Peculiarities of changes of some physicomechanical characteristics of monoisotopes B, B and natural β-boron

Real structure and some physicomechanical characteristics of the samples of natural beta-rhombohedral boron B as well as of its ¹⁰B and ¹¹B monoisotopes have been studied. It was shown that the influence of ¹⁰B and ¹¹B isotopes on physicomechanical properties of boron had a different character. In particular, the samples enriched with ¹¹B had high values of microhardness, shear modulus (SM) and elastic limit if compared to those of boron, while the samples enriched with ¹⁰B monoisotopes were characterized with high values of thermal expansion coefficient (TEC) and thermal conductivity; lattice parameters a and c increased by the sequence: ¹¹B, B, ¹⁰B. It was established that TEC, thermal conductivity, microhardness, SM and shear elastic limit increased in all samples at annealing for 5 h at 1500 °C regardless of isotope content.     

Sm2O3掺杂CeO2纳米粉体的烧结动力学

对Sm2O3掺杂CeO2纳米粉体的烧结性能进行了研究, 得出等速烧结过程中试样的线收缩率、密度、气孔率随烧结温度的变化规律, 它们随烧结温度的变化均呈"S"型曲线关系, 利用非线性回归了等速烧结过程动力学方程. 结果表明, Sm2O3掺杂CeO2纳米粉体的烧结过程分为3个阶段, 当烧结温度低于1000 ℃时, 线收缩率与密度变化较小, 处于烧结的初期; 在1000～1400 ℃时, 随着烧结温度的升高, 线收缩率与体积密度急剧增大, 材料开始烧结并致密化; 当烧结温度高于1400 ℃时, 线收缩率与体积密度趋于一恒定值, 材料已经致密化. 由归一化速率方程可知, 在T=1225 ℃时, 材料的烧结致密化速率最大.     

Preparation and Structure of [Me3N(CF3)2BCCB(CF3)2NMe3]

Bis‐trimethylamine‐ethynyl‐di‐bis(trifluoromethyl)borane [Me₃N(CF₃)₂BCCB(CF₃)₂NMe₃] ( 1 ) has been prepared from trimethylamine‐ethynyl‐bis(trifluoromethyl)borane, [HCCB(CF₃)₂NMe₃], and dimethylamino‐bis(trifluoromethyl)borane, (CF₃)₂BNMe₂. The structure of 1 has been determined by x‐ray crystallography. In the solid state the molecule possesses crystallographic C_i symmetry. The acetylenic attachment to the boron atom is characterized by a short B–C bond length of 1.565(4) Å and an essentially linear B–C–C′ bond angle of 178.1(4)°.     

Metal-Boron Compounds – Problems and Perspectives

“True” metal-boron compounds have been known for about ten years. The bonding between the metal and boron atoms can vary widely in nature: Not only simple covalent bonds are encountered but also coordinate bonds and boron-metal multicenter bonds. Furthermore, π complexes of transition metals with boron-nitrogen systems and metal complexes containing boron(I) compounds as ligands have recently also been prepared.     

硼离子对铕掺杂SiO2干凝胶发光性能的影响

采用溶胶-凝胶法制备了Al单掺和B，Al共掺的Eu掺杂SiO2干凝胶。利用荧光光谱、IR，XRD，DSC，TG／DTG等技术研究了硼离子、退火温度对样品发光性质的影响。经500℃以上退火处理用248nm激发的样品，产生Eu^3＋离子^5D0→^7FJ的特征发射，^5D0→^7F1的跃迁分裂为两个峰。比较615nm处的发光强度，掺硼酸样品的发光强度是不加硼酸发光强度的3．3倍。这是因为B离子的加入，在材料中形成了Si—O—B键，破坏了网络的对称性，加强了Eu^3＋的红光发射。当退火温度上升到850℃用350nm激发时，样品有很强的Eu^2＋蓝光发射。Al单掺的发射中心在437nm处，发射半峰宽约为70nm，而B，Al共掺样品的发光中心蓝移到425nm处，单掺样品的蓝光强度几乎是共掺样品强度的2倍。这是由于硼酸的加入改变了基质的网络结构，从而导致单掺和共掺样品发射峰位和强度的改变。     

