LiBa0.95-yBO3:0.05Tb3+,yBi3+荧光粉的制备及荧光性质

以硼酸和碳酸盐为原料,用高温固相法制备了可被（近）紫外光（369、254 nm）有效激发的Tb³⁺单掺杂LiBa_1-xBO₃：xTb³⁺（物质的量分数x=0.02、0.03、0.04、0.05、0.06、0.07）及Bi³⁺和Tb³⁺共掺杂LiBa_0.95-yBO₃：0.05Tb³⁺,yBi³⁺（物质的量分数y=0.02、0.03、0.04、0.05、0.06、0.07）的2个系列荧光粉,产物的结构和形貌分别用粉末X射线衍射（PXRD）和扫描电子显微镜进行表征。PXRD测定结果表明2个系列的产物均为纯相LiBaBO₃。通过对第一系列产物荧光光谱的测定,筛选出发光强度最好的产物,据此确定铽离子的最佳掺杂量;在此基础上制备出铋离子掺杂量不同的第二系列荧光粉。荧光光谱测定的实验结果表明,Tb³⁺/Bi³⁺共掺杂的荧光粉的发光强度好于Tb³⁺单掺杂的荧光粉,这说明Bi³⁺对Tb³⁺有敏化作用;而且随着Bi³⁺掺杂量的增加,产物的荧光强度表现出先增加后减小的趋势,当Bi³⁺的掺杂量y=0.03时,产物的荧光强度达到最大。Bi³⁺和Tb³⁺之间存在偶极-四极相互作用而进行能量传递。系列荧光粉的CIE坐标显示其发光颜色在一定程度上呈现出由绿色光到白光的渐变趋势。     

Structure of tecophilin,a tri-caffeoylanthocyanin from the blue petals of Tecophilaea cyanocrocus, and the mechanism of blue color development

The pigment, tecophilin, in blue flowers of Tecophilaea cyanocrocus was isolated and the structure was determined to be 3-O-(6-O-α-l-rhamnopyranosyl-β-d-glucopyranosyl)-7-O-(6-O-(4-O-(2-O-(4-O-β-d-glucopyranosyl-(E)-caffeoyl)-6-O-(4-O-β-d-glucopyranosyl-(E)-caffeoyl)-β-d-glucopyranosyl)-(E)-caffeoyl)-β-d-glucopyranosyl)delphinidin. The reproduction experiment of the same color as petals according to the results of chemical analysis and measurement of vacuolar pH of blue cells clarified that the blue color solely develops by tecophilin without interaction of metal ions nor co-pigments. ¹H NMR analysis and CD spectrum indicate the co-existence of clockwise intermolecular self-association of the delphinidin nuclei and intramolecular π–π stacking between the chromophore and caffeoyl residues to derive bathochromic shift of the absorption spectrum and stabilize the color by preventing hydration reaction.     

Highly Efficient Orange and Warm White Phosphorescent OLEDs Based on a Host Material with a Carbazole–Fluorenyl Hybrid

A new carbazole–fluorenyl hybrid compound, 3,3′(2,7‐di(naphthaline‐2‐yl)‐9H‐fluorene‐9,9‐diyl)bis(9‐phenyl‐9H‐carbazole) (NFBC) was synthesized and characterized. The compound exhibits blue‐violet emission both in solution and in film, with peaks centered at 404 and 420 nm. In addition to the application as a blue emitter, NFBC is demonstrated to be a good host for phosphorescent dopants. By doping Ir(2‐phq)₃ in NFBC, a highly efficient orange organic light‐emitting diode (OLED) with a maximum efficiency of 32 cd A^?1 (26.5 Lm W^?1) was obtained. Unlike most phosphorescent OLEDs, the device prepared in our study shows little efficiency roll‐off at high brightness and maintains current efficiencies of 31.9 and 26.8 cd A^?1 at a luminance of 1000 and 10 000 cd m^?2, respectively. By using NFBC simultaneously as a blue fluorescence emitter and as a host for a phosphorescent dopant, a warm white OLED with a maximum efficiency of 22.9 Lm W^?1 (21.9 cd A^?1) was also obtained.     

