HZSM-5分子筛中邻近酸中心上的协同催化作用

总结了HZSM-5分子筛中邻近的酸中心协同催化作用的研究进展, 包括布朗斯特酸(B酸)和路易斯酸 (L酸)的协同催化、 B酸和B酸的协同催化作用. 综述了通过多种表征手段下协同催化作用机理的研究进展, 以及实验与理论计算相结合并相互验证的研究结果, 对邻近酸中心协同作用下反应分子的共同吸附、 活化与转化路径的特点进行了分析与总结, 提出了对邻近酸中心协同催化作用进行深入研究的关键科学问题和可能的解决方案.     

FER分子筛中铝原子的受限落位

分子筛是一类具有规则孔道或笼状结构的多孔材料,因其独特的结构和可调的酸性而广泛用于石油化工、精细化学品合成、现代煤化工等诸多行业.2006年Iglesia等在具有8元环孔道结构/侧口袋的FER和MOR分子筛上实现了无卤素添加、无贵金属存在条件下,由二甲醚羰基化合成乙酸甲酯的反应.乙酸甲酯通过进一步加氢可实现煤基乙醇的绿色生产.MOR分子筛通常具有较高的催化活性,但失活迅速;FER分子筛表现出良好的催化稳定性,但活性较低.如何在保证FER分子筛稳定性的前提下,进一步提升其羰基化活性是目前研究的热点.前期理论和实验研究发现,二甲醚羰基化反应活性与分子筛8元环孔道中的Br?nsted酸位密度存在正相关.因此,通过优化合成条件,选择性调控铝原子分布在"ferrierite"笼中,可以提高FER分子筛的羰基化反应活性.尽管研究者已在调节FER分子筛铝分布方面进行了大量研究,但对于不同T位上Al原子的精准识别以及对应Br?nsted酸位的可接触性还缺少系统和深入的认识.本文选取了几种代表性模板剂,分别在碱性和含氟体系下制备了系列FER分子筛样品,利用Rietveld精修和模拟退火算法,在原子水平揭示了模板剂种类以及合成介质变化对Al原子在不同T位分布的影响,并结合二甲醚羰基化反应进行了结构和性能的关联.首先选取不同尺寸大小的环状胺(环己胺、哌啶、吡啶、吡咯烷)和链状胺(乙二胺)合成了具有相似形貌、孔结构、酸密度的系列FER分子筛样品.以CHA-Na-FER为例,PXRD精修结果显示,Na+(平衡35％的骨架负电荷)分布在10元环孔道中与O1形成氢键,质子化的环己胺分布在"ferrierite"笼中,并且环己胺上的N与O3形成氢键.这说明与O1相连的T3位以及与O3相连的T1位都有可能是Al富集的位置.为了进一步验证该结论,本文还精修了吸附探针分子吡啶的样品CHA-Na-FER-Py-60h.原粉以及吸附吡啶样品的精修结果表明,T1位和T3位是样品中铝富集的位置.随后,运用相同方法研究了Py-Na-FER,PI-Na-FER,En-Na-FER和Pyrr-HF-FER样品中的Al落位,发现T1/T3位均是样品中Al富集的位置.此外,理论计算结果表明T1/T3位上Al原子的取代能较低,说明Al优先取代T1/T3位上的Si,这与精修结果相一致.前期理论模拟结果表明,FER分子筛中T2-O5和T4-O7位点的CO插入反应能垒较低,是二甲醚羰基化反应的活性位.本文吡啶吸附实验、热重分析以及PXRD精修结果表明,FER分子筛中大部分Al富集在T1/T3位,与T2/T4位相关的Br?nsted酸约占18％～30％.最后,对各样品进行了二甲醚羰基化反应评价,结果显示PI-Na-FER,Py-Na-FER,En-Na-FER和CHA-Na-FER催化剂的乙酸甲酯生成速率相近,约为0.10 mol/(mol H+?h).Pyrr-HF-FER催化剂的乙酸甲酯生成速率最高,可达到0.16 mol/(mol H+?h),这可能是由于Pyrr-HF-FER催化剂具有更多T2/T4位相关的Br?nsted酸.虽然Pyrr-HF-FER催化剂的乙酸甲酯生成速率较其他四个催化剂有一定提升,但其仍远低于MOR分子筛上乙酸甲酯生成速率(0.40 mol/(mol H+·h)).综上,有机模板剂的选择与合成介质的改变对FER分子筛中Al分布的调控作用是有限的,即Al原子总是优先分布于T1/T3位.而与T1和T3位相关的Br?nsted酸位不是二甲醚羰基化反应的活性位点.因此与MOR相比,FER分子筛在二甲醚羰基化反应中表现出较低的催化活性.     

