单纯形法计算薄膜常数

本文首次报道了用单纯形加速法计算正常兔ＩｇＧ抗原与羊－抗兔抗体反应的抗体层厚度和光学常数，该方法假定抗体层厚度、光学常数均为时间的函数，避免了以往只假定厚度为时间函数所造成的误差。结果表明该方法计算抗体层薄膜常数是可行的。     

Microscopic phenomena found within enclosed surface laser ablation of 20 nm thick aluminium films

This paper investigates the microscopic features which occur when a four-layered film is ablated using Q-switched Nd:YAG laser. The four-layered films consist of a vacuum-deposited aluminium layer (0.02 μm) upon an oriented polypropylene (OPP) film (30 μm) which has been laminated using an inert adhesive and a second OPP film. Laser radiation is absorbed principally by the aluminium layer, melting and/or vaporising it. Upon cooling, the aluminium layer is rearranged into discrete microscopic particles, which give laser-treated areas of the film a transparent appearance. Within the films are found microscopic features, which can be divided into three distinct types: aluminium demetallisation features, polymer distortion features and particle features. Features from each of these categories can exist within a single laser track depending upon the laser parameters used for transparentisation.     

Langmuir-Blodgett self-assembly and electrochemical catalytic property of FePt magnetic nano-monolayer

Dispersed-well FePt nanoparticles with particle size ~5 nm have been prepared by hydrazine hydrate reduction of H₂PtCl₆·6H₂O and FeCl₂·4H₂O in ethanol–water system. By employing as-synthesized FePt nanoparticles, the monolayer can be formed by LB Technique. The structural, magnetic properties and electrochemical properties of FePt monolayer were respectively studied by XRD, TEM, VSM and CHI 820 electrochemical workstation. The as-synthesized particle has a chemically disordered fcc structure and can be transformed into chemically ordered fct structure after annealing treatment above 400°C. The coercivity of ordered fct FePt phase can be up to 2515Oe. CVs of 0.5 M H₂SO₄/0.5M CH₃OH on GCE modified with FePt nanoparticles monolayer films illustrate that the as-synthesized FePt is a kind of active electrochemical catalyst.     

Effect of film thickness on interface and electric properties of BiFeO3 thin films

Bismuth ferrite (BFO) thin films were fabricated by RF-magnetron sputtering deposition method on Pt/Ti/SiO₂/Si(1 0 0) substrate. The effect of the thickness of BFO films varying from 85 to 280 nm on electrical properties was investigated. Saturated coercive fields were found to increase with the BFO film thickness. The dielectric constant of BFO thin films measured at 1 kHz decreased with decreasing thickness from 98 to 86, while tangent losses increased from 0.013 to 0.021. The presence of bismuth oxide at the interface between BFO films and Pt bottom electrodes was responsible for the high leakage currents in thin BFO thin films as was demonstrated by X-ray diffraction, grazing-incident X-ray diffraction, and secondary ion mass spectroscopy analysis.     

Growth of Pt thin films on WSe2

The morphology and structure of Pt deposited on a WSe₂(0 0 0 1) van der Waals surface have been investigated by reflection high energy electron diffraction and scanning tunneling microscopy. At room temperature, the initial growth is characterized by the formation of three-dimensional fcc Pt islands with (1 1 1) orientation. In contrast, at higher temperatures of about 450 °C the formation of a novel chemically ordered Pt-Se alloy is observed. Based on the diffraction patterns, a tetragonal DO₂₂-type structure of a Pt₃Se compound is suggested. With increasing Pt thickness, this chemically ordered alloy disappears and an additional superstructure occurs, which is accompanied by the coalescence of the islands. The observed superstructure is attributed to a strong Se diffusion towards the growth surface, forming most likely a PtSe₂ alloy with the CdI₂-type layered structure on the top surface. Due to the lateral lattice mismatch between the Pt(1 1 1) layers and the PtSe₂(1 1 1) top layer, a Moiré pattern with a period of 1.1 nm is created, which might be used as a long-range atomic pattern for further nanostructure growth.     

