低泵浦功率的遥泵放大在超长跨距密集波分复用系统中的应用

针对长跨距密集波分复用系统中喇曼放大入纤泵浦功率过大的问题,将遥泵放大器（RP-EDFA）引入到系统中,通过对共纤RP-EDFA的噪音性能及其优化设计的研究,在理论上计算比较了RP-EDFA系统和后向喇曼放大系统在不同泵浦功率水平下的光信噪比和非线性相移,表明遥泵放大技术有效降低了入纤泵浦的功率水平,更适合长跨距应用.运用遥泵放大技术,对一个典型的长跨距系统进行系统Q值的模拟,结果表明：在 220 mW泵浦功率水平下可以实现跨距为 167 km的40×11.6 Gbit/s系统1000 km传输,Q值裕量4.4 dB.     

光纤环形镜线形腔掺Er3+光纤激光器输出特性的数值分析

在分析光纤环形镜工作原理的基础上,给出了基于光纤环形镜的线形腔掺Er3+光纤激光器相位和幅度的振荡条件.通过求解速率方程,理论分析了其输出特性,获得了稳态条件下激光器输出功率、阈值泵浦功率和斜率效率的解析表达式.推导出激光器工作所需掺Er3+光纤最短长度,并在给定泵浦光功率时,在特定输出波长上获得最大输出功率所需最佳掺Er3+光纤长度的表达式,且通过实验进行了验证.     

新型掺偶氮苯聚合物的取向增强及全息存储

研究一种新型的并列式的高密度存储材料ADPA-PVK-PBA-TNF聚合物薄膜.在非吸收区用光抽运测试法研究了薄膜光致双折射,获得光致双折射变化值Δn=1.3×10^-3,分析了该聚合物薄膜光致取向增强的物理和化学机理.探讨了抽运光对光致双折射的增强和抑制效应.在此基础上初步实现了多重角度复用信息存储、获得了较为清晰的全息存储图像.并讨论了图象存储的增强/抑制效应,利用这种效应可对存储图像处理或删除. 关键词： 掺杂偶氮苯聚合物薄膜 光致双折射 光全息存储 光致取向增强     

Fabrication and characterization of Zn1−xAlxO nanoparticles by DC arc plasma

In this paper we have introduced a simple method for the fabrication of aluminum doped zinc oxide (AZO) nanoparticles. The Zn_1−xAl_xO nanoparticles with different concentrations of Al (x=0.01, 0.03, 0.06, 0.09, 0.12) were fabricated successfully by this method. The samples were analyzed by the use of several techniques such as SEM, EDX, XRD, PL and UV-vis spectroscopy. The SEM images showed that the fabricated nanoparticles had spherical shapes. The XRD patterns of the samples indicated that the Al atoms substituted in the Zn positions in the crystal lattice of ZnO and there were some changes in the lattice parameters. A blue shift in the λ_max of the absorption and a red shift in the λ_max of the emission were observed. The results also indicated that the amount of shifts had a direct relationship with the changes in the lattice parameters.     

Analysis of polished polycrystalline diamond using dual beam focused ion beam microscopy

This paper presents a study on polycrystalline diamond (PCD) polished by dynamic friction polishing (DFP) with the aid of advanced dual beam FIB (focused ion beam) microscopy. After disclosing a variety of wear tracks by DFP using electron imaging in combination with the ion channelling effect, a dual beam FIB was successfully employed at wear track sites to specifically create both the large cross-sectional specimen for microanalysis and thin foil for nanoanalysis. The study concluded that the polished PCD subsurface was free from microscale cracking. However, the attached debris layer on the top surface contained metal oxides and non-diamond carbon phase with inhomogeneous distributions of C, Fe, Cr, Ni, Si and O across the layer. An attached layer directly above a diamond grain was composed of essentially amorphous carbon, suggesting that a direct phase transformation from diamond crystalline to amorphous occurred during DFP.     

