Selective Electroanalytical Assay for Cysteine at a Boron Doped Diamond Electrode

The electrochemical oxidation of the cysteine‐quinone adduct has been examined as a means of providing an electroanalytical cysteine specific detection protocol. The appliance of square‐wave voltammetry allowed 0.5 μM as a limit of detection. The effects of various biologically relevant interferences including other thiols were studied and found to present no change in the voltammetric profile. The practical applicability and efficiency of the methodology was probed through the determination of cysteine concentration in growth tissue medium.     

Classifying wine according to geographical origin via quadrupole-based ICP–mass spectrometry measurements of boron isotope ratios

The potential of quadrupole-based ICP–MS as a tool for B-isotopic analysis of wines and its usefulness in provenance determinations were assessed. A precision of 0.1–0.25% RSD (corresponding to a relative standard deviation of the mean of three replicate measurements of 0.06–0.12%) was sufficient to establish small differences in the B isotope ratios in wines from different geographical origins. Each sample measurement was bracketed by measurements of a standard and mass bias drift correction made by interpolation. Sample preparation was kept to a minimum to avoid possible fractionation. Dilution of the wine samples by a factor of 100 with 0.65% HNO₃ was found to reduce matrix-induced mass discrimination substantially. Wines from three wine-producing regions, Stellenbosch, Robertson, and Swartland, in the Western Cape Province of South Africa, and wines from specific regions in France (Bergerac) and Italy (Valpolicella) were analyzed by ICP–QMS for their B-isotopic compositions. It was concluded that the ¹¹B/¹⁰B ratios can be used to characterize wines from different geographical origins. Average ¹¹B/¹⁰B ratios in red wines from South Africa (Stellenbosch), France (Bergerac), and Italy (Valpolicella) were found to differ by between 0.5 and 1.5%.     

An In Situ Copper Plated Boron‐Doped Diamond Microelectrode Array for the Sensitive Electrochemical Detection of Nitrate

The first example of using a copper microelectrode array for use in electroanalysis is explored and exemplified with the electroanalytical quantification of nitrate. The analytical approach is based upon the in situ deposition of copper at a boron‐doped diamond (BDD) microelectrode array. The immobilized copper layer is electrocatalytic for nitrate reduction and exhibits an analytically useful range from 1.2 to 124 μM with a marked selectivity for nitrate ion over nitrate, with a limit of detection of 0.76 μM. The analytical applicability was examined through standard addition determinations of nitrate in drinking and river water samples.     

M_nP_m~+原子簇结构的ab initio从头算(M=Cr,Mn,n=1～3,m=2～12)

应用ahinitio计算程序，我们对飞行时间质谱产生的谱图进行了理论分析。稳定的MnnPm+和CrnPm+的结构基本上是多面体，仅有少数结构为环状和平面的。在计算中，我们尚未发现有链状的簇合物，这与风簇绝大多数是多面体是相一致的。因此，单枚金属簇合物的形成机制很大可能是金属进入磷形成的笼簇中。一般地说，除了磷的个别笼状团簇外，金属和磷相互成键是普遍存在的；在二核、多核金属磷簇合物中，金属间相互作用不常见，绝大多数是通过桥磷相连的。     

Sr3(BS3)2 und Sr3(B3S6)2: Zwei neue nicht‐oxidische Chalkogenoborate mit trigonal‐planar koordiniertem Bor

Sr₃(BS₃)₂ and Sr₃(B₃S₆)₂: Two Novel Non‐oxidic Chalcogenoborates with Boron in a Trigonal‐Planar Coordination The thioborates Sr₃(BS₃)₂ and Sr₃(B₃S₆)₂ were prepared from strontium sulfide, amorphous boron and sulfur in solid state reactions at a temperature of 1123 K. In a systematic study on the structural cation influence on this type of ternary compounds, the crystal structures were determined by single crystal X‐ray diffraction. Sr₃(BS₃)₂ crystallizes in the monoclinic spacegroup C2/c (No. 15) with a = 10.187(4) Å, b = 6.610(2) Å, c = 15.411(7) Å, β = 102.24(3)° and Z = 4. The crystal structure of Sr₃(B₃S₆)₂ is trigonal, spacegroup R3¯ (Nr. 148), with a = 8.605(1) Å, c = 21.542(4) Å and Z = 3. Sr₃(BS₃)₂ contains isolated [BS₃]^3— anions with boron in a trigonal‐planar coordination. The strontium cations are found between the layers of orthothioborate anions. Sr₃(B₃S₆)₂ consists of cyclic [B₃S₆]^3— anions and strontium cations, respectively.     

