Two-dimensional electronic transport in In0.53Ga0.47As quantum Wells

Transport properties of the electrons itinerant two dimensionality in a square quantum well of In_0.53Ga_0.47As are studied in the framework of Fermi-Dirac statistics including the relevant scattering mechanisms. An iterative solution of the Boltzmann equation shows that the ohmic mobility is controlled by LO phonon scattering at room temperature, but below 130 K alloy scattering is predominant. The calculated mobilities with a suitable value of the alloy scattering potential agree with the experimental results over a range of lattice temperature. For lattice temperatures below 25 K where the carrier energy loss is governed by the deformation potential acoustic scattering, the warm electron coefficient is found to be negative. Its magnitude decreases with increasing lattice temperature and is greater for larger channel widths. Values of the small-signal AC mobility of hot electrons at a lattice temperature of 4.2 K are obtained for different sheet carrier densities and channel widths. Cut-off frequencies around 100 GHz are indicated.Dedicated to H.-J. Queisser on the occasion of his 60th birthday     

Verbindungsbildung in den quasi-binären Systemen AcX4?MX2 (Ac = Th,U; M = Ca,Sr, Ba,Eu, Ge,Sn, Pb; X = Br,I)

Formation of Compounds in the Quasi-binary Systems AcX₄? MX₂ (Ac = Th, U; M = Ca, Sr, Ba, Eu, Ge, Sn, Pb; X = Br, I) T,x-phase diagrams of the systems ThI₄? SnI₂, ThI₄? PbI₂, ThI₄? CaI₂, and ThI₄? SrI₂ were established using thermoanalysis and x-ray methods. The only ternary compounds have a 1:1 composition. Further AcMX₆ compounds (Ac: Th, U; M: Ca, Sr, Ba, Eu, Ge, Sn, Pb; X: Br, I) were synthesized and their structures investigated. Four structure types are found depending on the temperature and the Ac/M combinations. The structures of γ-ThSnI₆ and β-ThSnI₆ were determined with single crystal methods as representatives of a whole series of isotypic compounds.     

Exact solutions for nonlinear Schr?dinger equation in phase space: applications to Bose－Einstein condensate

The stationary-state nonlinear Schr?dinger equation, which models the dilute-gas Bose－Einstein condensate, is introduced within the framework of the quantum phase-space representation established by Torres-Vega and Frederick. The exact solutions of equation are obtained in the phase space, by means of the wave-mechanics method. The eigenfunctions in position and momentum spaces are obtained through the ‘Fourier-like' projection transformation from the phase space eigenfunctions. The eigenfunction with a hypersecant part is discussed as an example.     

Ground state properties of a Bose－Einstein condensate confined in an anharmonic external potential

In light of the interference experiment of Bose－Einstein condensates, we present an anharmonic external potential model to study ground state properties of Bose－Einstein condensates. The ground state energy and the chemical potential have been analytically obtained, which are lower than those in harmonic trap. Additionally, it is found that the anharmonic strength of the external potential has an important effect on density and velocity distributions of the ground state for the Thomas－Fermi model.     

[C14MIM]Br离子液体对聚丙烯超临界CO2发泡性能的影响

本文对PP/[C₁₄MIM]Br体系的熔融过程和对CO₂的吸收, 以及[C₁₄MIM]Br在PP基体中的分散状态进行了研究, 并初步考察了[C₁₄MIM]Br对PP发泡性能的影响.     

NaBr对C12-s-C12•2Br/氯仿体系中反胶团增溶水能力的影响

近红外(NIR)光谱技术可用于表征氯仿体系中反胶团增溶水的能力. 对于C12-s-C12•2Br (s=2, 3, 4, 5, 6, 8)系列, 不论体系是否含有NaBr电解质, 由于具有较短联接链的表面活性剂易形成较大的反胶团, 其增溶水的能力随着联接链长度增加而降低. 与未含NaBr电解质的体系相比, 当体系中存在NaBr电解质时所形成的反胶团增溶水能力降低.     

