消泡剂在原子荧光光谱法测定地质样品中Hg、Bi时的应用

使用原子荧光光谱法进行测定时,样品溶液同时测定了汞、铋的含量时,没有消解完全的有机质与还原剂反应会产生大量泡沫,不仅影响测定,还会损害仪器。为了保证汞、铋测定的顺利进行,在地质样品溶液中引入了SK-大庆5号消泡剂。讨论了消泡剂不同的用法与用量对测定过程、结果的影响。结果表明:测定溶液中使用消泡剂能充分消泡,使测定信号更稳定;在样品溶液和标准曲线中加入体积分数为1%的消泡剂,会使汞、铋的测定结果偏低,在还原剂中加入体积分数少于10‰的消泡剂,不影响样品测定的荧光强度。使用建立的消泡剂使用方法对4个标准样品的汞、铋元素分别进行11次测定,所得结果的最大相对标准偏差为2.1%,测定过程能平稳而准确地进行。     

Preliminary Structure–Activity Relationship Study of the MMV Pathogen Box Compound MMV675968 (2,4-Diaminoquinazoline) Unveils Novel Inhibitors of Trypanosoma brucei brucei

New drugs are urgently needed for the treatment of human African trypanosomiasis (HAT). In line with our quest for novel inhibitors of trypanosomes, a small library of analogs of the antitrypanosomal hit (MMV675968) available at MMV as solid materials was screened for antitrypanosomal activity. In silico exploration of two potent antitrypanosomal structural analogs (7-MMV1578647 and 10-MMV1578445) as inhibitors of dihydrofolate reductase (DHFR) was achieved, together with elucidation of other antitrypanosomal modes of action. In addition, they were assessed in vitro for tentative inhibition of DHFR in a crude trypanosome extract. Their ADMET properties were also predicted using dedicated software. Overall, the two diaminoquinazoline analogs displayed approximately 40-fold and 60-fold more potency and selectivity in vitro than the parent hit, respectively (MMV1578445 (10): IC₅₀ = 0.045 µM, SI = 1737; MMV1578467 (7): IC₅₀ = 0.06 µM; SI = 412). Analogs 7 and 10 were also strong binders of the DHFR enzyme in silico, in all their accessible protonation states, and interacted with key DHFR ligand recognition residues Val32, Asp54, and Ile160. They also exhibited significant activity against trypanosome protein isolate. MMV1578445 (10) portrayed fast and irreversible trypanosome growth arrest between 4–72 h at IC₉₉. Analogs 7 and 10 induced in vitro ferric iron reduction and DNA fragmentation or apoptosis induction, respectively. The two potent analogs endowed with predicted suitable physicochemical and ADMET properties are good candidates for further deciphering their potential as starting points for new drug development for HAT.     

Synthesis of novel rhodanine based functionalized furans from the reaction of tert-butyl isocyanide with acetylenic esters in the presence of rhodanine acetic acid derivatives

The reactive 1:1 intermediate produced from the reaction of tert-butyl isocyanide and dialkyl acetylenedicarboxylates was trapped by rhodanine-N-acetic acid derivatives to generate polyfunctionalized furan rings in fairly good yields.     

Preparation of superhydrophobic nanocalcite crystals using Box–Behnken design

Superhydrophobic nanocalcite crystals were prepared via an adjusted aqueous reaction of CaO, CO₂ gas and sodium oleate. Box–Behnken design was used to optimize the preparation parameters such as CaO concentration, CO₂ gas flow rate and surfactant concentration. The results revealed that the produced CaCO₃ is indexed to the calcite phase. The crystallite size, particle size, morphology, hydrophobicity and surface charge of CaCO₃ are significantly affected by changing the preparation parameters. The addition of sodium oleate helps in reducing the crystallite size from 101 nm to 48 nm, reducing the particle size from 1.5 μm length scalenohedral particles to 40 nm rhombohedral particles and modifying the properties of pure CaCO₃ from highly hydrophilic to superhydrophobic.     

Vector-valued fractal functions: Fractal dimension and fractional calculus

There are many research available on the study of a real-valued fractal interpolation function and fractal dimension of its graph. In this paper, our main focus is to study the dimensional results for a vector-valued fractal interpolation function and its Riemann–Liouville fractional integral. Here, we give some results which ensure that dimensional results for vector-valued functions are quite different from real-valued functions. We determine interesting bounds for the Hausdorff dimension of the graph of a vector-valued fractal interpolation function. We also obtain bounds for the Hausdorff dimension of the associated invariant measure supported on the graph of a vector-valued fractal interpolation function. Next, we discuss more efficient upper bound for the Hausdorff dimension of measure in terms of probability vector and contraction ratios. Furthermore, we determine some dimensional results for the graph of the Riemann–Liouville fractional integral of a vector-valued fractal interpolation function.     