Characterization and electrochemical investigation of boron-doped mesocarbon microbead anode materials for lithium ion batteries

The structure and anodic performance of boron-doped and undoped mesocarbon microbeads (MCMBs) have been comparatively studied and the results obtained by XPS, XRD, SEM, Raman spectroscopy and electrochemical measurements are discussed. It is found that boron doping introduces a depressed d ₀₀₂ spacing and the larger amount of "unorganized carbon", which induces vacancy formation in the graphite planes and leads to a quite different morphology from that of the undoped material. Electrochemical charge/discharge cycle tests indicated that after boron doping the lithium intercalation was carried through at a somewhat higher potential, being attended by greater irreversible capacity loss. Electronic Publication     

An electronic structure investigation of the BNO-BON-NBO system

The potential energy hypersurface of the ground triplet states of the BNO-BON-NBO system has been investigated using traditional ab initio electronic structure theory. The molecules studied have the molecular formula BON and include three linear and three angular species, and two transition states for the isomerization of an angular N-B-O to an angular B-O-N and a linear B-NO, respectively. All stationary points on the BNO-BON-NBO isomerization potential energy surface have been characterized employing UMP2, UMP4, and Gaussian-2 (G2) theory with the 6-311G(d), 6-311G(2d), and TZ2P basis sets. The isomerization for an angular N-BO to the linear B-NO has a lower energy barrier than that of the former to an angular B-ON. Energetics are presented with G2 energies. Two sets of resonance structures for both bent B-NO (boron nitrosyl) and B-ON (boron isonitrosyl) were proposed and the bonding in the two species was analyzed. For the purpose of comparison, the density functional theory based hybrid methods B3LYP/6-311G(d) and B3LYP/TZ2P have also been applied to both geometry optimization and single-point calculations. It is found that the B3LYP prediction of the nature of the linear B-O is contradictory to that made by all MPn(n = 2 and 4) calculations. The cause for this contradiction is discussed.     

Synthesis and X-ray structural characterisation of the tetramethylene oxonium derivative of the hydrodecaborate anion. A versatile route for derivative chemistry of [B10H10]

The oxonium derivative P(C₆H₅)₄[2-B₁₀H₉O(CH₂)₄] (1) has been prepared from [B₁₀H₁₀]²⁻ by a solvent-addition reaction route, promoted by Et₂O · BF₃. Its structure has been confirmed by single crystal X-ray analysis. 1 is assumed to be a useful synthon for the derivative chemistry of [B₁₀H₁₀]²⁻. As an illustration, ring-opening reaction occurred in presence of the strong nucleophilic agent OH⁻, giving the monoanionic derivative [P(C₆H₅)₄]₂[2-B₁₀H₉O(CH₂)₄OH] (2).     

Synthesis of triphenylene derivatives by Pd-catalyzed Suzuki coupling/intramolecular CH activation between arylboronic acids and dibromobiphenyls

An efficient and regioselective synthesis of functionalized triphenylenes via palladium-catalyzed Suzuki-Miyaura coupling and subsequent intramolecular CH activation between arylboronic acids and dibromobiphenyls was developed. This methodology showed excellent atomic economy and regiospecificity as well as synthetic feasibility of unsymmetrical triphenylenes.     

Rhodium-catalyzed arylative cyclization of alkynones induced by addition of arylboronic acids

Alkynones react with arylboronic acids in the presence of a rhodium(I) catalyst to afford four- and five-membered-ring cyclic alcohols equipped with a tetrasubstituted exocyclic olefin. The cyclic allylic alcohol skeleton is constructed by the carbon-carbon bond formation between the carbonyl group and an alkenylrhodium(I) intermediate formed by the regioselective addition of an arylrhodium(I) species across the carbon-carbon triple bond.