Microstructure,dielectric, and piezoelectric properties of 0.38Bi(Gax Sc1–x )O3–0.62PbTiO3 high temperature piezoelectric ceramics

0.38Bi(Ga_x Sc_1–x )O₃–0.62PbTiO₃ (BGSPTx) ceramics have been prepared by using the conventional mixed oxide method. X‐ray diffraction analysis revealed that BGSPTx has a pure perovskite structure, and the crystal symmetry of BGSPTx changed from rhombohedral to tetragonal with increasing Ga content (x). The Curie temperature (T_C) of BGSPTx ceramics is in the range of 448–467 °C for different x. The ferroelectric phase transition of BGSPTx was found to be of the first order type according to the Curie–Weiss law. For x = 0.125, BGSPTx ceramics show enhanced piezoelectric properties: piezoelectric constant d₃₃ = 420 pC/N and d₃₁ = –142 pC/N, planar and thickness electromechanical coupling factors k_p = 56.27% and k_t = 56.00%, respectively. The high‐T_C of BGSPTx coupled with its excellent piezoelectric properties suggests those future high‐temperature applications. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

In situ endpoint detection of reactive ion-beam etching of dielectric gratings with an etch-stop layer using downstream mass spectrometry

Downstream mass spectrometry is successfully used in the reactive ion-beam etching of dielectric diffraction gratings of deep grooves with vertical sidewalls to achieve in situ endpoint detection. Silica (SiO₂) gratings with a Sc₂O₃ etch-stop layer are fabricated by reactive ion-beam etching with CHF₃ as etchant, and the mass spectrometric signal of SiF₃⁺ produced by the reactive etching of the SiO₂ grating material is monitored. When the etch-stop layer is reached, a drop of this signal occurs. By comparing the monitoring curves and resulting gratings of different etching methods, we find that the decrease of the monitored signal is strongly influenced by the sidewall steepness of the etched grating grooves. All conditions being equal, the greater sidewall steepness renders the faster decrease of the signal. Consequently, the proposed approach of endpoint detection applies well to the gratings with steep sidewalls. With the help of two previously developed methods, the sidewall steepness of grating grooves is increased, and the optimal endpoint is detected. Employing the proposed technique, we have reproducibly fabricated dielectric gratings with proper groove depth and even groove bottom.     

Generalized stacking fault energy in FCC metals with MEAM

The second nearest-neighbor modified embedded atom method (2NN-MEAM) is used to investigate the generalized stacking fault (GSF) energy surfaces of eight FCC metals Cu, Ag, Au, Ni, Pd, Pt, Al and Pb. An offset is observed in all the metals for the displacement δ_us of unstable stacking fault energy from the geometrically symmetric displacement point . The offset value is the greatest for Al and the smallest for Ag. By analyzing the stable stacking fault energy γ_sf and unstable stacking fault energy γ_usf, it can be predicted that stacking fault is more favorable in Cu, Ag, Au, and especially in Pd than the other metals, while it is most preferred to create partial dislocation for Ag and to create full dislocation for Al.     

ESCA studies of nitrogen-containing stainless steels

ESCA examination of films formed on nitrogen-containing stainless steels after immersion in 0.1 M NaCl revealed that nitrogen was enriched in the outer 0.5 nm of the film at a concentration a few times higher than in the substrate. The N(1s) binding energy varied from 399.6–399.7 eV at the outermost surface of the film to 398.3–398.8 eV in the film at a depth of about 0.5 nm. This indicates a change in the chemical state of nitrogen upon exposure of the nitrogen-containing stainless steels to the solution, and furthermore, that the surface nitrogen enrichment could be of significance in the improved pitting resistance.     

