水相中磷钼酸催化三组分合成烯丙基胺

以磷钼酸作为催化剂，芳香醛、胺和三丁基烯丙基锡三组分在水作为溶剂，室温下高产率的得到相应的烯丙基胺。     

二苯并噻吩在分散型钼催化剂和原位产生的氢存在下的加氢脱硫Ⅲ. 催化剂前身物、硫化氢、一氧化碳和水对反应的影响(英)

研究了水／ 甲苯乳化液中二苯并噻吩（ 硫芴） 在分散型钼酸、磷钼酸和四硫钼酸铵催化剂存在下的加氢脱硫反应． 反应在高压釜中于３４０ ℃及三种不同的气氛即Ｈ２ ，Ｈ２／Ｈ２ Ｏ和ＣＯ／Ｈ２Ｏ（ＣＯ 和Ｈ２Ｏ 经水煤气转换反应（ ＷＧＳＲ） 产生原位氢） 的存在下进行． 用ＧＣ和ＧＣＭＳ鉴定、分析了气体和液体产物的组成． 结果表明： 对硫芴的加氢脱硫反应，在分散型四硫钼酸铵催化剂存在下，原位产生的氢的效果仅比加入的氢气稍好，而在分散型钼酸和磷钼酸催化剂存在下，原位产生的氢远比加入的氢气有效． 实验结果还表明： 硫化氢能显著提高分散型钼酸和磷钼酸催化剂的加氢脱硫活性，但在分散型四硫钼酸铵催化剂存在下，硫化氢能促进加氢反应而抑制氢解反应． 一氧化碳和水均选择性地抑制氢解反应．     

聚乙烯醇和丙烯酸-β-羟乙酯水凝胶的摩擦学特性

合成水凝胶是由水溶性单体聚合得到的轻度交联的高分子柔顺链网络 .高分子交联网络与水之间的相互作用决定着水凝胶的物理化学性质[1,2 ] .水凝胶常应用于生物医学材料和生物传感器等方面 .如接触眼镜的材料就常用甲基丙烯酸 -β-羟乙酯和聚乙烯醇 (PVA)为主要成分的水凝胶 ,所以对其摩擦性质的研究会丰富对生物医用材料的认识 .关于水凝胶的摩擦性质的研究 ,除 Osada等[3] 研究了聚乙烯醇及一些天然水凝胶在几牛顿到几十牛顿的负载下的摩擦行为外 ,尚少报道 .PVA水凝胶的结晶度对其性能影响甚大 ,但他们没有涉及结晶度与 PVA水凝胶的摩…     

Optimization of the wash process and wash water recycling in the preparation of MgZnAl-CO3 layered double hydroxides

An MgZnAl-CO3 layered double hydroxide (LDH) slurry with Na2 SO4 as the by-product has been prepared by a co-precipitation method.The filtrates in the LDH washing process were collected according to their different levels of salinity.Filtrates with lower salinity can be used to wash a LDH slurry with higher salinity in the next cycle.Only in the final stages is pure water used.Recycling of the wash water in this way has been employed in a commercial production process,resulting in a water-saving of over 80%.The resulting MgZnAl-CO3-LDH product has a well-formed crystalline layered structure with a low content of impurities.     

Ion-exchange resin decomposition in supercritical water

Abstract

Using supercritical water oxidation, the cation exchange resin was decomposed fast and completely to water, carbon dioxide and sulfuric acid. While the resin decomposition yield increased with the reaction time and the amount of hydrogen peroxide added as oxidizing agent, it was constant in the resin concentration from 0.14 to 1.9 dry resin weight percent to water. More than 99% of the cation exchange resin was decomposed with hydrogen peroxide added in the amount of 7 times the stoichiometric value at 673 K and 30MPa for 30 minutes of the reaction time. The cation exchange resin is decomposed through two main reaction pathways. One has a rate controlling intermediate such as acetic acid whose decomposition rate was very slow, and the other does not have stable intermediates. The decomposition of the acetic acid is a significant factor for the complete decomposition of the resin, although it does not dominate the whole resin decomposition. A simple kinetic model that estimates the resin decomposition yield was developed.     

Fractionally differenced models for water quality time series

This paper deals with the selection and evaluation of statistical techniques for use in the modeling and forecasting of water quality time series. The focus is on statistical concepts relevant to the analysis of flows and concentrations. A selection of time series procedures has been used for auditing water quality archival data, including the screening of data sets, correlation and spectrum calculations, and iterative model fitting. A summary is provided of experience with analyzing archival data on the Niagara River and the use of a fractionally differenced model.This paper is the result of a study performed for the International Joint Commission, United States and Canada. The authors gratefully acknowledge the direction and support provided by Dr. Joel L. Fisher.     

Synthesis and characterization of proton‐conducting copolyimides bearing pendant sulfonic acid groups

A series of sulfonated copolyimides (co‐SPIs) bearing pendant sulfonic acid groups were synthesized from 1,4,5,8‐naphthalenetetracarboxylic dianhydride (NTDA), bis(3‐sulfopropoxy) benzidines (BSPBs), and common nonsulfonated diamines via statistical or sequenced polycondensation reactions. Membranes were prepared by casting their m‐cresol solutions. The co‐SPI membrane had a microphase‐separated structure composed of hydrophilic and hydrophobic domains, but the connecting behavior of hydrophilic domains was different from that of the homo‐SPIs. The co‐SPI membranes displayed clear anisotropic membrane swelling in water with negligibly small dimensional changes in the plane direction of the membrane. With water uptake values of 39–94 wt %, they showed dimensional changes in membrane thickness of about 0.11–0.58, which were much lower than those of homo‐SPIs. The proton conductivity σ values of co‐SPI membranes with ion exchange capacity values ranging from 1.95–2.32 meq/g increased sigmoidally with increasing relative humidity. They displayed σ values of 0.05–0.16 S/cm at 50 °C in liquid water. Increasing temperature up to 120 °C resulted in further increase in proton conductivity. The co‐SPI membranes showed relatively good conductivity stability during the aging treatment in water at 100 °C for 300 h. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1545–1553, 2005     

Phase behavior study of poly(N‐tertbutylacrylamide‐co‐acrylamide) in the mixture of water–methanol: The role of polymer–nonsolvent second‐order interactions

The phase behavior of poly(N‐tertbutylacrylamide‐co‐acrylamide) (PNTBAM) in pure water and mixture of water–methanol is studied at different temperatures. The different compositions of PNTBAM are prepared by free‐radical polymerization technique and their phase behavior is studied by turbidimetry. The effects of copolymer and solvent composition on the phase behavior of the copolymers are discussed. It has been suggested that the inhomogenities in polymer chains are responsible for lowering the rate of phase transition by increasing the N‐tertbutylacrylamide (NTBAM) and methanol contents in copolymer and mixture, respectively. For the first time we have revealed that there are second‐order binary interactions in the water–methanol which are dominant in the special range of copolymer composition. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 455–462, 2009