两亲性ABA三嵌段共聚物的合成及其自组装行为研究

用Grubbs第二代催化剂引发降冰片烯类单体(NBEDE)和链转移剂在离子液体[bmim][BF4]中的开环易位聚合(ROMP)反应,反应体系保持均相,无聚合物析出,得到两端为叔溴的遥爪型官能化聚合物(Br-PNBEDE-Br).以Br-PNBEDE-Br作为大分子引发剂,在离子液体介质中引发甲基丙烯酸2-(二甲氨基)乙酯(DMAEMA)的原子转移自由基聚合(ATRP),制得分子量分布较窄的两亲性三嵌段共聚物(PDMAEMA-PNBEDE-PDMAEMA).利用动态激光光散射(DLS),原子力显微镜(AFM),透射电镜(TEM)等技术,考察嵌段共聚物在选择性溶剂/共溶剂(H2O/THF)中的胶束行为,以及溶液pH值对胶束的影响.结果表明,TEM观察到胶束为球形,由于TEM和AFM是在干态下测得胶束的粒径,而DLS是在溶液中测定胶束的流体力学直径,所以TEM和AFM得到的胶束粒径小于DLS的结果.不同pH值对胶束尺寸大小有明显的影响,胶束微粒随着pH值的增大而增大.     

一类特殊分块矩阵为循环矩阵的循环分块矩阵的几个性质

本文给出一类特殊分块矩阵为循环矩阵的循环分块矩阵的几个性质。     

Polymerization of lactide and synthesis of block copolymer catalyzed by copper(Ⅱ) Schiff base complex

In the present investigation, the novel copper Schiff base complex was synthesized and its catalytic activity was evaluated for the ring-opening polymerization (ROP) of lactide and block polymerization of poly(lactide) with poly(ethylene glycol)methyl ether.     

Poly(ethylene terephthalate) copolymers containing 5‐nitroisophthalic units. II. Crystallization studies

The microstructure and crystallization behavior of a set of poly(ethylene terephthalate‐co‐5‐nitroisophthalate) copolymers (PETNI) containing 5‐nitroisophthalic units in the 10–50 mol % range were examined and compared to those of poly(ethylene terephthalate) (PET) and poly(ethylene terephthalate‐co‐isophthalate) (PETI) copolymers. A ¹³C NMR analysis of PETNI copolymers in a trifluoroacetic acid solution indicates that they are random copolymers with average sequence lengths in accordance with ideal polycondensation statistics. Differential scanning calorimetry (DSC) studies show that PETNI containing 5‐nitroisophthalic units up to 20 mol % are able to crystallize and that crystallization takes place in these copolymers at much slower rates than in PET. Wide‐angle X‐ray diffraction from powder and fibers reveals that crystallizable PETNI adopts the same triclinic crystal structure as PET, with the nitroisophthalate units being excluded from crystallites. Fourier transform infrared in combination with cross‐polarization/magic‐angle spinning ¹³C NMR spectroscopy demonstrates the occurrence of a gauche–trans conversion encompassing the crystallization process. A correlation between DSC and spectroscopic data leads us to conclude that the content of trans conformer in the noncrystallized phase of PETNI is higher than in both PET and PETI copolymers and suggests that secondary crystallization in the homopolymer must proceed by a mechanism different than that in copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1553–1564, 2001     

Block copolymer adsorption from a homopolymer melt to an amine-terminated surface

Using neutron reflectometry, the adsorption of diblock copolymers from a neutral polystyrene (PS) matrix is studied as a function of substrate type and non-adsorbing block degree of polymerization. The block copolymer is poly(deutero styrene)-block-poly(methyl methacrylate) and the substrates are silicon oxide, SiO_x, and SiO_x functionalized with (3-aminopropyl)triethoxysilane (APTES). We have determined the equilibrium volume fraction-depth profiles for such films, and compared them with volume fraction profiles generated by self-consistent mean-field (SCMF) theory and find good agreement between the experimental and theoretical data. SCMF calculations show that the segmental interaction energy between PS matrix chains and APTES is two orders of magnitude stronger than that between PS and SiO_x.     

Surface segregation of polypeptide-based block copolymer micelles: An approach to engineer nanostructured and stimuli responsive surfaces

We describe the surface segregation of polypeptide-based block copolymer micelles to produce stimuli-responsive nanostructures at the polymer blend/air interface. Such structures were obtained by simultaneous surface migration and self assembly at the surface of diblock copolymer/homopolymer blends. We employed blends composed of homopolymer (PS) and an amphiphilic block copolymer polystyrene-b-poly(l-glutamic acid) (PS-b-PGA). The surface was functionalized based on the preferential segregation to the polymer blend/air interface of the hydrophilic PGA block of the diblock copolymer upon annealing to water vapor. The surface migration of the diblock copolymer to the interface was demonstrated both by XPS and contact angle measurements. As a consequence, the PGA interfacial attraction leads to a large surface excess on diblock copolymer which in turn, through macrophase and microphase separation, produced separated domains at the surface with regions composed either of homo or block copolymer. Herein we demonstrate that the use of asymmetric diblock copolymers with a higher content in PS lead to spherical micellar assemblies randomly distributed at the surface. As observed by AFM imaging the blend composition, i.e. the amount of block copolymer within the blend influences the density of micelles at the surface. Finally, when exposed to water, the pH affects the surface morphology. The PGA segments are collapsed at low pH values and extended at pH values above 4.8, thus inducing variations on the topography of the films at the nanometer scale.     

