Synthesis and Crystal Structure of Blue Luminescent Cadmium(II) Coordination Networks with 4,4′-Bis(imidazol-1-ylmethyl)biphenyl from Different Solvent Systems

Two supramolecular complexes, [Cd(bimb)²Cl²] (1) and [Cd(bimb)(DMF)Cl²]·DMF (2) [bimb=4,4′-bis(imidazol-1-ylmethyl)biphenyl], were synthesized by reactions of CdCl²·2.5H²O with bimb ligand in ethanol and N,N′-dimethylformamide (DMF), respectively, and their structures were determined by X-ray crystallography. Complex 1 is an infinite 2D grid network bridged by bimb ligands, and the 2D sheets were further linked by C–H ?Cl hydrogen bonds to form a polycatenated 3D framework. Complex 2 has dicadmium(II) di-μ-chloride units which are connected by bimb bridging ligands to form an infinite non-interpenetrating 2D network. The results provide a nice example of the solvent system exerting a great effect on the construction of supramolecular frameworks.     

Blue TiO2 nanotube arrays as semimetallic materials with enhanced photoelectrochemical activity towards water splitting

In the past years there has been a great interest in self-doped TiO₂ nanotubes (blue TiO₂ nanotubes) compared to undoped ones owing to their high carrier density and conductivity. In this study, blue TiO₂ nanotubes are investigated as photoanode materials for photoelectrochemical water splitting. Blue TiO₂ nanotubes were fabricated with enhanced photoresponse behavior through electrochemical cathodic polarization on undoped and annealed TiO₂ nanotubes. The annealing temperature of undoped TiO₂ nanotubes was tuned before cathodic polarization, revealing that annealing at 500 °C improved the photoresponse of the nanotubes significantly. Further optimization of the blue TiO₂ nanotubes was achieved by adjusting the cathodic polarization parameters. Blue TiO₂ nanotubes obtained at the potential of –1.4 V (vs. SCE) with a duration of 10 min exhibited twice more photocurrent response (0.39 mA cm^-2) compared to the undoped TiO₂ nanotube arrays (0.19 mA cm^-2). Oxygen vacancies formed through the cathodic polarization decreased charge recombination and enhanced charge transfer rate; therefore, a high photoelectrochemical activity under visible light irradiation could be achieved.     

Tuning of Photonic band gap via combined effect of electric and optical fields in a blue phase liquid crystal composite

ABSTRACT

Blue phase liquid crystals are soft 3D photonic crystals in which the liquid crystal molecules self-assemble to form a cubic structure with lattice spacing of a few hundred nanometers resulting in selective reflection of colours in the visible spectrum. The corresponding wavelength or the ‘photonic band gap’ can be tuned using various external stimuli such as thermal, electric, magnetic and optical fields. Here, we report efficient tuning of photonic band gap by utilising the combination of electric and optical fields in a blue phase liquid crystalline system. The studies indicate that the chirality of the medium has a direct bearing on the direction of the wavelength shift and the extent of the photonic band gap tunability. More importantly, the synergistic effect of the two fields helps in reversible tuning of the band gap.     

Determination of the swelling behavior of superabsorbent polymers by a tracer-assisted on-line spectroscopic measurement

This work reports on a method for the accurate determination of kinetic swelling behavior and properties of superabsorbent polymers by a tracer-assisted on-line spectroscopic measurement. Based on monitoring the spectral absorption of a tracer compound (blue dextran 2000) at 610 nm in a superabsorbent polymer containing solution, the swelling (water absorption) of the polymer during the process can be followed, from which the parameters in a kinetic equation can be obtained. The results showed that the data obtained by the present method has a good measurement precision and accuracy, in which the relative differences were less than 4.0% when comparing the data measured by a reference method (i.e., the tea bag method). Since the present method can perform an on-line measurement, it is much superior to the current tea bag method and therefore is very suitable to be used in the process related study for the swelling behavior of superabsorbent polymers in many applications.     

