Combined use of Pd and HF as chemical modifiers for the determination of total chromium in produced waters from petroleum exploration by ET AAS

This work reports the evaluation of the combined use of Pd and HF as chemical modifiers for the direct determination of total chromium in waters derived from petroleum exploration employing electrothermal atomic absorption spectrometry (ET AAS). Such waters, usually called as produced waters, have complex composition presenting a number of organic and inorganic substances. When obtained from offshore operations they also present high salinity. In order establish conditions for chromium measurement pyrolysis and atomization curves were built up in different media and employing Pd and HF as chemical modifiers. Also, a detailed study about calibration strategy was performed. At best conditions, pyrolysis and atomization temperatures were 1200 °C and 2600 °C, respectively, and 10 μL of a 500 mg L^− 1 Pd solution was added together with 10 μL of a 50% (v/v) HF solution on 20 μL of sample. Obtained results indicate that, in this kind of sample, chromium can be determined by standard addition method or employing external calibration with standard solutions prepared in 0.8 mol L^− 1 NaCl medium. In order to evaluate the accuracy of the procedure, a recovery test was performed with seven spiked samples of produced waters. The detection limit, quantification limit and the relative standard deviation in 0.8 mol L^− 1 NaCl were also calculated and the values found were 0.45 μg L^− 1, 1.5 μg L^− 1 and 6.0% (at 2.5 μg L^− 1 level), respectively.     

Preparation of antibodies and development of a sensitive immunoassay with fluorescence detection for triazine herbicides

Specific polyclonal antibodies against s-triazine herbicides were obtained by preparing immunogens coupling home-synthesized haptens derivatives of simazine (6-chloro-N-ethyl-N′-ethyl-1,3,5-triazine-2,4-diamine) to lysine groups of hemocyanin from keyhole limpets and bovine serum albumin carrier proteins. Three highly sensitive rabbit antisera were obtained and evaluated with a battery of six enzyme tracers derived from triazine structures in an optimized ELISA format. The antiserum As8 and the HRP-2f tracer, which yield the best assay sensitivity for simazine (detection limit 0.11 ± 0.02 μg L⁻¹, IC₅₀ 0.88 ± 0.04 μg L⁻¹), were applied to the development of a sensitive flow-through immunoassay for the analysis of this herbicide. The automated assay was based on a direct competitive immunosorbent assay and fluorescence detection. The optimized method presents an IC₅₀ value of 0.35 ± 0.04 μg L⁻¹ with a detection limit of 1.3 ± 0.9 ng L⁻¹ and a dynamic range from 0.010 to 7.5 μg L⁻¹ simazine. The generic nature of the antiserum was shown by good relative cross-reactivities with other triazines such as atrazine (420%) or propazine (130%) and a lower response to terbutylazine (6.4%) and desethyl-atrazine (2.2%). No cross-reactivity was obtained for nonrelated pesticides such as 2,4-dichlorophenoxyacetic acid or linuron and the assay could be applied as a screening method for triazine herbicides. The total analysis time was 30 min per determination and the immunosensor could be reused for more than 150 cycles without significant loss of activity. The immunosensor has been successfully applied to the direct analysis of simazine in surface water samples at the nanogram per liter level. The results obtained by comparative analysis of the immunosensor with a chromatographic procedure for triazines showed a close correspondence.     

Multifunctional sorbents for the extraction of pesticide multiresidues from natural waters

In this work multifunctional sorbents, based on surfactant-coated mineral oxides, are assessed for the simultaneous extraction/preconcentration of pesticide multiresidues from aqueous environmental samples. Seventeen pesticides, representative of all the common groups (triazines, phenylureas, carbamates, azols, anilides, chloroacetanilides, organophosphorous, phenoxyacids, aryloxy acids and phenols), are selected for this study. The sorbents assessed are pure sodium dodecyl sulphate (SDS) and mixed tetrabutylammonium (TBA)-SDS hemimicelles and/or admicelles adsorbed onto alumina. Because of their multifunctional character, these sorbents provide different retention mechanisms (i.e. hydrophobic, ionic and/or π-cation interactions), which highly contribute to the efficient retention of pesticides with different polarities and acidities (bases, neutrals and acids). In addition, the low volume of eluent required for complete elution of analytes (typically 1-2 mL) avoided the need of using time-consuming and tedious evaporation steps that generally are needed when cross-linked polymeric resins or carbon materials are used as sorbents. The performance of two sorbents, i.e. SDS and TBA-SDS mixed hemimicelles/admicelles, for the admicellar solid-phase extraction (ASPE) of pesticide multiresidue was comparatively investigated. The latter was selected on the basis of the higher breakthrough volumes permitted, the lower volume of eluent required and the higher sample and eluent flow rates allowed. The proposed ASPE/LC/UV approach provided detection limits lower than 100 ng L⁻¹ for the determination of the 17 pesticides tested. Recoveries from spiked (at the ng L⁻¹ level) river and underground water samples was quantitative for most of the pesticides tested.     

