X-射线荧光光谱法测定钛铁中的硅、锰、磷、铝

介绍用X-射线荧光光谱仪测定钛铁中Si、Mn、P、Al含量的方法,通过试验确定了合适的研磨时间、压力和保压时间,用压片法制样,建立了各元素的工作曲线,各元素的测定范围分别为Si3.00%～6.00%,Mn1.00%～3.00%,P0.030%～0.070%,Al5.00%～9.00%。通过强度测量得到测定Si、Mn、P、Al的相对标准偏差分别为0.074%、0.308%、0.383%、0.040%,精密度满足测试要求。将该方法测定结果与化学法比对,准确度满足国家标准方法分析误差的要求。     

Characterization and properties of the copper(II/I) complexes of macrocyclic hexathiaether ligand [21]aneS6

The copper(II/I) complexes of hexathiaether macrocyclic ligand, 1,4,8,11,15,18-hexathiacyclohenicosane ([21]aneS₆), were synthesized, and characterized by electrochemical and spectroscopic techniques. Cyclic voltammetric studies indicate that Cu([21]aneS₆)^2+/+ forms a reversible one-electron redox couple. The electrochemical potential obtained for Cu([21]aneS₆)^2+/+ (E^f = 0.89 V, against SHE) was found to be the highest potential reported to date for a Cu^2+/+ macrocyclic system in aqueous solution. By employing the Nernst equation, we can infer that the practical upper limit for formal potential of Cu(II/I)L systems maybe close to this high value. Stability constant data obtained for these complexes indicate that Cu([21]aneS₆)⁺is 12 orders of magnitude greater in stability than that of Cu([21]aneS₆)²⁺ indicating the favorable nature of this large macrocyclic ligand towards formation of Cu(I) complexes over Cu(II) complexes. Crystal structure of Cu([21]aneS₆)⁺ ( Fig. 2) shows that four sulfurs adjacent to one another are coordinated to Cu⁺ ion in this complex. Bond angles and distances calculated for the crystal indicate that it is a distorted tetrahedron, a geometry commonly encountered by Cu(I) complexes. This is the first report of synthesis and characterization of a metal coordinated [21]aneS₆ complex.     

Forensic classification of ballpoint pen inks using high performance liquid chromatography and infrared spectroscopy with principal components analysis and linear discriminant analysis

Several varieties of blue ballpoint pen inks were analyzed by high performance liquid chromatography (HPLC) and infrared spectroscopy (IR). The chromatographic data extracted at four wavelengths (254, 279, 370 and 400 nm) was analyzed individually and at a combination of these wavelengths by the soft independent modeling of class analogies (SIMCA) technique using principal components analysis (PCA) to estimate the separation between the pen samples. Linear discriminant analysis (LDA) measured the probability with which an observation could be assigned to a pen class. The best resolution was obtained by HPLC using data from all four wavelengths together, differentiating 96.4% pen pairs successfully using PCA and 97.9% pen samples by LDA. PCA separated 60.7% of the pen pairs and LDA provided a correct classification of 62.5% of the pens analyzed by IR. The results of this study indicate that HPLC coupled with chemometrics provided a better discrimination of ballpoint pen inks compared to IR. The need to develop a suitable IR method for analysing blue ballpoint pen inks has been emphasized and it is hoped that the development of such a method would indeed provide a valuable tool for the non-destructive analysis of blue ballpoint pen ink samples for forensic purposes.     

Preparation of lucifer yellow fluorescent liposomes: A method for cells' membrane labeling

This report describes a method to conjugate lucifer yellow to the external surface of liposomes. The heterobifunctional cross-linking reagentN-succinimidyl 3-(2-pyridyldithio)propionate has been used to activate DMPE molecules. The DMPE-dithiopyridine product has been mixed with DMPC to prepare liposome vesicles. These have been reduced by DTT and finally reacted with lucifer yellow-iodoacetamide to produce the fluorescence-labeled vesicles. The quenching of their fluorescence intensity by Kl is consistent with fully exposed fluorophores. The decay of the fluorescence intensity of the lipid-bound lucifer yellow is biexponential (₁=7.9 ns; ₂=1.1 ns), with a relative yield of 0.16. When the fluorescent liposomes are mixed with cells, the lucifer yellow-DMPE derivative is transferred. Boar spermatozoa and peripheral human blood lymphocytes have been used as cellular models. The extent of incorporation is dependent on the incubation time and temperature. At 36°C, lucifer yellow fluorescence appears in the spermatozoa cells after 10 min of incubation and reaches its maximum at about 60 min. The fluorescent phospholipid derivative seems to incorporate specifically into membrane structures. The highest labeling ratio is observed with integer, scarcely motile, spermatozoa. A poorer labeling yield (15%) is found with lymphocytes. Interestingly, photobleaching due to epiillumination of the labeled cells is apparently negligible and cells are clearly visible after irradiation times ranging from several minutes to few hours.A preliminary account of this work was presented at the Quarto Simposio su Biotecnologie Biochimiche, Capri, 28–30 June 1992.     