具有光控氧空缺的钼掺杂Bi5O7Br纳米片用于光催化氮气合成氨

氨(NH3)作为合成燃料、化肥和潜在能源载体的重要前体,是现代化学工业中最重要的化学品之一.工业中主要通过高能耗的Haber-Bosch工艺在高温高压下将氮气和氢气转化为NH3,而原料氢气由天然气蒸汽获得,因而不仅消耗大量能源,而且导致温室气体二氧化碳的大量排放,对环境造成危害.光催化固氮以光能为驱动力,以水为质子源,为合成NH3提供了一种温和、绿色和可持续的方法.然而,传统固氮催化剂具有与N2结合弱、成键难以及电子转移效率低的缺点.为了克服上述问题,在催化剂中引入氧空缺和过渡金属作为给电子中心和活性位点的策略被广泛研究.本文以半导体Bi5O7Br纳米片作为研究对象,通过在水热合成过程中添加Na2MoO4前驱盐在Bi5O7Br中掺杂钼元素,合成了不同摩尔含量的钼掺杂Bi5O7Br(Mo-Bi5O7Br)纳米片,并将其应用于光催化N2还原反应,发现Mo-Bi5O7Br的光催化固氮性能显著优于空白Bi5O7Br的催化性能.扫描电镜、透射电镜、能量色散X射线元素映射以及X射线光电子能谱的结果表明,掺杂过程不会影响Bi5O7Br纳米片的晶相和形貌,掺杂后钼元素均匀地分布在Bi5O7Br纳米片晶格中.采用紫外可见漫反射光谱、电子自旋共振光谱、氮气程序升温脱附谱以及光电化学测试等方法研究了Mo-Bi5O7Br相较于空白Bi5O7Br纳米片在光催化N2还原反应中催化性能提升的原因.UV-vis DRS结果表明,钼掺杂对Bi5O7Br可见光吸收能力具有增强作用.以催化NH3产率最高的Mo-Bi5O7Br-1(Mo摩尔百分含量为1％)为研究样本,EPR结果表明,在黑暗条件下,只有Mo-Bi5O7Br-1样品可以检测到明显的表面氧空位(OVs)信号;在光照条件下,Bi5O7Br和Mo-Bi5O7Br-1两种样品都出现OVs的信号峰,但同等光照时间下的Mo-Bi5O7Br-1具有更高的信号强度.此外,OVs信号会随着光照时间的延长逐渐增强;当移除光源后,信号强度逐渐降低.这表明Mo-Bi5O7Br-1在光照下会产生更高浓度的表面光控OVs.N2-TPD结果表明,光控OVs作为活性位点促进催化剂对N2的吸附.关闭光源后,OVs被环境中的水或氧气中的氧原子重新填充,避免了OVs易被氧化而导致反应失活的缺点,有助于保持Mo-Bi5O7Br-1催化N2还原反应的活性和稳定性.光电化学表征结果表明,Mo-Bi5O7Br-1中的光生载流子的分离和迁移效率明显提高.以上结果表明,掺杂过渡金属钼有助于Bi5O7Br纳米片表面光控OVs的生成,光控OVs作为活性位点提升了Bi5O7Br吸附和活化N2的能力,钼掺杂和光控OVs协同提高Bi5O7Br内部光生载流子的分离迁移效率,增强Bi5O7Br光催化固氮合成氨的反应性能.     