Variability in different antimony,arsenic and chromium species in waters and bottom sediments of three water reservoirs in Upper Silesia (Poland): a comparative study

Migration of metals/metalloids and their inorganic forms from bottom sediments into waters and from waters into bottom sediments is a complex process. Understanding this mechanism is essential for recognising transformations that occur in water reservoir ecosystems. The following research was conducted in 2012–2014. The aim was to define the time and spatial correlations in the changes of total and ionic antimony, arsenic and chromium concentrations in waters and bottom sediments of three water reservoirs located in Upper Silesia (Poland), i.e. P?awniowice, Rybnik and Gocza?kowice. The ionic form contents were determined with high-performance liquid chromatography-inductively coupled plasma-mass spectrometry (HPLC-ICP-MS). The research was carried out to verify whether the bottom sediments deposited in the discussed reservoirs could have posed an environmental threat due to the possible release of toxic ionic forms (i.e. As(III), Sb(III) and Cr(VI)) into the pelagic zone. The comparison of the research results obtained for three reservoirs (being under different anthropopressure influence) enabled the researchers to describe the bioavailability of specific elements and their species. It also helped to discern the existing environmental threats for such water reservoirs and their users.     

Development of a selective optical sensor for Cr(VI) monitoring in polluted waters

An optical sensor is described for the sensitive and selective determination of the Cr(VI) ion in aqueous solutions. The optode membrane is prepared by incorporating Aliquat 336 as an ionophore and a chromoionophore (4',5'-dibromofluorescein octadecyl ester) in a poly(vinyl chloride) (PVC) membrane containing ortho-nitrophenyloctyl ether (o-NPOE) as a plasticizer. The response to Cr(VI) is indicated by co-extraction of the target species and of hydrogen ions into the bulk of the membrane yielding large absorbance changes which can easily be measured in the visible spectral range. The optode membrane shows a reversible response in the concentration range of 1.1x10(-5)-1.0x10(-3) M and has been shown to be more selective towards the HCrO4(-) ion than other anions with a selectivity pattern HCrO4(-) > SCN- approximately = ClO4(-) > NO3(-) approximately = I- approximately = NO2(-) > H2PO4(-) approximately = Cl- approximately = SO4(2-). The sensing method developed has successfully been applied to the determination of Cr(VI) in spiked river water as well as in electroplating rinse waters.     

Flow-through solid-phase reflectometric method for simultaneous multiresidue determination of nitrophenol derivatives

In this paper, a flow-through optosensor based on diffuse reflectance spectroscopy and multivariate regression modelling is proposed for simultaneous multiresidue determination of trace level concentrations of nitro-substituted phenols. The optrode integrates on-line anion-exchange sorptive preconcentration and matrix removal with direct detection of sorbed species onto the sensing layer and chemometric deconvolution of overlapped spectra. After recording of the reflectometric spectrum, fast chemosensor regeneration is accomplished with an acidic methanolic eluent followed by a metered volume of alkaline solution. The full automation of the analytical procedure is ensured by flow-programming as executed via a software-controlled multisyringe pump and a set of multiposition and solenoid valves.

Under the optimized chemical and physical variables, the 3σ_blank detection limits for 2-, and 4-nitrophenol and 2,4-dinitrophenol were 0.69, 0.42 and 0.37 μg L⁻¹, respectively, for a sample loading volume of 4.0 mL with enrichment factors of 73, 74 and 81, respectively, and repeatability better than 3.0%. The analytical applicability of the optosensing system was asserted by the satisfactory results attained in its application to monitoring of nitrophenol derivatives in spiked environmental waters including highly saline matrices via the standard additions method.     