FER分子筛中铝原子的受限落位

分子筛是一类具有规则孔道或笼状结构的多孔材料,因其独特的结构和可调的酸性而广泛用于石油化工、精细化学品合成、现代煤化工等诸多行业.2006年Iglesia等在具有8元环孔道结构/侧口袋的FER和MOR分子筛上实现了无卤素添加、无贵金属存在条件下,由二甲醚羰基化合成乙酸甲酯的反应.乙酸甲酯通过进一步加氢可实现煤基乙醇的绿色生产.MOR分子筛通常具有较高的催化活性,但失活迅速;FER分子筛表现出良好的催化稳定性,但活性较低.如何在保证FER分子筛稳定性的前提下,进一步提升其羰基化活性是目前研究的热点.前期理论和实验研究发现,二甲醚羰基化反应活性与分子筛8元环孔道中的Br?nsted酸位密度存在正相关.因此,通过优化合成条件,选择性调控铝原子分布在"ferrierite"笼中,可以提高FER分子筛的羰基化反应活性.尽管研究者已在调节FER分子筛铝分布方面进行了大量研究,但对于不同T位上Al原子的精准识别以及对应Br?nsted酸位的可接触性还缺少系统和深入的认识.本文选取了几种代表性模板剂,分别在碱性和含氟体系下制备了系列FER分子筛样品,利用Rietveld精修和模拟退火算法,在原子水平揭示了模板剂种类以及合成介质变化对Al原子在不同T位分布的影响,并结合二甲醚羰基化反应进行了结构和性能的关联.首先选取不同尺寸大小的环状胺(环己胺、哌啶、吡啶、吡咯烷)和链状胺(乙二胺)合成了具有相似形貌、孔结构、酸密度的系列FER分子筛样品.以CHA-Na-FER为例,PXRD精修结果显示,Na+(平衡35％的骨架负电荷)分布在10元环孔道中与O1形成氢键,质子化的环己胺分布在"ferrierite"笼中,并且环己胺上的N与O3形成氢键.这说明与O1相连的T3位以及与O3相连的T1位都有可能是Al富集的位置.为了进一步验证该结论,本文还精修了吸附探针分子吡啶的样品CHA-Na-FER-Py-60h.原粉以及吸附吡啶样品的精修结果表明,T1位和T3位是样品中铝富集的位置.随后,运用相同方法研究了Py-Na-FER,PI-Na-FER,En-Na-FER和Pyrr-HF-FER样品中的Al落位,发现T1/T3位均是样品中Al富集的位置.此外,理论计算结果表明T1/T3位上Al原子的取代能较低,说明Al优先取代T1/T3位上的Si,这与精修结果相一致.前期理论模拟结果表明,FER分子筛中T2-O5和T4-O7位点的CO插入反应能垒较低,是二甲醚羰基化反应的活性位.本文吡啶吸附实验、热重分析以及PXRD精修结果表明,FER分子筛中大部分Al富集在T1/T3位,与T2/T4位相关的Br?nsted酸约占18％～30％.最后,对各样品进行了二甲醚羰基化反应评价,结果显示PI-Na-FER,Py-Na-FER,En-Na-FER和CHA-Na-FER催化剂的乙酸甲酯生成速率相近,约为0.10 mol/(mol H+?h).Pyrr-HF-FER催化剂的乙酸甲酯生成速率最高,可达到0.16 mol/(mol H+?h),这可能是由于Pyrr-HF-FER催化剂具有更多T2/T4位相关的Br?nsted酸.虽然Pyrr-HF-FER催化剂的乙酸甲酯生成速率较其他四个催化剂有一定提升,但其仍远低于MOR分子筛上乙酸甲酯生成速率(0.40 mol/(mol H+·h)).综上,有机模板剂的选择与合成介质的改变对FER分子筛中Al分布的调控作用是有限的,即Al原子总是优先分布于T1/T3位.而与T1和T3位相关的Br?nsted酸位不是二甲醚羰基化反应的活性位点.因此与MOR相比,FER分子筛在二甲醚羰基化反应中表现出较低的催化活性.     

