ATRP of styrene catalyzed by elemental Fe(0) and Br2: An easy and economical ATRP process

In this work, zero‐valent iron (Fe(0)) (powder or wire) and elemental bromine (Br₂) were used as the catalysts for atom transfer radical polymerization (ATRP) of styrene (St) without any additional initiator at 110 °C. The polymerizations happened with controlled evidence at appropriate molar ratio of Fe(0) to Br₂: a remarkable increase of molecular weights with St conversions, the narrow molecular weight distributions and living polymer chains end‐capped by Br. More Br₂ or less Fe(0) led to a slow polymerization rate but an improved control over molecular weights. After examining the polymer chain ends by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, it was concluded that the polymerization was initiated by thermal self‐initiation, and regulated by the in situ generated Fe^IIIBr₃. The results suggested that the Fe(0)/Br₂ catalyzing polymerization was a classical ATRP process with easier operation and more economical components. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A 3D supramolecular dimeric assembly based on thiacalix[4]arene by halogen bonding and carbonyl bonding and its dynamic NMR study of conformational preferences

The dimeric assembly of 5,11,17,23-tetrabromo-25,26,27,28-tetrahydroxy thiacalix[4]arene (2) was constructed with several interesting noncovalent interactions such as halogen bonding, sulfur···sulfur (S···S), C=O···π, and hydrogen bonding which were also supported by DFT calculations. In addition, we studied the conformational preferences of 2 using variable temperature NMR experiments. The results revealed that the compound exists in various conformations in a solution state and in a partial cone conformation in a solid state.     

Ein Vergleich zwischen radioaktiver Markierung und Indikator-Aktivierungsanalyse bei der Messung von Verweilzeitspektren

An VK-Z-Rohren zur Herstellung von Polyamid wurden Verweilzeitspektren mit der Methode der radioaktiven Markierung und der Methode der Indikatoraktivierungsanalyse gemessen. Die nach den beiden Methoden ermittelten Verweilzeitspektren werden miteinander verglichen. Die Übereinstimmung der Verweilzeitspektren wird durch Gegenüberstellung der statistischen Momente und durch einen Test nach Kolmogoroff-Smirnov geprüft. Es wird der experimentelle Aufwand beider Verfahren diskutiert und eine Fehlerabschätzung durchgeführt.     

Comparison of solubility of gases and vapours in wet and dry alcohols,especially octan‐1‐ol

Equations for the solubility of gases and vapours into dry alcohols from methanol to decan‐1‐ol and into water‐saturated alcohols from butan‐1‐ol to decan‐1‐ol have been compared through the use of the Abraham solvation equation. It is shown that there are noticeable differences in solvation into the dry and wet alcohols, and that these differences become larger as the alcohols become smaller and take up more water. The two main factors that lead to the differences in solvation are the solute hydrogen‐bond basicity, B, and solute size, L. Increase in solute hydrogen‐bond basicity favours the wet alcohols and increase in solute size favours the dry alcohols. Solute hydrogen‐bond acidity plays no part, because the hydrogen‐bond basicity of water, wet alcohols and dry alcohols is almost the same. Copyright © 2008 John Wiley & Sons, Ltd.     

Two-dimensional electronic transport in In0.53Ga0.47As quantum Wells

Transport properties of the electrons itinerant two dimensionality in a square quantum well of In_0.53Ga_0.47As are studied in the framework of Fermi-Dirac statistics including the relevant scattering mechanisms. An iterative solution of the Boltzmann equation shows that the ohmic mobility is controlled by LO phonon scattering at room temperature, but below 130 K alloy scattering is predominant. The calculated mobilities with a suitable value of the alloy scattering potential agree with the experimental results over a range of lattice temperature. For lattice temperatures below 25 K where the carrier energy loss is governed by the deformation potential acoustic scattering, the warm electron coefficient is found to be negative. Its magnitude decreases with increasing lattice temperature and is greater for larger channel widths. Values of the small-signal AC mobility of hot electrons at a lattice temperature of 4.2 K are obtained for different sheet carrier densities and channel widths. Cut-off frequencies around 100 GHz are indicated.Dedicated to H.-J. Queisser on the occasion of his 60th birthday     

Verbindungsbildung in den quasi-binären Systemen AcX4?MX2 (Ac = Th,U; M = Ca,Sr, Ba,Eu, Ge,Sn, Pb; X = Br,I)

Formation of Compounds in the Quasi-binary Systems AcX₄? MX₂ (Ac = Th, U; M = Ca, Sr, Ba, Eu, Ge, Sn, Pb; X = Br, I) T,x-phase diagrams of the systems ThI₄? SnI₂, ThI₄? PbI₂, ThI₄? CaI₂, and ThI₄? SrI₂ were established using thermoanalysis and x-ray methods. The only ternary compounds have a 1:1 composition. Further AcMX₆ compounds (Ac: Th, U; M: Ca, Sr, Ba, Eu, Ge, Sn, Pb; X: Br, I) were synthesized and their structures investigated. Four structure types are found depending on the temperature and the Ac/M combinations. The structures of γ-ThSnI₆ and β-ThSnI₆ were determined with single crystal methods as representatives of a whole series of isotypic compounds.     

Tris(oxalato)phosphorus acid and its lithium salt

The conversion of three equivalents of anhydrous oxalic acid with phosphorus pentachloride yields tris(oxalato)phosphorus acid 1, which crystallizes from diethyl ether solutions as protonated diethyl ether complex [(Et2O)2H](+)[P(C2O3)3)]-. The superacidic compound can be used as catalyst for Friedel-Crafts-type reactions. Upon neutralization with lithium hydride, the lithium salt Li[P(C2O3)3] 2 is obtained, which is highly soluble in aprotic solvents and which exhibits a wide voltage window. Thus, the lithium compound is a promising candidate as electrolyte for high performance non-aqueous batteries.     

Influence of amide linkages on acidity determinations of humic substances Testing with model-mixtures

A set of experiments, using model compounds, was carried out in order to evaluate the influence of amide linkages on acidity measurements of humic substances (HS). Three benzene-carboxylic acids (2,4-dihydroxybenzoic acid; 3,5-dihydroxybenzoic acid, and phthalic acid) and two peptides (dl-alanyl-dl-alanine, and glycil-l-leucine) were employed to simulate the major acidic functional groups present in humic material. The acidity of the samples was measured, using the Schnitzer and Gupta methods, for each compound separately, as well as for selected mixtures with different compound combinations. General results showed that, in the absence of peptides, phenolic groups with high pK_a values are not detected in the barium hydroxide reaction and the data so obtained do not represent the real concentrations of the acidic groups. For the mixtures containing peptides, the presence of amide linkages distorts the results relative to the total acidity (TA) mainly because under the extreme conditions of the reaction with Ba(OH)₂ hydrolysis of the peptide occurs, consuming extra hydroxyl groups and increasing artificially the phenolic content. Such a condition is minimized by the reduction of the reaction time.