Direct electrochemical assay of glucose using boron-doped diamond electrodes

We report linear sweep and square wave voltammetric studies on glucose oxidation at boron-doped diamond (BDD) electrodes in an alkaline medium in efforts to evaluate the techniques for electrochemically assaying glucose. The bare BDD electrode showed good linear responses to glucose oxidation for a concentration range from 0.5 to 10 mM glucose, which well encompasses the physiological range of 3-8 mM. The BDD electrodes did not experience interferences from ascorbic acid or uric acid during glucose detection. This method, when applied to real blood samples, gave results similar to those obtained by a commercial glucose monitor.     

Pressure and volume dependence of thelo-to phonons in InAs

The pressure dependence of thelo-to phonons in InAs has been investigated by Raman scattering using the diamond anvil cell. Indium arsenide transforms, presumably to the rock-salt structure at 70±1 kbar. The mode Grüneisen parameters for thelo-to phonons are γ _lo =0.99±0.03, γ _to =1.2±0.03 respectively. The effective charge,e* _T , for InAs decreases slightly with pressure and this trend is in accordance with the behaviour of other III–V zinc blende structured semiconductors: The structural phase transition is discussed in the light of theoretical calculations for phase stability of III–V compounds, as well as recent high pressure x-ray diffraction studies.     

Modeling of H2 and H2/CH4 Moderate-Pressure Microwave Plasma Used for Diamond Deposition

One-dimensional transport models of moderate-pressure H ₂ and H ₂ /CH ₄ plasmas obtained in a diamond deposition microwave reactor are presented. These models describe the plasma as a thermochemically nonequilibrium flow with three different energy modes. The solution of the one-dimensional plasma transport equations enabled the estimation of plasma species concentrations and temperatures on the axis of the reactor. As far as pure H ₂ plasmas are concerned, results showed that the model predictions of gas and vibration temperatures are in good agreement with experimental measurements. The model also yields a relatively good qualitative prediction of the variations of H-atom mole fraction with the power density absorbed by the plasma. The results obtained for H ₂ /CH ₄ discharges showed that the model prediction on the variations of H-atom mole fraction with methane percentage in the discharge is in good qualitative agreement with experimental results. They also showed that methane is rapidly converted to acetylene before reaching the discharge zone. The concentrations of neutral hydrocarbon species in the reactor are mainly governed by thermal chemistry. The addition of methane strongly affects the ionization kinetics of the plasma. Three major ions are generally obtained in H ₂ /CH ₄ plasmas: C ₂ H ₂ ⁺ , C ₂ H ₃ ⁺ , and C ₂ H ₅ ⁺ . The relative predominance of these ions depends on the considered plasma region and on the discharge conditions. The ionic species concentrations are also mainly governed by chemistry, except very near the substrate surface. Finally the use of this transport model along with the surface chemistry model of Goodwin ⁽¹⁾ enabled us to estimate the diamond growth rate for several discharge conditions.     

Stereoselective synthesis of the C14-C26 fragment of the cytotoxic macrolide FD-891

A stereoselective synthesis of the C₁₄-C₂₆ fragment of the naturally occurring, cytotoxic macrolide FD-891, is described. Asymmetric Evans aldol reactions and aldehyde Brown allylations are key steps of the synthesis.     

The chemistry of the azanonaborane cluster RNH2---B8H11NHR

The preparation and properties of the R¹R²NH---B₈H₁₁NHR cluster are described. The cluster is stable to aqueous solutions and can be made water-soluble by the introduction of a few hydrophilic groups. This makes the cluster a good candidate as the boron moiety in compounds for boron neutron capture therapy. The chemistry of the cluster preparation, the stability of the cluster, and conditions for reactions of the organic moieties are reviewed. Pyridine derivatives of the cluster show electronic interaction between the cluster and the pyridine.