Geometry and electronic structure of a heterometallic cluster Mo<Subscript>2</Subscript>Mg<Subscript>2</Subscript> in different oxidation states of Mo: a DFT study

Reduction of tetranuclear heterometallic complex Mo₂Mg₂ was simulated using the B3LYP and PBE density functional methods. The results of geometry calculations of the initial complex [Mo^VIO₂Mg(MeOH)₂(OMe)₄]₂ and a partially reduced Mo^V complex are in good agreement with experimental data. The reduced Mo^III complex is characterized by a decrease in the binding energy of aqua ligands. Structural rearrangement of the complex with release of a coordination position at the Mo atoms requires small energy expenditure. One can assume that the reduction of the polynuclear complex causes overcrowding of its coordination sphere, which favors formation of dinitrogen complexes. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 441–457, March, 2008.     

虚拟技术在实验教学中的应用

介绍了虚拟技术在实验教学改革中的作用与意义，探讨了电子信息系统实验教学改革的新思路与实现措施，并总结了实验教学改革的初步成果．     

等厚双层涂层材料受集中力作用的平面问题理论解

界面应力的正确评价是分析薄膜涂层材料力学特性的难题之一。利用镜像点法和Dirichlet等值性原理，本文推导了等厚双层薄膜涂层材料受表面集中力作用的平面问题理论解。该显式理论解是以固定在各镜像点上的局部坐标系下的Goursat应力函数的形式给出的。对应于高阶镜像点的应力函数，可通过递推的方法，从对应于低阶镜像点的应力函数求得，而且也易于计算机编程。随着镜像点阶数的增大，它与界面的距离也越来越大，因而相对应的应力函数对界面应力的影响越来越小。最后的算例表明，只需考虑前面有限个镜像点，便可获得足够精度的解。该理论解可作为格林函数，以求解复杂问题的理论解，也可用作边界元法的基本解，提高数值计算的精度和效率。     

HUA’S THEOREM WITH FIVE ALMOSTE QUAL PRIME VARIABLES

§1. IntroductionIn the additive theory of prime numbers, one studies the representation of positive in-tegers by powers of primes. For the quadratic case, Hua [1] proved that each large integercongruent to 5 modulo 24 can be written as the sum of ?ve squ…     

Particle Size Analysis by Transmission Fluctuation Spectrometry: Experimental Results Obtained with a Gaussian Beam and Analog Signal Processing

Transmission fluctuation spectrometry (TFS) is a method for the analysis of particle size distributions based on the statistical fluctuations of a transmission signal. Complete information on the PSD and particle concentration can be retrieved by a special transformation of the transmission signal, whereby the expectancy of the transmission square (ETS) is determined after the signal has been subjected to a procedure of spatial and temporal averaging. By varying the averaging parameters over a wide range, a spectrum of ETSs is obtained and introduced into a linear equation system, which yields the PSD. In the experimental realization presented here, variable temporal averaging is realized in the frequency domain with a series of low pass filters at different cutoff frequencies while spatial averaging inevitably occurs as the particles pass through a focused Gaussian beam of finite cross section. Experimental results on spherical particles (glass beads) and non‐spherical particles (SiC) are presented. The PSDs are resolved in 30 intervals within a particle size range from 1–1000 μm, employing a modified Chahine inversion algorithm. So far, the measurements are limited to moderate particle concentrations. Some influences affecting the measurements, especially for higher particle concentrations, are discussed in detail.     

A two dimensional, experimental study on the evolution of the detachment and its time-behavior in filled rubber

Summary The detachment of a rubber matrix from a rigid inclusion under monotonic loading and at subsequent relaxation is investigated within two dimensional analysis. Examined are stress–strain experimental data acquired with the help of a test bed equipped with a digital image-acquisition device. The influence of the interfacial bonding strength and the particle size on the detachment process is analyzed. The influence of the interfacial bonding strength is visible in the stress–strain diagram of loading and in the recorded images. The relaxation test reveals no influence of the bonding strength on the stress-relaxation. However, the image analysis indicates a secondary transient creep of the contour of detachment, which depends on the interfacial bonding.     

