纳米晶掺钇硬质合金粉末的制备

采用高能球磨法制备了纳米晶掺Y硬质合金粉末。用XRD，SEM和DTA等分析检测手段，研究了纳米晶掺Y硬质合金粉末的结构、形貌和相的变化。结果表明：高能球磨45h，可获得晶粒尺寸约为8nm的掺Y硬质合金粉末；微量Y的加入，有利于硬质合金粉末晶粒的细化；在25～45h范围内，随着高能球磨时间的延长，粉末晶粒尺寸减小，且掺Y硬质合金粉末的晶粒尺寸比未掺Y的硬质合金粉末晶粒尺寸要细一倍；高能球磨25h，粉末中Co的X射线衍射峰消失。高能球磨掺Y硬质合金粉末的DTA曲线在626℃出现了1个尖锐的放热峰。高能球磨掺Y硬质合金粉末固结之后，其合金晶粒细小，机械性能较好。     

Mono- and diboronates derived from tridentate ONO ligands and arylboronic acids

The syntheses of eight [4.3.0] heterobicyclic boronates containing a N → B coordinative bond are described. The monomeric compounds were prepared by reaction of arylboronic acids with a tridentate ligand having the ONO donor set of atoms. It was shown that substituents at the para-position of the B-phenyl moiety transmit electronic effects to the CN bond which in turn is polarized by formation of the N → B coordination bond. At the same time, related tridentate ligands were also reacted with 1,4-benzenediboronic acid in order to prepare benzene diboron complexes. The structure of this type of compounds was confirmed by X-ray analysis for one of the derivatives.     

Resistance to Surfactant and Protein Fouling Effects at Conducting Diamond Electrodes

Boron‐doped diamond thin‐film electrodes display negligible fouling effects in the presence of high levels of surface‐active materials, including proteins. Dramatic improvements in the stability of the analyte response (compared to common glassy carbon and carbon paste electrodes) are illustrated using bovine serum albumin (BSA), gelatin, and Triton X‐100 in connection with repetitive square‐wave voltammetric (SWV) measurements. The voltammetric response of ascorbic acid at the diamond electrode exhibits negligible shifts in peak potentials and minimal depressions of current signals over a wide range of surfactant concentrations (0–750 ppm). For example, the diamond electrode exhibited 70, 50 and 60 mV potential shifts for 10 repetitive voltammetric scans in the presence of 100 ppm BSA, gelatin and Triton X‐100, respectively, compared to 120, 190, and 280 mV shifts observed at the glassy carbon electrode. Furthermore, only 4.3 and 6.2% of the initial current decays were observed in the presence of 100 ppm Triton X‐100 and gelatin, respectively (compared to 45.2 and 34.4% diminutions at the glassy carbon electrode). Such improved performance was also confirmed from the SWV measurements of uric acid, dihydroxyphenylacetic acid, and catechol. The greatly improved resistance to surfactant interference reflects the fact that the as‐grown diamond thin film, composed of oxide‐free and hydrogen‐terminated surface, has a relatively lower surface energy and minimal electrostatic attributes, either specific or general, so that little adsorption of surface‐active agents occurs. The topographic AFM images of the diamond electrode surface confirm a negligible BSA fouling effect after repetitive SWV measurements. Such enhanced antifouling features make diamond electrodes very attractive for numerous real‐life electroanalytical applications.     

低温反应制备高纯度纳米BN包覆Al2O3和ZrO2粉体

硼酸和尿素在氮气中于650℃反应,生成t-BN-Al2O3和t-BN-ZrO2纳米包覆粉.IR分析表明,反应产物中含CH2和CN基团的杂质属尿素缩聚的复杂产物,经450℃煅烧即可除去.硼酸和尿素完全反应,得到纯净的纳米复合粉体.BN产率大于99%,在复合粉中的含量与计算值吻合.     

