Electrochemical Properties of an Osmium(II) Copolymer Film and Its Electrocatalytic Ability Towards the Oxidation of Ascorbic Acid in Acidic and Neutral pH

Copolymerization of an osmium(II) functionalized pyrrole moiety, osmium‐bis‐N,N'‐(2,2′‐bipyridyl)‐N‐(pyridine‐4‐ylmethyl‐(8‐pyrrole‐1yl–octyl)‐amine)chloride ( I ) with 3‐methylthiophene was carried out. The resulting conducting polymer film exhibited a clear redox couple associated with the Os^3+/2+ response and the familiar conducting polymer backbone signature. The effect of film thickness upon the redox properties of the copolymer was investigated in organic electrolyte solutions. Scanning electron micrographs (SEM) along with energy dispersive X‐ray (EDX) spectra of the copolymerized films were undertaken, both after formation and redox cycling in neutral buffer solution. These clearly show that electrolyte is incorporated into the polymer film upon redox cycling through the Os^3+/2+ redox system. The Os^3+/2+ response associated with the copolymer was seen to be significantly altered in the presence of ascorbic acid both in acidic and neutral pH buffer solutions. This pointed to an electrocatalytic reaction between the ascorbic acid and the Os³⁺ form of the copolymer. Under acidic conditions the copolymer film exhibited a sensitivity of 1.76 (±0.05) μA/mM with a limit of detection (LOD) of 1.45 μM for ascorbic acid. Under neutral pH conditions the copolymer exhibited a sensitivity of 19.26 (±1.05) μA/mM with a limit of detection (LOD) of 1.28 μM for ascorbic acid.     

Electrical Conductance and Volumetric Studies in Aqueous Solutions of DL-Pyroglutamic Acid

Conductivity measurements of DL-pyroglutamic acid and sodium pyroglutamate in dilute aqueous solutions were performed in the 288.15–323.15 K temperature range. The limiting molar conductances of pyroglutamate anion, λ^o(pGlu⁻, T) and the dissociation constants of pyroglutamic acid, K(T) were derived from the Onsager, and the Quint and Viallard conductivity equations. Densities of aqueous solutions with molalities lower than 0.5 mol-kg⁻¹ were determined at 5 K intervals from T = 288.15 K to 333.15 K. Densities served to evaluate the apparent molar volumes, V_2,φ(m, T), the cubic expansion coefficients, α (m,T) and the changes of the isobaric heat capacities with respect to pressure, (∂ C_P/∂ P)_T,m. They were correlated qualitatively with the changes in the structure of water when pyroglumatic acid is dissolved in it.     

New C2-symmetric 2,2′-bipyridine crown macrocycles for enantioselective recognition of amino acid derivatives

A series of new C₂-symmetric 2,2′-bipyridine-contaning crown macrocycles 1-4 has been developed for enantiomeric recognition of amino acid derivatives. These new macrocycles have been showed to be strong complexing agents for primary organic ammonium salts (with K up to 4.83×10⁵ M⁻¹ and −ΔG₀ up to 32.4 kJ mol⁻¹) and also useful chromophores for UV-vis titration studies. These macrocyclic hosts exhibited enantioselective binding towards the (S)-enantiomer of phenylglycine methyl ester hydrochloride (Am1) with K_(S)/K_(R) up to 2.10 (ΔΔG₀=−1.84 kJ mol⁻¹) in CH₂Cl₂ with 0.25% CH₃OH. The structure-binding relationship studies showed that the aromatic subunit and the ester group of the ammonium guests are both important for good enantioselectivity. In addition, the host-guest complexes have been studied using various NMR experiments.     

Synthesis of 2-(α-Hydroxyalkyl)-2-Oxazoline under Microwave Irradiation in Bluk

Four 2-(α-hydroxyalkyl)-2-oxazolines and a 2-(α-hydroxy-α,α-diphenyl)-2-benzooxazole were synthesized from β-amimoalcohols and α-hydroxy carboxylic acids under microwave irradiation in the absence of a solvent.     

Synthesis of 4b,5,10a,11-tetrahydroindeno[1,2-b]quinolin-10-ones from Baylis-Hillman adducts

We developed an efficient synthetic method for indenoquinoline skeletons from Baylis-Hillman adducts. 4b,5,10a,11-Tetrahydroindeno[1,2-b]quinolin-10-ones and 7H-indeno[2,1-c]quinolines were prepared from Baylis-Hillman adducts in polyphosphoric acid.     