Fracture of diamond coatings by high velocity sand erosion

This paper describes a study of the behaviour of diamond coatings when subjected to solid particle erosion from sand particles. The coatings were deposited by chemical vapour deposition (CVD) onto tungsten substrates and tested using a high velocity air–sand erosion test facility. The erosion tests were conducted using particle impact velocities of between 33 and 268 m/s. Examination of the eroded test specimens showed that the principal damage features were circumferential cracks and pin-holes. Comparison with Hertz impact theory revealed that the measured circumferential crack diameters were more than double the predicted Hertzian contact diameter. Moreover, a trend of increasing circumferential crack diameter with coating thickness, which is not predicted by Hertz, was found. Instead, the crack diameters showed good agreement with those predicted by the theory of stress wave reinforcement, which is more commonly associated with liquid impact damage of brittle materials. During impact, the bulk compression and shear waves are reflected at the rear surface of debonded regions of the coating to return to the front surface and reinforce the Rayleigh surface wave, which generates a tensile stress. Where this stress exceeds the local tensile strength of the coating, a ring of cracks surrounding the area of impact is created. The results from the present study therefore suggest that stress wave reflection is responsible for the formation of the cracks at locally debonded regions of the coating. This hypothesis was supported by images acquired using scanning acoustic microscopy, which showed that circumferential cracks and pin-holes were only found on areas of the coating that had become delaminated by multiple particle impacts during the erosion tests.     

锑掺杂氧化锡粉体的太赫兹透射特性

以SnCl45H2O和SbCl3为原料,采用液相化学共沉淀法制备锑掺杂氧化锡（ATO）粉体。分析了不同Sb掺杂质量分数条件下,ATO粉体的禁带宽度变化,并对材料在0.2~1.6 THz波段的透射时域和频域谱,以及吸收和屏蔽参数进行了对比分析。结果表明,ATO粉体的禁带宽度随着Sb掺杂量的增加先减小后增大;同时,ATO粉体对THz波的吸收系数随着Sb掺杂量的增加先增大后减小,当Sb掺杂质量分数为9%时,ATO的吸收系数在1.25 THz处达到最大值156.5 cm-1,屏蔽效能在1.24~1.60 THz范围内最高达到45.0 dB。     

40Ar+诱导无定形碳到金刚石纳米晶相变的研究

通过60 keV的⁴⁰Ar⁺辐照无定形碳靶合成了大量尺寸不同的金刚石纳米颗粒.高分辨透射电子显微镜配合能量色散X射线谱和电子衍射以及Raman谱分析的结果表明，这些嵌于具有扰动石墨结构薄膜中的纳米金刚石颗粒，其成核率很高(约为10¹³/cm²)，而且可以生长到较大的尺寸，有的甚至可以达到微米量级.对其相转变过程也进行了初步探讨. 关键词： 离子束 金刚石纳米晶 相变 透射电子显微镜     

甲基紫掺杂聚乙烯醇薄膜材料红光多重全息存储

甲基紫掺杂聚乙烯醇薄膜材料在两束相干光照射下生成相位光栅.当改变一束相干光光程,通过监测相位光栅的一级衍射信号强度的变化,可以检测相位光栅的生长和擦除过程.在此实验基础上,讨论了甲基紫掺杂聚乙烯醇薄膜材料多重全息存储的原理与结果.     

K2O-ZnO-Al2O3-B2O3-SiO2系掺Cr3+透明莫来石微晶玻璃的研究

采用了X射线衍射、透射电镜和吸收光谱及荧光光谱技术研究了K2O－ZnO-Al2O3-B2O3－SiO2系掺Cr^3 玻璃的析晶性能和光谱。研究结果表明：在K2O－Al2O3-B2O3-SiO2系掺Cr^3 玻璃的基础上引入ZnO后，析晶性能明显改善；析晶温度降低，析出的纳米莫来石微晶均匀、规则；微晶玻璃的发光强度明显增强。