Comparison of preconcentration methods for nontargeted analysis of natural waters using HPLC-HRMS: Large volume injection versus solid-phase extraction

Nontargeted analysis of water samples using liquid chromatography combined with high-resolution mass spectrometers is an emerging approach for surface water monitoring and evaluation of water treatment processes. In this study, sample preconcentration via direct, large volume injection with 500 μL and 1000 μL injection volumes was compared to SPE regarding analytical performance parameters in targeted and nontargeted workflows. In targeted analysis, the methods were evaluated in terms of LOD and intrabatch precision of the selected compounds, whereas in nontargeted analysis, the number of detected unknown compounds, the method's intra-batch precision, and the retention time versus molecular mass pattern of the detected unknowns were evaluated. In addition, a novel intensity drift correction method was developed that is not based on quality control samples and makes use of the signals obtained for continuously infused reference compounds, which are conventionally utilized for online mass drift correction. It could be demonstrated that the new correction method significantly reduced the bias introduced by instrumental drift and is important for the reliable intercomparison of different nontargeted methods. Intercomparison of results showed that the 1000 μL large volume injection method revealed the best performance in terms of precision under repeatability conditions of measurement as well as lower LODs for targeted compound analysis. In nontargeted analysis, the SPE method detected a higher number of unknown compounds but exhibited also a higher uncertainty of measurement caused by matrix effects.     

Uncovering seasonal patterns of 56 pesticides in surface coastal waters of the Ria Formosa lagoon (Portugal), using a GC-MS method

This study describes the simultaneous quantification of 56 pesticides in surface coastal water, supported by the development and validation of a gas chromatography (GC)–ion trap (IT) mass spectrometry (MS) method. Samples (500 mL) were pre-concentrated 2500 times by solid phase extraction (OASISTMHLB). The compounds were identified and quantified, within 35 minutes, by GC tandem mass spectrometry (GC-MS/MS) and GC-MS, respectively. The methodology proved to be highly specific for all target pesticides, with an average linearity of 0.99. Detection limits and recovery rates ranged from 0.4 to 1.3 ng L^?1 and 71% to 120%, respectively. The performance of the method was checked using water samples collected from nine sampling sites along the Ria Formosa Lagoon Natural Park (south of Portugal, n = 54) in each season (2010). The total annual concentrations of all pesticides in each category (fungicides, herbicides and insecticides) were 1.4, 0.6 and 9.0 µg L^?1, respectively. Moreover, 89% of the pesticides tested for were detected, 84% could be quantified and 25% had concentrations above the European recommended levels (2013/39/EU). The highest total loads of pesticides were found in the spring, which is in agreement with their seasonal application. Physicochemical parameters such as, nitrites, nitrates, ammonia and phosphates, also indicate poor water quality, supporting the fact that the Ria Formosa lagoon actually needs an effective monitoring programme for effective preservation of its natural reserve status.     

Ionic‐liquid‐based dispersive liquid–liquid microextraction combined with high‐performance liquid chromatography for the determination of multiclass pesticide residues in water samples

Ionic‐liquid‐based dispersive liquid–liquid microextraction in combination with high‐performance liquid chromatography and diode array detection has been proposed for the simultaneous analysis of four multiclass pesticide residues including carbaryl, methidathion, chlorothalonil, and ametryn from water samples. The major experimental parameters including the type and volume of ionic liquid, sample pH, type, and volume of disperser solvent and cooling time were investigated and optimum conditions were established. Under the optimum experimental conditions, limits of detection and quantification of the method were in the range of 0.1–1.8 and 0.4–5.9 μg/L, respectively, with satisfactory enrichment factors ranging from 10–20. The matrix‐matched calibration curves, which were constructed for lake water, as a representative matrix were linear over wide range with coefficients of determination of 0.996 or better. Intra‐ and interday precisions, expressed as relative standard deviations, were in the range of 1.1–9.7 and 3.1–7.8%, respectively. The relative recoveries of the spiked environmental water samples at one concentration level were in the range of 77–102%. The results of the present study revealed that the proposed method is simple, fast, and uses environmentally friendly extraction solvent for the analysis of the target pesticide residues in environmental water samples.