一种基于形成杂多核络合物的荧光增敏效应的研究 Ⅲ.锰(Ⅱ)、钴(Ⅱ)的混合荧光增敏及其连续测定

本文研究了Mn~(2+)和Co~(2+)对7-(8-羟基-3,6-二磺基萘偶氮)-8-羟基喹啉-5-磺酸-硼砂反应体系的混合荧光增敏作用。实验条件下,荧光增敏强度满足线性加和关系的范围是:Mn~(2+)浓度0～2.9×10~(-7)mol/L;Co~(2+)浓度0～8.8×10~(-7)mol/L;总浓度不超过1.0×10~(-6)mol/L。检出限量为Mn~(2+)4.5×10~(-9)mol/L和Co~(2+)1.4×10~(-8)mol/L。实现了Mn~(2+)和Co~(2+)的连续测定。     

微色谱柱分离/ICP-AES测定环境样品中的痕量硼

本文采用色谱系统对水样品（温泉水、卤水）中的硼进行分离富集，探讨了影响其分离富集的条件。实验表明，在pH＝8条件下，硼可被树脂完全吸附，用3mL 1mol/L硫酸可以从吸附术上完全解吸硼，浓缩物用ICP－AES进行测定，所建立的方法简便、准确，适合于含盐量高及其它水样品中微量硼的测定。     

Relationship between the molybdenum phases and the conversion of n-butane over Mo/HZSM-5

The conversion of n-C₄H₁₀ was undertaken on MoO₃/HZSM-5 catalyst at 773–973 K and the phases of molybdenum species were detected by XRD. The XRD results show that bulk MoO₃ on HZSM-5 can be readily reduced by n-C₄H₁₀ to MoO₂ at 773 K and MoO₂ can be gradually carburized to molybdenum carbide above 813 K. The molybdenum carbide formed from the carburization of MoO₂ with n-C₄H₁₀ below 893 K is -MoC_1−x with fcc-structure, while hcp-molybdenum carbide formed above 933 K. During the evolution of MoO₃ to MoO₂ (>773 K) or the carburization of MoO₂ to molybdenum carbide (>813 K), deep oxidation, cracking and coke deposition are serious, in particular at higher reaction temperatures, these lead to the poor selectivity to aromatics. Aromatization of n-C₄H₁₀ can proceed catalytically on both Mo₂C/HZSM-5 and MoO₂/HZSM-5, the distribution of the products for the two catalysts is similar below 813 K, but the activity for Mo₂C/HZSM-5 is much higher than that for MoO₂/HZSM-5.     

钇提高YT14硬质合金耐磨性的机制

研究了不同Ｙ添加量对ＹＴ１４硬质合金显微组织、结构和耐磨性的影响。结果表明，在ＹＴ１４硬质合金中添加微量Ｙ，可显著提高合金的耐磨性。Ｙ的主要作用是均匀细化碳化物相和Ｃｏ相；提高Ｃｏ粘结相中Ｗ、Ｔｉ元素的固溶量及αＣｏ相所占的体积分数，从而提高Ｃｏ粘结相的强韧性；Ｙ在合金中形成Ｙ２ＷＯ６，表明Ｙ还可还原和清除碳化钨表面氧化膜，增强Ｃｏ粘结相与硬质相之间的结合强度     

一种基于形成杂多核配合物的荧光增敏效应的研究（Ⅱ）──钴（Ⅱ）－7－（8－羟基－3，6－二磺基萘偶氮）－8－羟基喹啉－5－磺酸－硼（Ⅲ）三元体系的荧光性质及其分析应用

一种基于形成杂多核配合物的荧光增敏效应的研究（Ⅱ）──钴（Ⅱ）－７－（８－羟基－３，６－二磺基萘偶氮）－８－羟基喹啉－５－磺酸－硼（Ⅲ）三元体系的荧光性质及其分析应用熊国华，刘虹，俞英，黄坚锋（九江师范专科学校化学系，九江，３３２０００）（江西大学实...     

Synthesis of Ultrafine SiC Powders from Carbon-Silica Hybridized Precursors with Carbothermic Reduction

Inorganic-organic hybrid gels were prepared by simultaneous condensation of the liquid mixture of ethyl silicate, ethyl borate and water soluble phenol resin with low molecular weight. The liquid mixtures were changed into lightly colored transparent gels after a catalyst addition and stirring. The obtained gels were crushed, dried and fired in controlled conditions to yield the inorganic precursors. Since the tailored inorganic precursors mainly consisted of SiO2 and carbon, silicon carbide was formed with the heat treatments in an Ar atmosphere beyond 1773 K with carbothermic reduction. The properties and morphology of the formed silicon carbide powders in terms of the starting precursor compositions and the conditions of the carbothermic reduction were investigated with SEM, XRD and TG-DTA analysis.