Reinforcement of Self‐Healing Polyacrylic Acid Hydrogel with Acrylamide Modified Microcrystalline Cellulose†

Self‐healing hydrogel such as polyacrylic acid (PAA) hydrogel has attracted increasing attention based on its promising potential applications. However, it usually suffers from low strength especially as mechanical device. Herein, a commercial microcrystalline cellulose (MCC) was modified with acrylamide to graft polyacrylamide (PAM) chains on the particle surface. The acrylamide‐modified MCC (AM‐MCC) was then dispersed in monomer solution of acrylic acid to prepare composite hydrogel. The mechanical properties of the obtained composite hydrogels and the self‐healed hydrogels were carefully measured by compressive and tensile tests, and by dynamic mechanical analysis. Our results demonstrate that introduction of a small amount of AM‐MCC such as 3 wt% can not only reinforce the original hydrogel and the healed hydrogel markedly, but also improve self‐healing efficiency obviously. The analyses indicate that in addition to the reversible multi‐interactions such as hydrogen bonding and ionic interactions, the entanglements between the PAA chains of the hydrogel matrix and the PAM chains grafted on the MCC particles have also played an important role on the improvement in mechanical performances and the healing ability of the hydrogel. Moreover, the responsiveness to exterior ion has been tested to indicate potential application of the composite hydrogel as self‐healable sensor.     

Synthesis and Crystal Structure of [Ni(C_5H_2N_2O_4)(2,2''''bipy)(H_2O)_2]·H_2O

1 INTRODUCTION Orotic acid (H3dtpc), an important pyrimidine derivative as the effective precursor in the biosynthesis of pyrimidine base of nucleic acids in living organisms, plays a unique role in bioinorganic and pharmaceutical. Aside from the biological interest, orotic acid is also interesting in coordination chemistry. Its ketonic and enolic tautomers along with asymmetric geometry make it to be a very good versatile polydentate ligand[1~5]. The incorporation of metals into supram…     

A novel histidine assay using tetraphenylporphyrin manganese (III) chloride as a molecular recognition probe by resonance light scattering technique

A novel histidine-selective method has been developed for the determination of histidine in aqueous solutions by resonance light scattering (RLS) technique. At pH 8.0, the weak RLS intensity of tetraphenylporphyrin manganese (III) chloride [MnTPPCl] was greatly enhanced by the addition of histidine with the maximum peak located at 483 nm. Under the optimum conditions, it was found that the enhanced RLS intensity was in proportion to the concentration of histidine in the range 7.8 × 10⁻⁷-2.4 × 10⁻⁵ mol l⁻¹. Low detection limit of 9.2 × 10^-8 mol l⁻¹ has been achieved. The histidine concentrations in synthetic samples and real samples were determined with satisfactory results. The sensitivity and selectivity of this method are high enough to permit the determination of trace amounts of histidine without any significant interference from high levels of other components such as common anions and especially, other amino acids.     

Microwave-promoted cross-coupling of acid chlorides with arylboronic acids: a convenient method for preparing aromatic ketones

Simple catalytic systems for cross-coupling reactions of acyl chlorides with arylboronic acids under microwave conditions were tested. Microwave irradiation facilitated the reaction course. Mild reaction conditions afford the symmetrical and unsymmetrical aryl ketones in reasonable to high yields within a short time. A wide range of substrates bearing an electron-donating or an electron-withdrawing substituent on aryl ring of acid chloride as well as on boronic acid were examined and high yields of ketones were produced.     

3-(4-Hydroxymethylphenylsulfanyl)propanoic acid (HMPPA) as a new safety catch linker in solid phase peptide synthesis

A new safety catch linker, 3-(4-hydroxymethylphenylsulfanyl)propanoic acid (HMPPA), is described for use in solid phase peptide synthesis. The linker is readily synthesized from commercially available chemicals in a more cost efficient way compared to similar reported linkers. The HMPPA linker is easily attached to an amino derivatized solid support followed by on-resin oxidation of the thioether to sulfoxide, thereby making the linker very stable towards strong acid treatment. Final resin cleavage is performed by reductive acidolysis.     

Thermal degradation behavior of poly(4-hydroxybutyric acid)

Thermal degradation behavior of poly(4-hydroxybutyric acid) (P(4HB)) was investigated by thermogravimetric and pyrolysis-gas chromatography mass spectrometric analyses under both isothermal and non-isothermal conditions. Based on the thermogravimetric analysis, it was found that two distinct processes occurred at temperatures below and above 350 °C during the non-isothermal degradation of P(4HB) samples depending on both the molecular weight and the heating rate. From ¹H NMR analysis of the residual P(4HB) molecules after isothermal degradations at different temperatures, it was confirmed that the ω-hydroxyl chain-end was remained unchanged in the residual P(4HB) molecules at temperatures below 300 °C, while the ω-chain-end of P(4HB) molecules was converted to 3-butenoyl units at temperatures above 300 °C. In contrast, the majority of the volatile products evolved during thermal degradation of P(4HB) was γ-butyrolactone regardless of the degradation temperature. From these results, it is concluded that during the thermal degradation of P(4HB), the selective formation of γ-butyrolactone via unzipping reaction from the ω-hydroxyl chain-end predominantly occurs at temperatures below 300 °C. At temperatures above 300 °C, both the cis-elimination reaction of 4HB unit and the formation of cyclic macromolecules of P(4HB) via intramolecular transesterification take place in addition to unzipping reaction from the ω-hydroxyl chain-end. Finally, the primary reaction of thermal degradation of P(4HB) at temperatures above 350 °C progresses by the cyclic rupture via intramolecular transesterification of P(4HB) molecules with a release of γ-butyrolactone as volatile product. Moreover, we carried out the thermal degradation tests for copolymer of 93 mol% of 4HB with 7 mol% of 3-hydroxybutyric acid (3HB) to examine the effect of 3HB units on thermal stability of P(4HB).     