TiO2晶面依赖的Ir-TiOx相互作用对Ir/TiO2催化剂巴豆醛选择性加氢性能的影响

α,β-不饱和醇是一类重要的精细化学品,主要通过α,β-不饱和醛选择性加氢获得.由于α,β-不饱和醛分子中含有共轭的C=C键和C=O键,且后者键能更大,在热力学和动力学上均不利于C=O键的选择性加氢生成α,β-不饱和醇.因此,提高α,β-不饱和醛中C=O的加氢选择性是催化领域中一项挑战性的课题.巴豆醛属于典型的α,β-不饱和醛,研究其选择性加氢生成巴豆醇具有广泛的代表意义;Ir负载在具有还原性载体(如TiO2)上时,表现出很好的C=O加氢选择性,因此,成为近年来的研究热点.由于暴露不同晶面的TiO2具有不同的形貌和电子结构,因此研究Ir-TiO2相互作用的晶面依赖性及其对巴豆醛选择性加氢反应的影响具有重要意义.本文以分别暴露{101}、{100}和{001}晶面的锐钛矿TiO2纳米晶为载体,制备了负载型Ir/TiO2催化剂,系统研究了催化剂经过不同的预处理过程(在不同温度下H2还原和O2再氧化)后对巴豆醛的气相选择性加氢的性能.利用高分辨透射电镜、原位X射线光电子能谱和原位漫反射红外光谱及氨程序升温脱附等技术研究发现,预处理条件显著改变了Ir-TiOx的相互作用,包括Ir金属的几何、电子性质及催化剂表面酸性.这种相互作用与TiO2的暴露晶面密切相关,从而改变了不同Ir/TiO2催化剂上不同加氢反应行为.研究结果表明,经300℃预还原的Ir/TiO2-{101}催化剂催化性能最好,在80℃下初始反应速率为166.1 μmol g-Ir-1 s-1,巴豆醇的生成转化频率为0.022 s-1.与其他催化剂相比,Ir/TiO2-{101}催化剂表面Ir0浓度最高,表面酸度适中,因此表现出最佳的催化性能.同时Ir-TiOx界面在反应中的协同作用,对H2和巴豆醛分子中C=O键的吸附和活化起到了关键作用.然而当催化剂经过400℃的H2预还原后,由于产生了强的金属-载体相互作用使得TiOx对Ir粒子进行了包裹从而导致Ir-TiOx界面缺失,因而催化剂催化巴豆醛加氢性能降低.本文为理解金属-载体相互作用对巴豆醛选择性加氢反应的影响提供了新的见解,并为设计高性能α,β-不饱和醛选择性加氢催化剂提供了理论依据.     

Evidence for ion–ion interactions between peptides and anions (HSO4− or ClO4−) derived from high‐acidity acids

The existence of gas‐phase electrostatic ion–ion interactions between protonated sites on peptides ([Glu] Fibrinopeptide B, Angiotensin I and [Asn¹, Val⁵]‐Angiotensin II) and attaching anions (ClO₄^? and HSO₄^?) derived from strong inorganic acids has been confirmed by CID MS/MS. Evidence for ion–ion interactions comes especially from the product ions formed during the first dissociation step, where, in addition to the expected loss of the anion or neutral acid, other product ions are also observed that require covalent bond cleavage (i.e. H₂O loss when several carboxylate groups are present, or NH₃ loss when only one carboxylate group is present). For [[Glu] Fibrinopeptide B + HSO₄]^?, under CID, H₂O water loss was found to require less energy than H₂SO₄ departure. This indicates that the interaction between HSO₄^? and the peptide is stronger than the covalent bond holding the hydroxyl group, and must be an ion–ion interaction. The strength and stability of this type of ion‐pairing interaction are highly dependent on the accessibility of additional mobile charges to the site. Positive mobile charges such as protons from the peptide can be transferred to the attaching anion to possibly form a neutral that may depart from the complex. Alternatively, an ion–ion interaction can be disrupted by a competing proximal additional negatively charged site of the peptide that can potentially form a salt bridge with the positively charged site and thereby facilitate the attaching anion's departure. Copyright © 2014 John Wiley & Sons, Ltd.     