Novel polyesteramide-based di- and triblock copolymers: From thermo-mechanical properties to hydrolytic degradation

Two types of biodegradable poly(ε-caprolactone (CLo))-co-poly(ε-caprolactam (CLa)) copolymers were prepared by catalyzed hydrolytic ring-opening polymerization. For the first type of materials, the respective cyclic comonomers were added simultaneously in the reaction medium leading to the formation of copolymers having a random distribution of co-units within the polyesteramide sequence, as evidenced by ¹H and ¹³C NMR. For the second type of copolymers, the cyclic comonomers were added sequentially in the reaction medium yielding diblock polyesteramides, again evidenced by NMR. The thermal and thermo-mechanical properties of the copolymers were investigated by DSC and DMA and correlated with the copolymer topology and composition. The copolymers were characterized by a storage modulus and α transition temperature intermediate to the modulus and T_g of the corresponding homopolymers. The chemical composition and molecular weight of the copolymers proved to have only a limited effect on the thermo-mechanical properties of the materials. The hydrolytic degradation of random copolymers was studied in a phosphate buffer at 60 °C and discussed in terms of chemical composition and molecular weight of the copolymers.     

Polyterephthalates made from Ethylene glycol, 1,4‐cyclohexanedimethanol,and isosorbide

Three series of terephthalate polyesters (copolyesters and terpolyesters) containing 70, 80, and 90 mol % of ethylene glycol respectively, 1,4‐cyclohexanedimethanol (CHDM) and isosorbide in varying ratios, were synthesized by melt polycondensation. It was found that only ～75 mol % of the feeding isosorbide was incorporated in the resulting polyesters and that their content in diethylene glycol oscillated between 2 and 4 mol %. The polyesters had weight‐average molecular weights in the 25,000–33,000 g mol^?1 range and polydispersities between 2 and 2.5. The combined ¹H and ¹³C NMR analysis revealed that the microstructure of all these polyesters was at random. They showed good thermal stability with decomposition temperatures above 400 °C. Their glass‐transition temperatures were observed to increase with the content in cyclic diols, this effect being more pronounced when isosorbide was the replacing comonomer. Only the series containing 90 mol % of ethylene terephthalate units was able to crystallize upon cooling from the melt. Compared isothermal crystallizations revealed that isosorbide was more effective than CHDM in repressing the crystallizability of PET. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Aggregation behavior of block polyethers with branched structure at air/water surface

The block polyethers with various branch structure, such as TEPA[(PO)₃₆(EO)₁₀₀]₇, TEPA[(PO)₃₆(EO)₁₀₀(PO)₃₆]₇, and TEPA[(PO)₃₆(EO)₁₀₀(PO)₅₆]₇ were synthesized. Moreover, the aggregation behavior was investigated via the measurements of equilibrium surface tension, dynamic surface tension, and surface dilational viscoelasticity, in order to probe the effect of the block structure on the property of the branched block polyethers. The surface tension results show that the efficiency and effectiveness of the block polyethers to lower surface tension increase with the increase of the PO group numbers. The maximum surface excess concentration (Γ_max) values and the minimum occupied area per molecule at the air/water interface (A_min) values of the branched block polyethers obtained from Gibbs adsorption equations increase and decrease with the increases of the PO group numbers, respectively. The dynamic parameters n and t^* representing the diffusion speed of the polyether molecules from bulky solution to the subsurface and from the subsurface to the air/water surface are obtained according to the equation proposed by Rosen. The results show that the n values firstly increase and then decrease and t^* values decrease with the increase of the polyether concentrations. The results of surface dilational viscoelasticity show that the dilational modulus of TEPA[(PO)₃₆(EO)₁₀₀(PO)₅₆]₇ is the largest among the three block copolymers at the low concentration (<1 mg L⁻¹) but that of TEPA[(PO)₃₆(EO)₁₀₀]₇ is the largest at the high concentration (>1 mg L⁻¹).     

嵌段共聚物在乳液聚合和分散聚合中的应用

综述了嵌段共聚物在乳液聚合和分散聚合中作为稳定剂应用的进展，主要讨论了共聚物化学组成，比例，分子量，浓度以及胶束形成等因素对聚合体系的影响。