o‐Fluorination of Aromatic Azides Yields Improved Azido‐Based Fluorescent Probes for Hydrogen Sulfide: Synthesis,Spectra, and Bioimaging

Hydrogen sulfide (H₂S) is an endogenously produced gaseous signaling molecule with multiple biological functions. To visualize the endogenous in situ production of H₂S in real time, new coumarin‐ and boron‐dipyrromethene‐based fluorescent turn‐on probes were developed for fast sensing of H₂S in aqueous buffer and in living cells. Introduction of a fluoro group in the ortho position of the aromatic azide can lead to a greater than twofold increase in the rate of reaction with H₂S. On the basis of o‐fluorinated aromatic azides, fluorescent probes with high sensitivity and selectivity toward H₂S over other biologically relevant species were designed and synthesized. The probes can be used to in situ to visualize exogenous H₂S and D ‐cysteine‐dependent endogenously produced H₂S in living cells, which makes them promising tools for potential applications in H₂S biology.     

Long-Term,Single-Molecule Imaging of Proteins in Live Cells with Photoregulated Fluxional Fluorophores

Single-molecule localization microscopy (SMLM) can reveal nanometric details of biological samples, but its high phototoxicity hampers long-term imaging in live specimens. A significant part of this phototoxicity stems from repeated irradiations that are necessary for controlled switching of fluorophores to maintain the sparse labeling of the sample. Lower phototoxicity can be obtained using fluorophores that blink spontaneously, but controlling the density of single-molecule emitters is challenging. We recently developed photoregulated fluxional fluorophores (PFFs) that combine the benefits of spontaneously blinking dyes with photocontrol of emitter density. These dyes, however, were limited to imaging acidic organelles in live cells. Herein, we report a systematic study of PFFs that culminates in probes that are functional at physiological pH and operate at longer wavelengths than their predecessors. Moreover, these probes are compatible with HaloTag labeling, thus enabling timelapse, single-molecule imaging of specific protein targets for exceptionally long times.     

A Rapid,Highly Sensitive and Selective Phosgene Sensor Based on 5,6-Pinenepyridine

The toxicity of phosgene (COCl₂) combined with its extensive use as a reactant and building block in the chemical industry make its fast and accurate detection a prerequisite. We have developed a carboxylic derivative of 5,6-pinenepyridine which is able to act as colorimetric and fluorimetric sensor for phosgene in air and solution. For the first time, the formation of a pyrido-[2,1-a]isoindolone was used for this purpose. In solution, the sensing reaction is extremely fast (under 5 s), selective and highly sensitive, with a limit of detection (LOD) of 9.7 nM/0.8 ppb. When fixed on a solid support, the sensor is able to detect the presence of gaseous phosgene down to concentrations of 0.1 ppm, one of the lowest values reported to date.     

Green synthesis of activated carbon doped tungsten trioxide photocatalysts using leaf of basil (Ocimum basilicum) for photocatalytic degradation of methylene blue under sunlight

Tungsten oxide (WO₃) nanoparticles were prepared hydrothermally by basil leaves extract, and Activated Carbon (AC) was prepared by the carbonization of date pits. Moreover, 1, 2 and 3% of AC doped WO₃ nanoparticles have been fabricated under hydrothermal conditions. The obtained samples have been characterized by using different techniques such as x-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), simultaneous thermogravimetric analysis (TG-DTGA), fourier transform infrared (FT-IR), BET surface area, and Ultra-Violet spectroscopy (UV–Vis). It was observed that band-gap energy of the fabricated materials decreases by increasing AC amount. Similarly, BET surface area and porosity results showed increasing the content of AC, surface area, pore size and pore volume were decreased. The functional groups, determined by FT-IR, played a significant role in the photocatalytic performance. The photocatalytic performance of fabricated samples was used for the degradation of methylene blue (MB) at neutral pH under visible light radiations, and it is observed that WO₃/3%AC photocatalyst showed the highest degradation of MB. Both, capped phytochemicals of basil extract and the nanocomposites, were improved the photocatalytic performance, about 94% photodegradation was observed within 25 min under the reaction conditions. The photocatalyst was stable and about 85% and 81% photodegradation of MB were found under the two times of reusability tests.     