Subphase pH effect on composition and structure of Fe(III) arachidate monolayers

The arachidic acid monolayers on Fe(III) subphase surfaces with various pH values have been studied. The π–A isotherms of monolayers and Fourier transform infra-red (FTIR) spectra of Langmuir–Blodgett (LB) films show that the films obtained on different pH subphases with a concentration of Fe(III) 5×10⁻⁵ M have different compositions. At low pH (2.4), the film appears to be almost 100% acid. The content of Fe(III) arachidate increases with increasing pH, at pH 3.7, the film appears to be 100% salt; and the content of salt decreases with pH larger than 3.7. The transmission electron microscope (TEM) observations show that the monolayer structures changed from patch aggregates formed by Fe(III) arachidate at low pH to a network or dotted structures formed by hydrolysates of Fe(III) at high pH. The Brewster angle microscopy (BAM) experiments show the different monolayer behaviors at various pH. These results indicate that the subphase pH greatly influenced the arachidic acid monolayers.     

Properties of mixed protein/surfactant adsorption layers

The adsorption isotherms, adsorption kinetics and surface rheological properties of β-lactoglobulin, β-casein, in the absence and presence of Tween 20 were measured. To study the adsorption process (isotherms and kinetics) at the water–air interface the pendant drop technique (axial drop shape analysis, ADSA), and ring tensiometry were used. The surface shear rheological parameters were measured with a torsion pendulum set-up. Also, data of the equilibrium film thickness and surface diffusion coefficients obtained from fluorescence recovery after photobleaching (FRAP) measurements are used to understand the competitive adsorption mechanism. The adsorption process and shear rheological behaviour of the studied systems show a rather complex behaviour which depends most of all on the system's composition. At high protein or surfactant content the behaviour is controlled by the main component while for the more mixed systems the adsorption process is complex and consists of partial adsorption, surfactant–protein interaction and protein rearrangement as a function of surface coverage. The results obtained illustrate that all these processes must be taken into account in future new theoretical models to be derived for such systems.     

Langmuir–Blodgett films of pyridinium-dicyanomethanide dyes mixtures with photobleachable absorption bands

We report on Langmuir-Blodgett (LB) films characterization of 4-[5-dicyanomethanido)thien-2-y1]-N-(n-hexadecyl)pyridinium (C₁₆H₃₃-PDCNT), and 1-(N-(n-hexadecy]-4-pyridinio)-2-[5-(dicyanomethanido)thien-2-yl]ethene (C₁₆H₃₃-PDCNTE); LB films of the pure compounds and of the mixtures of the two compounds were prepared at 291 K: UV-vis investigation revealed the presence of photobleachable absorption bands, the ones at about 530 nm and 640 nm were due to charge transfer transitions of the monomer of C16H33-PDCNT and C₁₆H₃₃-PDCNTE, respectively; the sharp, photobleachable ones shifted to shorter wavelengths were due to H-aggregates of the two compounds. By changing the molar ratios of the two compounds in the mixtures and in other cases by annealing the LB films, the absorption maxima of the sharp, photobleachable bands due to H-aggregates could be tuned in the range 415–467 nm. These LB films are thus very promising in view of optical data storage applications.     

Film forming kinetics and reaction mechanism of γ-glycidoxypropyltrimethoxysilane on low carbon steel surfaces

The film forming kinetics and reaction mechanism of γ-GPS on low carbon steel surfaces was investigated by FTIR-ATR, AFM, NSS and theoretical calculation method. The results from experimental section indicated that the reaction of γ-GPS on low carbon steel surfaces followed the conventional reaction mechanism, which can be described as reaction (I) (Me (Metal)-OH + HO-Si → Me-O-Si + H₂O) and reaction (II) (Si-OH + Si-OH → Si-O-Si + H₂O). During film forming process, the formation of Si-O-Fe bond (reaction (I)) exhibited oscillatory phenomenon, the condensation degree of silanol monomers (reaction (II)) increased continuously. The metal hydroxyl density had significant influence on the growth mechanisms and corrosion resisting property of γ-GPS films. The results from theoretical calculation section indicated that the patterns of reaction (I) and reaction (II) were similar, involving a nucleophilic attack on the silicon center. The formation of Si-O-Fe bond (reaction (I)) was kinetically and thermodynamically preferred, which had catalytic effect on its condensation with neighboring silanol monomers (reaction (II)). Our DFT calculations were good consistent with the experimental measurements.