Electromechanical Properties of Microcantilever Actuated by Enhanced Piezoelectric PZT Thick Film

Pb(Zr_0.53,Ti_0.47)O₃ (PZT) films with thicknesses of 0.8μm, 2μm and 4μm are prepared by a sol-gel method and their longitudinal piezoelectric coefficients are analysed. The results show that the PZT thick films, whose density is closer to bulk PZT, has the better crystallization, with d₃₃ and density much larger than those of PZT thin films. A piezoelectric microcantilever actuated by a 4-μm-thick PZT film is fabricated and its displacement is measured in different frequencies and voltages. The displacement increases linearly with the increasing bias, and the maximum displacement of 0.544μm is observed at 30kHz for 5V bias. The resonant frequency obtained in the experiment matches quite well with the theoretical result, and it is shown that the resonant frequency of PZT microcantilever could be controlled and predicated.     

Dielectric and Piezoelectric Properties of Sodium Bismuth Titanate Ceramics with KCe Substitution

The piezoelectric properties of the (KCe)-substituted sodium bismuth titanate (Na_0.5Bi_4.5Ti₄O₁₅, NBT) piezoelectric ceramics are investigated. The piezoelectric properties of NBT ceramics are significantly enhanced by (KCe) substitution. The Curie temperature Tc, and piezoelectric coefficient d₃₃ for the (KCe)-substituted NBT are found to be 663ºC, and 27pC/N, respectively. Dielectric and annealing spectroscopy resent that the (KCe) co-substituted NBT piezoelectric ceramics possess stable piezoelectric properties.     

Precise predictions for Higgs production in association with a W-boson pair at ILC

Higgs-boson production in association with a W-boson pair at e ⁺ e ⁻ linear colliders is one of the important processes in probing the coupling between the Higgs boson and vector gauge bosons and discovering the signature of new physics. We describe the impact of the complete electroweak (EW) radiative corrections of to this process in the standard model (SM) at the International Linear Collider (ILC), and investigate the dependence of the lowest-order (LO) and EW next-to-leading order (NLO) corrected cross sections on the colliding energy and the Higgs-boson mass. The LO and NLO EW corrected distributions of the invariant mass of the W-boson pair and the transverse momenta of the final W-boson and Higgs boson are presented. Our numerical results show that the relative EW radiative correction (δ _ew) varies from −19.4% to 0.2% when m _H=120 GeV and grows from 300 GeV to 1.2 TeV.     

A study of the compounds which are induced on the metallic target surface under the action of a pulsed laser plasmatron

The compounds induced on the surface of titanium and copper targets by a breakdown plasma produced by focused TEA-CO₂ high-repetition frequency laser pulses was studied by transmission electron microscopy and selected area diffraction in correlation with absorptivity data determined before and after laser irradiation. The possibility of using TEA-CO₂ lasers to produce complex thermal treatments was demonstrated for metallic surfaces by the modification of the physico-chemical properties at the sites of plasma action on these surfaces.     

Thermal oxidation of cobalt disilicide

The thermal oxidation kinetics of cobalt disilicide on Si substrates have been investigated in the temperature range of 650–1100 °C in dry oxygen and wet oxygen. A surface layer of SiO₂ grows parabolically with time. The growth rate is independent of the substrate orientation (111 or 100) and thickness of the CoSi₂ layer. We surmize that the oxidation mechanism is dominated by the diffusion of an oxidant through the growing SiO₂. Activation energies for the dry and wet oxidation are 1.49±0.05 eV and 1.05±0.05 eV, respectively. The kinetics is exactly the same as for NiSi₂ oxidation which suggest that the same mechanism controls the oxidation of these two similar suicides.     

3D structure of dendritic and hyper-branched macromolecules by X-ray diffraction

The atomic ordering in dendritic and hyper-branched macromolecules has been determined by X-ray diffraction. The approach of the atomic pair distribution function technique has been used due to the lack of 3D periodicity in these polymeric materials. Dendrimers are found to possess a semi-regular structure riddled with nanosize cavities. The cavities are joined into channels connecting dendrimer's surface and core. In contrast, hyper-branched polymers are rather irregular at the atomic scale and with less accessible interior.