普鲁士蓝薄膜的电积法制备及其化学组成

在金属和石墨基底电极上用恒电位沉积法制备出普鲁士蓝(PB)薄膜,研究了影响膜生长的多种因素;观察到PB膜的电化学活性。用红外光谱及电子能谱对膜的化学组成作了分析,结果表明,最初制备的膜为不溶性PB:Fe_4[Fe(CN)_6]_3,在含K~+的电解质溶液中经电化学反应后膜部分转变为可溶性PB:KFeFe(CN)_6,由此确定了PB膜的电化学反应式。     

Evaluation of recombinant green fluorescent protein, under various culture conditions and purification with HiTrap hydrophobic interaction chromatography resins

To determine the influence of various culture conditions, transformed cells of Escherichia coli expressing recombinant green fluorescent protein (GFPuv) were grown in nine cultures with four variable conditions (storage of inoculated broth at 4°C prior to incubation, agitation speed, isopropyl-β-d-thiogalactopyranoside [IPTG] concentration, and induction time). The pelleted cells were resuspended in extraction buffer and subjected to the three-phase partitioning (TPP) extraction method. To determine the most appropriate purification resin, protein extracts were eluted through one of four types of HiTrap hydrophobic interaction chromatography (HIC) columns prepacked with methyl, butyl, octyl, or phenyl resins and analyzed further on a 12% sodium dodecylsulfatepolyacrylamidegel. With Coomassie staining, a single band between 27 (standard GFPuv) and 29 kDa (molecular weight standard) was visualized for every HIC column sample. TPP extraction with HIC elution provided about 90% of the GFPuv recovered and eight-fold GFPuv enrichment related to the specific mass. Rotary speed and IPTG concentration showed, respectively, greater negative and positive influences on GFPuv expression at the beginning of the logarithmic phase for the set culture conditions (37°C, 24-h incubation).     

等离子体聚萘薄膜作发光层的蓝色发光二极管

等离子体聚萘薄膜作发光层的蓝色发光二极管马於光，唐建国，张海峰，沈家骢，刘式墉，刘晓东（吉林大学分子光谱与分子结构开放实验室，集成光电子学国家重点实验室，长春，１３００２３）（白求恩医科大学）关键词等离子体聚合物，蓝光，发光二极管Ｂｕｒｒｏｕｇｈｅｓ...     

等色染料离子对萃取光度法研究：Ⅰ.溴酚蓝·亚甲蓝体系

研究了溴酚蓝（ＢＰＢ）·亚甲蓝（ＭＢ）等色染料离子对萃取光度测定银、汞和铜的方法。首先将被测金属离子形成［Ｍｅ（ｐｈｅｎ）３］ＢＰＢ的二氯乙烷萃取液，用ＫＣＮ解析并反萃入水相，而后加入和溴酚蓝等色的亚甲蓝溶液继续萃取。由于等色染料离子对和Ｍｅ（ＣＮ）ｎＢＰＢ三元络合物同时进入二氯乙烷中而提高了灵敏度、测定Ａｇ、Ｈｇ和Ｃｕ的摩尔吸光系数均在１０５Ｌ·ｍｏｌ（－１）·ｃｍ（－１）以上。     

一种基于形成杂多核络合物的荧光增敏效应的研究 Ⅲ.锰(Ⅱ)、钴(Ⅱ)的混合荧光增敏及其连续测定

本文研究了Mn~(2+)和Co~(2+)对7-(8-羟基-3,6-二磺基萘偶氮)-8-羟基喹啉-5-磺酸-硼砂反应体系的混合荧光增敏作用。实验条件下,荧光增敏强度满足线性加和关系的范围是:Mn~(2+)浓度0～2.9×10~(-7)mol/L;Co~(2+)浓度0～8.8×10~(-7)mol/L;总浓度不超过1.0×10~(-6)mol/L。检出限量为Mn~(2+)4.5×10~(-9)mol/L和Co~(2+)1.4×10~(-8)mol/L。实现了Mn~(2+)和Co~(2+)的连续测定。     

Signaling molecularly imprinted polymers: molecular recognition-based sensing materials

Molecular imprinting is a template polymerization technique that can easily provide synthetic polymers capable of molecular recognition for given target molecules. In addition to their highly specific recognition ability, we are attempting to introduce signaling functions to molecularly imprinted polymers, enabling them to respond according to specific binding events. Some of our work regarding such signaling molecularly imprinted polymers is presented here, including molecularly imprinted polymers that induce spectral shifts of target compounds because of binding. Such compounds include hydrogen-bonding-based fluorescent imprinted polymers and metalloporphyrin-based signaling molecularly imprinted polymers.