Synthesis of Fluorescent Carbon Dots and Their Application in Ascorbic Acid Detection

Water-soluble fluorescent carbon dots (CDs) were synthesized by a hydrothermal method using citric acid as the carbon source and ethylenediamine as the nitrogen source. The repeated and scale-up synthetic experiments were carried out to explore the feasibility of macroscopic preparation of CDs. The CDs/Fe³⁺ composite was prepared by the interaction of the CDs solution and Fe³⁺ solution. The optical properties, pH dependence and stability behavior of CDs or the CDs/Fe³⁺ composite were studied by ultraviolet spectroscopy and fluorescence spectroscopy. Following the principles of fluorescence quenching after the addition of Fe³⁺ and then the fluorescence recovery after the addition of asorbic acid, the fluorescence intensity of the carbon dots was measured at λex = 360 nm, λem = 460 nm. The content of ascorbic acid was calculated by quantitative analysis of the changing fluorescence intensity. The CDs/Fe³⁺ composite was applied to the determination of different active molecules, and it was found that the composite had specific recognition of ascorbic acid and showed an excellent linear relationship in 5.0–350.0 μmol·L⁻¹. Moreover, the detection limit was 3.11 μmol·L⁻¹. Satisfactory results were achieved when the method was applied to the ascorbic acid determination in jujube fruit. The fluorescent carbon dots composites prepared in this study may have broad application prospects in a rapid, sensitive and trace determination of ascorbic acid content during food processing.     

Ultrafast Fluorescence Spectroscopy via Upconversion and Its Applications in Biophysics

In this review, the experimental set-up and functional characteristics of single-wavelength and broad-band femtosecond upconversion spectrophotofluorometers developed in our laboratory are described. We discuss applications of this technique to biophysical problems, such as ultrafast fluorescence quenching and solvation dynamics of tryptophan, peptides, proteins, reduced nicotinamide adenine dinucleotide (NADH), and nucleic acids. In the tryptophan dynamics field, especially for proteins, two types of solvation dynamics on different time scales have been well explored: ~1 ps for bulk water, and tens of picoseconds for “biological water”, a term that combines effects of water and macromolecule dynamics. In addition, some proteins also show quasi-static self-quenching (QSSQ) phenomena. Interestingly, in our more recent work, we also find that similar mixtures of quenching and solvation dynamics occur for the metabolic cofactor NADH. In this review, we add a brief overview of the emerging development of fluorescent RNA aptamers and their potential application to live cell imaging, while noting how ultrafast measurement may speed their optimization.     

爆炸物原料过氧化氢的比色和荧光可视化检测方法探讨

近年来,爆炸恐怖袭击严重威胁人民群众的生命和财产安全。通常,爆炸物分为制式爆炸物和非制式爆炸物两类。其中,过氧化物类爆炸物（PBEs）由于具有原料易得、容易合成且爆炸威力巨大等特点,成为恐怖分子的首选。由于H2O2不仅是制备PBEs的前驱体,而且还是PBEs的分解产物,目前常通过检测H2O2实现间接检测PBEs。此外,H2O2和燃料混合也是威力巨大的爆炸物。因此,爆炸物原料H2O2的检测对于国家安全和社会稳定具有十分重要的意义。与其它检测方法相比,比色和荧光检测方法因特异性好、灵敏度高、结果可视化、操作简单和便于现场检测等优点而受到广泛关注。该文主要综述了H2O2的比色和荧光可视化检测方法,并在此基础上,对这两种方法的发展趋势进行了展望,以期为相关领域研究人员提供理论支持和技术参考。