Spectroscopy of low and intermediate Z elements at extreme conditions: in situ studies of Earth materials at pressure and temperature via X-ray Raman scattering

ABSTRACT

X-ray Raman scattering spectroscopy is an emerging method in the study of low and intermediate Z elements' core-electron excitations at extreme conditions in order to reveal information on local structure and electronic state of matter in situ. We discuss the capabilities of this method to address questions in Earth materials' science and demonstrate its sensitivity to detect changes in the oxidation state, electronic structure, coordination, and spin state. Examples are presented for the study of the oxygen K-, silicon L- and iron M-edges. We assess the application of both temperature and pressure in such investigations exploiting diamond anvil cells in combination with resistive or laser heating which is required to achieve realistic conditions of the Earth's crust, mantle, and core.     

Influence of annealing treatment on as-grown Ib-type diamond crystal at a high temperature and high pressure

In this paper,we report on the influence of annealing treatment on as-grown Ib-type diamond crystal under high pressure and high temperature in a china-type cubic anvil high-pressure apparatus.Experiments are carried out at a pressure of 7.0 GPa and temperatures ranging from 1700 C to 1900 C for 1 h.Annealing treatment of the diamond crystal shows that the aggregation rate constant of nitrogen atoms in the as-grown Ib-type diamond crystal strongly depends on diamond morphology and annealing temperature.The aggregation rate constant of nitrogen remarkably increases with the increase of annealing temperature and its value in octahedral diamond is much higher than that in cubic diamond annealed at the same temperature.The colour of octahedral diamond crystal is obviously reduced from yellow to nearly colorless after annealing treatment for 1 h at 1900 C,which is induced by nitrogen aggregation in a diamond lattice.The extent of nitrogen aggregation in an annealed diamond could approach approximately 98% indicated from the infrared absorption spectra.The micro-Raman spectrum reveals that the annealing treatment can improve the crystalline quality of Ib-type diamond characterized by a half width at full maximum at first order Raman peak,and therefore the annealed diamond crystals exhibit nearly the same properties as the natural IaA-type diamond stones of high quality in the Raman measurements.     

Electronic properties of anatase TiO2 doped by lanthanides: A DFT+U study

The effects of mono-doping of 4f lanthanides with and without oxygen vacancy defect on the electronic structures of anatase TiO₂ have been studied by first-principles calculations with DFT+U (DFT with Hubbard U correction) to treat the strong correlation of Ti 3d electrons and lanthanides 4f electrons. Our results revealed that dopant Ce is easy to incorporate into the TiO₂ host by substituting Ti due to its lower substitutional energy (∼−2.0 eV), but the band gap of the system almost keeps intact after doping. The Ce 4f states are located at the bottom of conduction band, which mainly originates from Ti 3d states. The magnetic moment of doped Ce disappears due to electron transfer from Ce to the nearest O atoms. For Pr and Gd doping, their substitutional energies are similar and close to zero, indicating that both of them may also incorporate into the TiO₂ host. For Pr doping, some 4f spin-down states are located next to the bottom of the conduction band and narrow the band gap of the doping system. However, for Gd doping, the 4f states are located in deep valence band and there is no intermediate band in the band gap. The magnetic moment of dopant Gd is close to the value of isolated Gd atom (∼7 μB), indicating no overlapping between Gd 4f with other orbitals. For Eu, it is hard to incorporate into the TiO₂ host due to its very higher substitutional energy. The results also indicated that oxygen vacancy defect may enhance the adsorption of the visible light in Ln-doped TiO₂ system.     

Design of a RF window for 170 GHz, 1 MW gyrotron for ECRH application

This paper describes the design of a large sized diamond window for 1 MW, 170 GHz gyrotron. The diameter and the thickness of the diamond window are 80 mm and 1.482 mm, respectively, whose edge is directly cooled by water. The CST microwave studio has been used for the S-parameter, and finite element analysis code ANSYS has been used for the thermal and the structural simulation. The return loss (S₁₁) and insertion loss (S₂₁) of the 170 GHz gyrotron window have been found −39.80 dB and −0.011 dB, respectively. The thermal and structural analysis of RF window the 397 K temperature at disk center and maximum displacement 0.01 mm has been found in the window disk during the thermal analysis.     