Direct Blue 71 staining as a destaining‐free alternative loading control method for Western blotting

In Western blotting, a suitable loading control is indispensable for correcting errors in the total amount of loaded protein. Immunodetection of housekeeping proteins and total protein staining have traditionally been used as loading control methods. Direct Blue 71 (DB71) staining—a novel, sensitive, dye‐binding staining method compatible with immunodetection—may offer advantages over these traditional loading control methods. Three common neuroscientific samples (human plasma, human oligodendrocytes, and rat brain) were employed to assess DB71 staining as a loading control method for Western blotting. DB71, CBB, one traditional housekeeping protein, and one protein of interest were comparatively assessed for reliability and repeatability and linear dynamic range over 2.5–40 μg of protein loaded. DB71's effect on the reliability and repeatability and linear dynamic range of immunoreaction were also assessed. Across all three sample types, DB71 was either equivalent or superior to CBB and housekeeping protein‐based methods in terms of reliability and repeatability and linear dynamic range. Across all three sample types, DB71 staining did not impair the reliability and repeatability or linear dynamic range of immunoreaction. Our results demonstrate that the DB71 staining can be used as a destaining‐free alternative loading control method for Western blotting.     

Structure of tecophilin,a tri-caffeoylanthocyanin from the blue petals of Tecophilaea cyanocrocus, and the mechanism of blue color development

The pigment, tecophilin, in blue flowers of Tecophilaea cyanocrocus was isolated and the structure was determined to be 3-O-(6-O-α-l-rhamnopyranosyl-β-d-glucopyranosyl)-7-O-(6-O-(4-O-(2-O-(4-O-β-d-glucopyranosyl-(E)-caffeoyl)-6-O-(4-O-β-d-glucopyranosyl-(E)-caffeoyl)-β-d-glucopyranosyl)-(E)-caffeoyl)-β-d-glucopyranosyl)delphinidin. The reproduction experiment of the same color as petals according to the results of chemical analysis and measurement of vacuolar pH of blue cells clarified that the blue color solely develops by tecophilin without interaction of metal ions nor co-pigments. ¹H NMR analysis and CD spectrum indicate the co-existence of clockwise intermolecular self-association of the delphinidin nuclei and intramolecular π–π stacking between the chromophore and caffeoyl residues to derive bathochromic shift of the absorption spectrum and stabilize the color by preventing hydration reaction.     

Green synthesis of activated carbon doped tungsten trioxide photocatalysts using leaf of basil (Ocimum basilicum) for photocatalytic degradation of methylene blue under sunlight

Tungsten oxide (WO₃) nanoparticles were prepared hydrothermally by basil leaves extract, and Activated Carbon (AC) was prepared by the carbonization of date pits. Moreover, 1, 2 and 3% of AC doped WO₃ nanoparticles have been fabricated under hydrothermal conditions. The obtained samples have been characterized by using different techniques such as x-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), simultaneous thermogravimetric analysis (TG-DTGA), fourier transform infrared (FT-IR), BET surface area, and Ultra-Violet spectroscopy (UV–Vis). It was observed that band-gap energy of the fabricated materials decreases by increasing AC amount. Similarly, BET surface area and porosity results showed increasing the content of AC, surface area, pore size and pore volume were decreased. The functional groups, determined by FT-IR, played a significant role in the photocatalytic performance. The photocatalytic performance of fabricated samples was used for the degradation of methylene blue (MB) at neutral pH under visible light radiations, and it is observed that WO₃/3%AC photocatalyst showed the highest degradation of MB. Both, capped phytochemicals of basil extract and the nanocomposites, were improved the photocatalytic performance, about 94% photodegradation was observed within 25 min under the reaction conditions. The photocatalyst was stable and about 85% and 81% photodegradation of MB were found under the two times of reusability tests.     

Blue electroluminescence of a novel Zn~(2+)–β-diketone complex with a carbazole moiety