Synthesis and Crystal Structure of a New Copper(II) Complex with 4-Cyanobenzoic Acid

1 INTRODUCTION Exploration on the syntheses and properties of car- boxylate complexes, especially aromatic carboxylate complexes, has always been a fascinating and chal- lenging research field for decades either in coor- dination chemistry or in functional materials[1, 2]. Cy- anobenzoic acid (Hcba) possessing two functional coordination groups should display structural diver- sities on the formation of complexes[3～15]. In particu- lar, the copper(II) carboxylate complexes bearing spe- …     

Phosphomolybdic acid supported on silica gel and promoted with alkali metal ions as catalysts for the esterification of acetic acid by ethanol

Different ratios of phosphomolybdic acid PMA supported on silica gel (1–30 wt%) and promoted with alkali metal hydroxide have been prepared by an impregnation method and calcinated at 350 °C for 4 h. The catalysts were characterized by thermogravimetry (TG), differential thermal analysis (DTA), X-ray diffraction, FT-IR spectroscopy and N₂ adsorption measurements. The surface acidity and basicity of the catalysts were determined by adsorption of pyridine and the dehydration–dehydrogenation of 2-propanol. The gas-phase esterification of acetic acid by ethanol was carried out in a conventional flow bed reactor. The results clearly revealed that among the PMA loading, the use of 10 wt% catalyst showed maximum yield of ethyl acetate. This catalyst also improved on addition of Na or K-hydroxide. These results were correlated with the structure and the acid–base properties of the prepared catalysts.     

Affinity interactions between phenylboronic acid-carrying self-assembled monolayers and flavin adenine dinucleotide or horseradish peroxidase

A method is provided for the recognition of glycated molecules based on their binding affinities to boronate-carrying monolayers. The affinity interaction of flavin adenine dinucleotide (FAD) and horseradish peroxidase (HRP) with phenylboronic acid monolayers on gold was investigated by using voltammetric and microgravimetric methods. Conjugates of 3-aminophenylboronic acid and 3,3'-dithiodipropionic acid di(N-hydroxysuccinimide ester) or 11-mercaptoundecanoic acid were prepared and self-assembled on gold surfaces to generate monolayers. FAD is bound to this modified surface and recognized by a pair of redox peaks with a formal potential of -0.433 V in a 0.1 M phosphate buffer solution, pH 6.5. Upon addition of a sugar to the buffer, the bound FAD could be replaced, indicating that the binding is reversible. Voltammetric, mass measurements, and photometric activity assays show that the HRP can also be bound to the interface. This binding is reversible, and HRP can be replaced by sorbitol or removed in acidic solution. The effects of pH, incubation time, and concentration of H(2)O(2) were studied by comparing the catalytic reduction of H(2)O(2) in the presence of the electron-donor thionine. The catalytic current of the HRP-loaded electrode was proportional to HRP concentrations in the incubation solution in the range between 5 microg mL(-1) and 0.1 mg mL(-1) with a linear slope of 3.34 microA mL mg(-1) and a correlation coefficient of 0.9945.     

Syntheses and Crystal Structures of Cadmium Complexes with Thiophenedicarboxylate and Bipyridine‐like Ligands

Two new coordination polymers [Cd(tdc)(bpy)(H₂O)]_n ( 1 ) and [Cd(tdc)(phen)]_n ( 2 ) (H₂tdc = thiophene‐2,5‐dicarboxylic acid, bpy = 2,2′‐bipyridine and phen = 1,10‐phenanthroline) have been synthesized under hydrothermal condition. Their crystal structures have been established by X‐ray single‐crystal diffraction. Complex 1 crystallizes in the orthorhombic space group Fdd2 with a = 14.757(7), b = 45.38(2), c = 10.518(5) Å, V = 7044(6) ų, Z = 16; 2 in the monoclinic space group P2₁/c with a = 7.262(1), b = 21.970(2), c = 10.051(1) Å, β = 105.01(1)°, V = 1548.8(2) ų, Z = 4. Both of them are double‐stranded chains and further assembled into three‐dimensional networks by π‐π stacking interactions. 1 and 2 are stable in air, and show blue photoluminescence at 415 nm and 410 nm, respectively.