results compared satisfactorily with those of atomic absorption spectrometry. The method was successful for the analysis of Co(II) in veterinary and synthetic samples.     

Determination of rhodium in water samples using cloud point extraction (CPE) coupled with flame atomic absorption spectrometry (FAAS)

Cloud point extraction was applied as a method for preconcentration of rhodium after formation of a complex with 2-propylpiperidine-1-carbodithioate (2-PPC), and later determined by flame atomic absorption spectrometry using TritonX-114 as surfactant. Rhodium was complexed with 2-PPC in an aqueous phase and kept for 15 min in a thermostatted bath at 40 °C. Separation of the two phases was accomplished by centrifugation for 15 min at 4000 rpm. The chemical variables affecting the cloud point extraction were optimized and successfully applied to rhodium determination in various water samples. Under optimized conditions, the preconcentration system (100 mL sample) permitted an enhancement factor of 50. The detection limits obtained under optimal conditions was 0.052 ng mL⁻¹. The extraction efficiency was investigated at different rhodium concentrations (7.0–42.0 μg mL⁻¹), and good recoveries (96.42–99.14%) were obtained using this method. It has been applied to the determination of rhodium in water and was compared with reported methods in terms of Student’s ‘t’-test and variance ratio ‘f’-test.     

β-Cyclodextrin-polyurethane polymer as solid phase extraction material for the analysis of carcinogenic aromatic amines

β-Cyclodextrin-polyurethane (β-CDPU) polymer was synthesized by the reaction of β-cyclodextrin with hexamethylene diisocyanate in dry dimethylformamide and used as a sorbent for the solid phase extraction (SPE) of carcinogenic aromatic amines from water. The polymers were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry and particle size analysis. The separation and quantification was performed by Liquid chromatography with RP-C₁₈ column and diode array detection using standard arylamines for quantification. When compared with commercially available sorbents, β-CDPU gave better recovery for the aromatic amines. From the variation of pH of the extractant from 4.0 to 8.5 recovery was highest at pH 8.5. The breakthrough volume has been ascertained to be 100 ml for 200 mg of the resin. The new SPE material offers better recovery and estimation of banned arylamines.     

Online preconcentration system for determining ultratrace amounts of Cd in vegetal samples using thermospray flame furnace atomic absorption spectrometry

A system has been developed for online preconcentration and determination of Cd using thermospray flame furnace atomic absorption spectrometry (TS-FF-AAS). It is based on the solid-phase extraction of Cd in an Amberlite XAD-2 minicolumn loaded with 2-(2-thiazolylazo)-5-dimethylaminophenol (TAM), and the metal ion is eluted with 1 mol L⁻¹ hydrochloridric acid, followed by its determination. The online system allows determining Cd with a detection limit of 8.0 ng L⁻¹ and a quantification limit of 25.0 ng L⁻¹. The precision (repeatability), calculated as the relative standard deviation (% RSD) in sample solutions containing 0.5 and 3.0 μg L⁻¹ of Cd, was 6.1 and 4.5%, respectively. The preconcentration factor obtained was 24. The system’s accuracy was confirmed by analyzing the following certified reference materials (CRMs): Rice flour NIES 10b, Apple leaves NIST 1515 and Orchard leaves NBS 1571. This procedure was applied to the determination of Cd in cabbage and powdered guarana samples.