Symmetry specified enumeration of substituted derivatives: an easy solution to the complex problem

Several sophisticated methods to solution of symmetry specified enumeration problems are available in the modern literature. In this paper we propose a simple technique that allows one to manually compute the exact numbers of fixed-symmetry derivatives for a given structure either with inclusion or ignoring the substitution patterns. The basic idea of the method suggested consists in the derivation of Pólya-like cycle indices for the automorphism groups of specially constructed orbit partition graphs; the expansion of these indices and subsequent simple calculations result in the desired numbers of substituted derivatives with achiral substituents. Limitations of the new technique (and a method suggested earlier) depend on the relevance of the orbit partitions for particular subgroups of the point symmetry group. For illustration purposes, the results obtained for the prismane (D _3h ) and adamantane (T _d ) structures are discussed. In the former case the numbers of substituted derivatives can be found for all subgroups of the D _3h group, whereas in the latter case these numbers can be determined for eight out of eleven subgroups of the T _d point symmetry group. This work is based on the text of the lecture presented by the authors at the 5th All-Russia Conference on Molecular Modeling (Moscow, April 2007). The paper deals with the methodology and detailed treatment of applied aspects related to solution of enumeration problems for substituted derivatives with prescribed symmetry groups. Unlike the known methods of symmetry specified enumeration, the technique suggested is simple enough and may be regarded as generalization of the Pólya methodology, which is widely used by chemists. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 227–245, February, 2008.     

Effect of the incomplete accommodation of the heterogeneous recombination energy on heat fluxes to a quartz surface

Taking both the heterogeneous catalytic processes, including the surface formation of particles with excited internal degrees of freedom, and the processes of multicomponent diffusion and heat transfer in the MESOX apparatus fully into account makes it possible to obtain a recombination coefficient and an accommodation coefficient of the oxygen-atoms-on-quartz recombination energy which are in good agreement with the experimental data. The heterogeneous catalysis model constructed can be used effectively for predicting the heat fluxes to the surface of reentry vehicles on their entry into the Earth’s atmosphere.     

Synthesis and characterization of wholly aromatic poly(azomethine)s containing donor–acceptor triphenylamine moieties

N‐(4‐nitrophenyl)‐4′,4″‐bisformyl‐diphenylamine was synthesized from N‐(4‐nitrophenyl)‐diphenylamine by the Vilsmeier‐Haack reaction. Soluble aromatic poly(azomethine)s (PAMs) were prepared by the solution polycondensation of N‐(4‐nitrophenyl)‐4′,4″‐bisformyl‐diphenylamine and aromatic diamine in N‐methyl‐2‐pyrrolidone (NMP) at room temperature under reduced pressure. All the PAMs are highly soluble in various organic solvents, such as N,N‐dimethylacetamide (DMAc), chloroform (CHCl₃), and tetrahydrofuran (THF). Differential scanning calorimetry (DSC) indicated that these PAMs had glass‐transition temperatures (T_gs) in the range of 170–230 °C, and a 10% weight‐loss temperatures in excess of 490 °C with char yield at 800 °C in nitrogen higher than 60%. These PAMs in NMP solution showed UV‐Vis charge‐transfer (CT) absorption at 405–421 nm and photoluminescence peaks around 462–466 nm with fluorescence quantum efficiency (Φ_F) 0.10–0.99%. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of these PAMs can be determined from cyclic voltammograms as 4.86–5.43 and 3.31–3.34 eV, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4921–4932, 2007     

Numerical method and models for anti-plane strain of a system with a thin elastic wedge

The paper presents a general method to find asymptotics for a (multi-)wedge system containing a thin wedge. It employs separation of the symmetric and anti-symmetric parts of the boundary displacements and tractions of the wedge. The method is applicable when the angle of the thin wedge turns to zero. A physical interpretation of the derived equations is obtained by using power expansions of non-polynomial functions, which appear after the Mellin transform. We establish that the first term in the expansion of the symmetric part corresponds to shear, while the first term of the anti-symmetric part describes deflection of the wedge axis. Numerical experiments, performed by using a code developed on the basis of the theory, show that using only the first terms of the expansions insignificantly influence accuracy: the approximate results coincide with the exact values of roots to the third significant digit even for the wedge angle of 30°.