In this letter, a novel zinc complex of Zn(ECTFBD)2 was synthesized by an environment-friendly grinding technique in high yield. Its structure was confirmed by1H NMR, MS and EA. HECTFBD is 1-(9-ethyl-9Hcarbazol-3-yl)-4,4,4-trifluorobutane-1,3-dione. Zn(ECTFBD)2-based light-emitting devices were fabricated. The architecture of the devices was ITO/PEDOT(40 nm)/100 wt% PVK: 40 wt% OXD-7: x wt% Zn(ECTFBD)2(85 nm)/CsF(1.5 nm)/Al(100 nm), where x = 1, 5, and 10(relative to the mass of PVK and OXD-7). The three devices displayed blue emissions with peaks at 450, 458, and 460 nm, respectively. A maximum luminous efficiency of 0.86 cd/A and a luminance of 228 cd/m2were achieved by the 1 wt% doped device. So, we demonstrated further that Zn2+–b-diketone complexes can be effectively severed as a class of new electroluminescent materials. In addition, the thermal stability of Zn(ECTFBD)2 was tested and the UV–vis and photoluminescent behaviors of Zn(ECTFBD)2 in CH2 Cl2 were investigated.     

TADF激基复合物主体材料提升溶液法制备蓝色荧光有机发光二极管的效率

为了提升溶液法制备的蓝色荧光有机发光二极管(OLEDs)的效率,采用了基于热激活延迟发光(TADF)的激基复合物作为主体材料。TADF激基复合物主体可以利用反向系间窜跃上转换形成单线态激子并将能量传递到客体,从而可以同时利用发光层中的三线态激子和单线态激子,以提升蓝色荧光器件的效率。选择蓝色荧光材料1-4-Di-[4-(N,N-diphenyl)amino]styryl-benzene(DSA-ph)作为客体发光材料,4,4′,4″-T-ris(carbazol-9-yl)triphenylamine(TCTA)掺杂1,3,5-Tri(1-phenyl-1H-benzo[d]imidazol-2-yl)phenyl)(TPBi)作为热激活延迟荧光激基复合物主体,通过溶液法制备了蓝色荧光OLEDs。通过测试TCTA,TPBi以及TCTA掺杂TPBi的光致发光光谱发现,与TCTA和TPBi相比,TCTA掺杂TPBi的光致发光谱(PL)发生了明显的红移(峰值波长变为437 nm),而且光谱变宽,证明了TCTA∶TPBi激基复合物的形成。通过对于DSA-ph掺杂激基复合物主体的薄膜与DSA-ph掺杂poly(methyl methacrylate)(PMMA)的薄膜进行PL测试发现,两者发光峰相同,都是来自DSA-ph的发光,说明激基复合物主体将能量传递到了DSA-ph;DSA-ph的吸收光谱与激基复合物主体的PL光谱存在很大重叠,说明激基复合物主体与DSA-ph的能量传递非常有效;通过对激基复合物主体掺杂不同浓度客体的薄膜进行瞬态PL衰减测试发现,与纯DSA-ph的寿命相比,DSA-ph掺杂激基复合物主体之后其寿命会延长,纯DSA-ph的寿命只有1.19 ns,DSA-ph掺杂激基复合物主体的荧光衰减曲线与激基复合物主体的荧光衰减曲线相似,这进一步证明了激基复合物主体将能量传递到了DSA-ph。研究了主体引入以及DSA-ph掺杂浓度对器件性能的影响。对于器件的亮度、电流密度、电压、电流效率、电致发光光谱等参数进行了测试,与不采用激基复合物主体的器件相比,采用激基复合物主体的器件性能明显改善,在DSA-ph掺杂浓度为10%时,器件亮度从2133.6 cd·m^-2提升到了3597.6 cd·m^-2,器件效率从1.44 cd·A-1提升到了3.15 cd·A-1,发光峰只有来自DSA-ph的发光。采用TADF激基复合物主体的方法有潜力实现溶液法制备的高效蓝色荧光OLEDs。     

普鲁士蓝修饰电极结合硅溶胶-凝胶技术制备高灵敏葡萄糖传感器

基于普鲁士蓝修饰玻碳电极结合二氧化硅溶胶 凝胶固定化酶技术构造具有“三明治”式结构的酶电极。考察了酶电极对葡萄糖的电化学响应以及操作条件。结果表明 :所制备的传感器在pH 6 .5 ,电位为- 0 .0 5V条件下对葡萄糖在 0～ 5mmol/L呈线性响应 ,响应时间为 12s ,检出限为 0 .0 2mmol/L ,灵敏度高达1 182 μA/ (mmol·L-1)。传感器的稳定性好 ,4 5d其响应值仍保持 90 %。