Nucleation of β-hairpin structure in a pyrrole amino acid containing peptide

Synthesis and conformational studies of two short peptides containing pyrrole amino acids (1, Paa), Boc-Paa-Paa-d-Pro-Gly-Xaa-Paa-Paa-OMe (2: Xaa=Ala; 3: Xaa=Val), were carried out in which it was established that replacement of Ala in 2 with a Val residue helps peptide 3 to adopt a well-defined β-hairpin conformation in a nonpolar solvent, like CDCl₃.     

Phospholipid coated poly(lactic acid) microspheres for the delivery of LHRH analogues

The aim of this work was to develop alternative peptide‐loaded microspheres using liposphere formulation—a lipid based microdispersion system. This formulation represents a new type of lipid or polymer‐based encapsulation system developed for parenteral and topical drug delivery of bioactive compounds. Our strategy was to utilize the liposphere formulation to improve the entrapment efficiency and release profile of triptorelin and leuprolide [luteinizing hormone–releasing hormone (LHRH) analogues] in vitro. Peptides (2% w/w) were loaded into lipospheres contained of polylactic acid (PLA) or poly(lactic‐co‐glycolic acid) (PLGA) with several types of phospholipids. The effects of polymer and phospholipid type and concentration, method of preparation and solvents on the liposphere characteristics, particle size, surface and bulk structure, drug diffusion rate, and erosion rate of the polymeric matrix were studied. The use of L ‐PLA (M_w = 2000) and hydrogenated soybean phosphatidylcholine (HSPC) with phospholipid–polymer ratio of 1 : 6 w/w, was the most efficient composition that formed lipospheres of particle size in the range of 10 µm with most of the phospholipid embedded on the particles surface. In a typical procedure, peptides were dissolved in N‐methyl‐2‐pyrrolidone (NMP), and dispersed in a solution of polymer and phospholipids in a mixture of NMP and chloroform with the use of 0.1% poly(vinyl alcohol) (PVA) as the emulsified aqueous medium. Uniform microspheres were prepared after solution was mixed at 2000 rpm at room temperature for 30 min. Using this formulation, the entrapment efficiency of LHRH analogues in lipospheres was up to 80%, and the peptides were released for more than 30 days. Copyright © 2002 John Wiley & Sons, Ltd.     

Optimization of ammonium nitrate concentration in single-stage continuous cultures of Aspergillus niger with biomass retention

The effect of ammonium nitrate concentration in the citric acid biosynthesis by Aspergillus niger NC-12 in single-stage continuous cultures with biomass retention was investigated. Experiments were carried out in a BIOMER laboratory fermenter with 5 dm³ working volume. At the initial stage of each cultivation, the substrate in the bioreactor contained 1.5 g NH₄NO₃ dm⁻³. After 120 h onwards, the bioreactor was fed continuously at a constant dilution rate of 0.009 h⁻¹. NH₄NO₃ concentration in the feed was varied from one culture to another, ranging between 0.5 g dm⁻³ and 2.5 g dm⁻³. Promising results were obtained when NH₄NO₃ concentration of 1.5 g dm⁻³ was used. The observed concentration of citric acid (c _P) and yield of citric acid with respect to the introduced sucrose (Y _P/S) were 117.88 g dm⁻³ and 78.59 %, respectively. The efficiency coefficient of citric acid biosynthesis (K _ef) was very high, amounting to 83.38. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Disposable multichannel immunosensors for 2,4-dichlorophenoxyacetic acid using acetylcholinesterase as an enzyme label

An improved version of the disposable multichannel immunochemical biosensor for the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) based on a screen-printed amperometric transducer and monoclonal antibodies (MAb) against 2,4-D is reported. Entrapment within a thin Nafion film was used for the direct immobilization of MAb at the electrode surface. The amount of the tracer (2,4-D conjugated to acetylcholinesterase) bound in a competitive immunochemical reaction was determined amperometrically using acetylthiocholine iodide as substrate. The measuring procedure (times of incubation with tracer and substrate, pH, tracer concentration) was optimized. The sensor was able to detect less than 0.01 μg/L of free 2,4-D in water. One analysis (8 samples) was completed in 30 min (20 min for immunochemical reaction, 5 min incubation with substrate, 5 min measurement). The performance of the immunosensor (two configurations) was evaluated on real samples (tap water) with added 2,4-D. The determined amounts (mean values 0.097 to 0.105 and 0.89 to 1.13) corresponded well with the added contents of 2,4-D (0.100 and 1.00 μg/L, respectively).     

Determination of impurities in clodronic acid by anion-exchange chromatography

A validated ion chromatographic method for the determination of anionic impurities in clodronic acid or disodium clodronate is described. Separations are performed by using an anion-exchange column (IonPac AS5) and a sodium hydroxide gradient. Impurities are detected by suppressed conductivity without the need for derivatisation. The most important variable affecting the separation was shown to be the column temperature.