980 nm脉冲激发下Er3+掺杂材料中4Ⅰ13/2→4Ⅰ15/2跃迁的瞬态行为

在过去的几十年人们对Er3+掺杂的玻璃材料进行了广泛的研究,因为Er3+的4Ⅰ13/2→4Ⅰ15/2跃迁能够给出适合红外光通讯窗口的1.5 μm的发射.据我们所知,目前关于脉冲激光激发下Er3+掺杂材料1.5 μm发射的动力学行为研究报道仍很少.我们引入了转移函数理论,研究了980nm脉冲激发下Er3+的4Ⅰ13/2能级荧光的动力学行为.发现在980nm脉冲激发后,其荧光衰减遵循双指数规律,4Ⅰ13/2能级布居分为指数上升和指数下降两个过程.     

掺镱石英光纤预制棒的制备与表征

采用改进化学汽相沉积结合溶液掺杂法制备了掺镱石英光纤预制棒,并研究了不同镱掺杂浓度下的吸收光谱和发光光谱.吸收光谱和发光光谱的强度随着YbCl₃溶液浓度的增大而增强.在不产生失透的前提下,得到预制棒芯层能够掺杂的YbCl₃溶液最大浓度为0.057 mol/L.     

DX-center energy calculation with quantitative mobility spectrum analysis in n-AlGaAs/GaAs structures with low Al content

Experimental Hall data that were carried out as a function of temperature (60–350 K) and magnetic field (0–1.4 T) were presented for Si-doped low Al content (x=0.14) n–Al_xGa_1−xAs/GaAs heterostructures that were grown by molecular beam epitaxy (MBE). A 2-dimensional electron gas (2DEG) conduction channel and a bulk conduction channel were founded after implementing quantitative mobility spectrum analysis (QMSA) on the magnetic field dependent Hall data. An important decrease in 2DEG carrier density was observed with increasing temperature. The relationship between the bulk carriers and 2DEG carriers was investigated with 1D self consistent Schrödinger–Poisson simulations. The decrement in the 2DEG carrier density was related to the DX-center carrier trapping. With the simulation data that are not included in the effects of DX-centers, 17 meV of effective barrier height between AlGaAs/GaAs layers was found for high temperatures (T>300 K). With the QMSA extracted values that are influenced by DX-centers, 166 meV of the DX-center activation energy value were founded at the same temperatures.     

Phase transitions in erbium-doped silicon exposed to laser radiation

The dynamics of phase transitions induced by nanopulsed ruby laser radiation (80 nsec, 2 J/cm²) both in silicon layers doped with erbium ions and in those containing doped erbium and oxygen have been studied by an optical probing method. It is shown that the reflectivity behavior of structures under pulsed irradiation is governed by phase transitions (melting and crystallization) of implanted silicon and also by interference effects at the interfaces of the resulting phases. It is established that the profiles of erbium distribution change under nanosecond laser irradiation and that the dopant is forced out to the surface due to a segregation effect at small implantation doses. As the implanatation dose increases, diffusion deep into the sample tends to prevail over segregation. A considerable increase in the photoluminescence peak intensity at 0.81 eV is found after both the pulsed laser processing and thermal post-annealing of doped samples as opposed to spectra of samples subjected either to thermal annealing or to pulsed laser irradiation. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 76, No. 2, pp. 225–231, March–April, 2009.     

Laser in micro and nanoprocessing of diamond materials

Basic processing operations will be presented. These include diamond polishing and shaping, production of conductive pathways, micro‐ and nanostructures on the diamond surface, such as diffractive optical elements. The possibility to laser produce conductive and hollow structures in the diamond bulk, including curved elements, will be demonstrated. Finally, the techniques of laser assisted diamond CVD, that allow production of smooth or selective‐area grown films will be presented