Urea‐Induced Acid Amplification: A New Approach for Metal‐Free Insertion Chemistry

The enhanced catalytic activity of difluoroboronate ureas proved to be essential as an acidity amplifier to promote metal‐free O?H and S?H insertion reactions of α‐aryldiazoacetates in high yield. This methodology was found to be generally applicable to a broad substrate scope and presents a conceptually new approach for organocatalytic diazo insertion reactions. Mechanistic investigations suggest that the reaction pathway involves a urea‐induced protonation of the α‐aryldiazoester.     

Spectroscopic Monitoring of the Acidity of Water Films on Ru(0001): Orientation‐Specific Acidity of Adsorbed Water

We examined the acid–base properties of water films adsorbed onto a Ru(0001) substrate by using surface spectroscopic methods in vacuum environments. Ammonia adsorption experiments combined with low‐energy sputtering (LES), reactive ion scattering (RIS), reflection–absorption infrared spectroscopy (RAIRS) and temperature‐programmed desorption (TPD) measurements showed that the adsorbed water is acidic enough to transfer protons to ammonia. Only the water molecules in an intact water monolayer and water clusters larger than the hexamer exhibit such acidity, whereas small clusters, a thick ice film or a partially dissociated water monolayer that contains OH, H₂O and H species are not acidic. The observations indicate the orientation‐specific acidity of adsorbed water. The acidity stems from water molecules with H‐down adsorption geometry present in the monolayer. However, the dissociation of water into H and OH on the surface does not promote but rather suppresses the proton transfer to ammonia.     

Asymmetric Cascade Reaction to Allylic Sulfonamides from Allylic Alcohols by Palladium(II)/Base‐Catalyzed Rearrangement of Allylic Carbamates

A regio‐ and enantioselective tandem reaction is reported capable of directly transforming readily accessible achiral allylic alcohols into chiral sulfonyl‐protected allylic amines. The reaction is catalyzed by the cooperative action of a chiral ferrocene palladacycle and a tertiary amine base and combines high step‐economy with operational simplicity (e.g. no need for inert‐gas atmosphere or catalyst activation). Mechanistic studies support a Pd^II‐catalyzed [3,3] rearrangement of allylic carbamates—generated in situ from the allylic alcohol and an isocyanate—as the key step, which is followed by a decarboxylation.     

Acidic‐pH‐Activatable Fluorescence Probes for Visualizing Exocytosis Dynamics

Live imaging of exocytosis dynamics is crucial for a precise spatiotemporal understanding of secretion phenomena, but current approaches have serious limitations. We designed and synthesized small‐molecular fluorescent probes that were chemically optimized for sensing acidic intravesicular pH values, and established that they can be used to sensitively and reliably visualize vesicular dynamics following stimulation. This straightforward technique for the visualization of exocytosis as well as endocytosis/reacidification processes with high spatiotemporal precision is expected to be a powerful tool for investigating dynamic cellular phenomena involving changes in the pH value.     

Highly Enantioselective Kinetic Resolution of Axially Chiral BINAM Derivatives Catalyzed by a Brønsted Acid

A highly efficient strategy for the kinetic resolution of axially chiral BINAM derivatives involving a chiral Brønsted acid‐catalyzed imine formation and transfer hydrogenation cascade process was developed. The kinetic resolution provides a convenient route to chiral BINAM derivatives in high yields with excellent enantioselectivities.