Rapid Determination of Anthracene and Benzo(a)pyrene by High-Performance Liquid Chromatography with Fluorescence Detection

A rapid and simple method was optimized and validated for the separation and quantification of anthracene and benzo(a)pyrene, two of the most toxic polycyclic aromatic hydrocarbons, at ultratrace levels in aqueous samples by direct injection. The determination of anthracene and benzo(a)pyrene was performed by reverse-phase high-performance liquid chromatography (HPLC) with fluorescence detection. A fractional factorial matrix and a Box–Behnken design were chosen for screening and optimization purposes, respectively. The optimized parameters that significantly influenced the system were the flow rate (1?mL?min^?1), mobile-phase strength (90% acetonitrile:10% deionized water), column temperature (35°C), and excitation wavelength (254 and 267?nm for anthracene and benzo(a)pyrene, respectively). The injection volume and emission wavelength were fixed at 100?µL and 416?nm, respectively. The quantification limits were 75?ng?L^?1 for anthracene and 30?ng?L^?1 for benzo(a)pyrene. The relative standard deviations for the recovery and intra and interday precision values were lower than 20%. The method allows the analysis of aqueous samples with a good resolution for anthracene and benzo(a)pyrene below values permitted by the recently developed European Directive 2013 Directive. 2013. Directive 2013/39/EU of the European parliament and of the council of 12 August 2013 amending directives 2000/60/EC and 2008/105/EC as regards priority substances in the field of water policy. Official Journal of the European Union L 226:1–17. [Google Scholar]/39/EU for inland surface waters. In addition, this work provides guidelines for the simultaneous optimization of several parameters by experimental design.     

A pot-economical and green synthesis of novel (benzo[d]imidazo[2,1-b]thiazol-3-yl)-2H-chromen-2-one in ethanol–PEG-600 under catalyst-free conditions

A catalyst-free, environmentally benign, and simple one-pot multi-component protocol has been developed for the efficient synthesis of novel (benzo[d]imidazo[2,1-b]thiazol-3-yl)-2H-chromen-2-one derivatives in excellent yields using ethanol-PEG-600. This novel and green protocol have the advantages of shorter reaction times, high conversions, and follow the group-assisted-purification (GAP) chemistry process, which can avoid traditional purifications, chromatography and recrystallization. This is the first report for the synthesis of benzo[d]imidazo[2,1-b]thiazol-3-yl)-2H-chromen-2-one.     

Quality by Design enabled enhanced bioanalytical extraction and UFLC determination of vilazodone from rat serum

An ultrafast liquid chromatographic bioanalytical method was developed and validated for the determination of vilazodone in Wistar rat serum. Principles of quality by design were implemented for enhancing the bioanalytical liquid–liquid extraction of vilazodone from rat serum. A Box–Behnken design was utilized in the studies by selecting extraction time, centrifugation speed, and vortex time as the critical method variables for evaluating their effect on the analytical attribute, i.e., %recovery of vilazodone. Chromatographic separation was achieved within a run time of 10?min using a C-18 column and mobile phase comprising of methanol:phosphate buffer of pH 7 (85:15 v/v) flowing at 1.5?mL/min. Photodiode array detection was performed at 242?nm. Results of validation studies were satisfactory. The method was linear over a concentration of 100–2,000?ng/mL with acceptable accuracy and precision. Limits of detection and quantitation for the developed method were 50 and 100?ng/mL, respectively. This QbD-based approach was found suitable for routine bioanalysis of vilazodone in the biological matrix.     

Optimization of supercritical fluid extraction of geniposidic acid from plantain seeds using response surface methodology

The process parameters of supercritical CO₂ (SCCO₂) plus modifer for the extraction of geniposidic acid from plantain seeds were studied using a Box–Behnken design. The effects of independent variables, that is, ethanol concentration (0–70%, ethanol:water, v/v), extraction pressure (10–30 MPa), and temperature (50–80°C) on the yield of geniposidic acid were evaluated. Results indicated that the data could be well fitted to a second-order polynomial model. The effects of ethanol concentration and temperature, as well as the interaction between ethanol concentration and temperature were significant (p < 0.05). The yield (8.9 mg/g) of modified SCCO₂ extraction at optimal conditions was compared with that obtained by Soxhlet extraction or ultrasound assisted extraction.     

Elementary quadratic chaotic flows with no equilibria

Three methods are used to produce a catalog of seventeen elementary three-dimensional chaotic flows with quadratic nonlinearities that have the unusual feature of lacking any equilibrium points. It is likely that most if not all the elementary examples of such systems have now been identified.