Efficient Microscale Preparation of Isotopically Enriched 1‐[79Br]Bromo‐2‐Fluoroethylene, [79Br]BrHC˭CHF

Abstract

An efficient preparation of 1‐[⁷⁹Br]bromo‐2‐fluoroethylene, [⁷⁹Br]BrHC?CHF, was carried out by a three‐step procedure: (a) natural 1‐bromo‐2‐fluoroethylene, BrHC?CHF, was iodinated to 1‐fluoro‐2‐iodoethylene, FHC?CHI; (b) 1‐fluoro‐2‐iodoethylene was ⁷⁹Br₂‐brominated to 1,2‐di[⁷⁹Br]bromo‐1‐fluoro‐2‐iodoethane, [⁷⁹Br]BrFCHCH[⁷⁹Br]BrI; and (c) 1,2‐di[⁷⁹Br]bromo‐1‐fluoro‐2‐iodoethane was dehalogenated to 1‐[⁷⁹Br]bromo‐2‐fluoroethylene, [⁷⁹Br]BrHC?CHF. The yield of isolated product, on a 2‐mmol scale, was 62% with respect to ⁷⁹Br₂.     

Study on the nature of interaction of BrCl with HF,H2O,and NH3

By counterpoise‐corrected optimization method, the interactions of BrCl with the first‐row hydrides (HF, H₂O, NH₃) have been investigated at the MP2/6–311++G(3d,3p) level. To understand that the X? Br‐type (X = F, O, N) structure is more stable than the corresponding hydrogen‐bonded structure in these complexes, the electronic properties were also investigated. Symmetry‐adapted perturbation theory (SAPT) analysis has been carried out to understand the nature of the weak hydrogen bond and X? Br‐type interactions. On the other hand, for the weak hydrogen‐bonded complexes and the X? Br‐type complexes charges transfer is well correlated with the total induction energies. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

The compounds KAs4O6 X (X=Cl,Br, I) and NH4As4O6 X (X=Br,I): Hydrothermal syntheses and structure determinations

The crystal structures of five isotypic hexagonal compounds with general formulaMAs₄O₆ X [M=K, NH₄;X=Cl, Br, I; space group: P622;Z=1] were determined from 370 single crystal X-ray data and refined toR values <0.05. The structure type is characterized by neutral charged [As₂O₃] sheets arranged parallel (00.1). The As atoms of neighbouring two sheets point to each other and the sheets are combined by interlayeredM andX atoms, respectively. TheM atoms are coordinated to twelve oxygen atoms, theX atoms are coordinated to twelve arsenic atoms. In both cases the coordination polyhedron is a hexagonal prism. The compounds were synthesized by thermal treatments of cubic As₂O₃ and potassium or ammonium haloids in a saturated aqueous solution of potassium acetate resp. ammonia [500 K, saturation vapour pressure].

---

Die Verbindungen KAs₄O₆ X (X=Cl, Br, I) und NH₄As₄O₆ X (X=Br, I): Hydrothermalsynthese und Strukturbestimmung

Zusammenfassung Die Kristallstrukturen der fünf isotypen hexagonalen Verbindungen mit der allgemeinen FormelMAs₄O₆ X [M=K, NH₄;X=Cl, Br, I; Raumgruppe: P622;Z=1] wurden anhand von 370 Einkristall-Röntgendaten bestimmt und aufR-Werte <0.05 verfeinert. Der Strukturtyp ist ausgezeichnet durch neutrale [As₂O₃]-Schichten, die parallel (00.1) angeordnet sind. Die As-Atome zweier benachbarter Schichten weisen jeweils aufeinander zu, und die Schichten selbst werden durch zwischengelagerteM- bzw.X-Atome verbunden. DieM-Atome werden jeweils von zwölf O-Atomen, dieX-Atome von zwölf As-Atomen umgeben. Das Koordinationspolyeder ist in beiden Fällen ein hexagonales Primsa. Die einzelnen Verbindungen wurden unter Hydrothermalbedingungen aus kubischem As₂O₃ und dem jeweiligen Kalium- oder Ammoniumhalogenid in einer gesättigten wäßrigen Lösung von Kaliumacetat bzw. Ammoniak synthetisiert (500 K, Sättigungsdampfdruck).